Faculty

Admission Query

Submit

Mr. Harish Kumar Sharma

  • Assistant Professor
    Institute of Engineering & Technology

  • Department

    Department of Mechanical Engineering

  • Contact Details:

    Email : harish.shrma@gla.ac.in

    Contact Number :9259995661

  • Experience

    06 years Teaching/Research experience in the field of mechanical engineering

  • Qualifications

    • PhD (Pursuing-2019), (Solar Energy) National Institute of Technology, Jamshedpur, Jharkhand.
    • M,Tech (Design, Mechanical Engineering), (2010-2012) National Institute of Technology, Allahabad, India. -Secured the CPI of 8.1
    • B.Tech (Mechanical engineering), (2004-2008) Sachdeva Institute of Engineering (affiliated to Uttar Pradesh Technical University), Uttar Pradesh, India -Secured an aggregate of 71%.

  • Ph.D

    Thesis Supervised

  • Awarded/ Completed-

    Working-

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed-

    Working-

Journal (03 Scopus)

  • Harish Kumar Sharma, Gaurav Bharadwaj, Avdhesh Sharma, Piyush Singhal “NUSSELT NUMBER OPTIMIZATION FOR DPSAH HAVING INCLINED AND TRANSVERSE RIBS AS ROUGHNESS ELEMENT USING GENETIC ALGORITHM”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), Scopus Indexed,  ISSN: 2278-3075, Volume-8 Issue-6, April 2019, pp. 240–243.
  • Avdhesh Sharma, Harish Sharma, Gaurav Bhardwaj, Varun “NUSSELT NUMBER OPTIMIZATION FOR DOUBLE PASS SOLAR AIR HEATER HAVING V-SHAPE RIBS AS ROUGHNESS ELEMENT USING GENETIC ALGORITHM”, International Journal of Mechanical Engineering and Technology (IJMET), Scopus Indexed, Volume 9, Issue 13, December 2018, pp. 1302–1308.
  • Gaurav Bharadwaj, Harish Sharma, Avdhesh Sharma and Piyush Singal “OPTIMIZATION OF NUSSELT NUMBER FOR INCLINED RIBS USED AS ROUGHNESS ELEMENT IN SOLAR AIR HEATER DUCT”, International Journal of Mechanical Engineering and Technology (IJMET), Scopus Indexed, Volume 9, Issue 11, November2018, pp. 2272–2276.

International Conferences (03 Scopus)

  • Harish Kumar Sharma, Koushlendra kumar singh, Chandra Bhushan Tripathi, Satish Kumar, Shailesh Prasad, Kaushal Kumar, Piyush Singhal, “ENHANCEMENT OF LATENT HEAT ENERGY STORAGE SYSTEM USING NANOMATERIALS FOR DIFFERENT APPLICATIONS: A REVIEW”, Materials today: proceedings (Scopus Indexed), January 2020. https://doi.org/10.1016/j.matpr.2020.01.126
  • Harish Kumar Sharma, Sujit Kumar Verma, Pradeep Kumar Singh, Satish Kumar, Mani Kant Paswan, Piyush Singhal, “PERFORMANCE ANALYSIS OF PARAFFIN WAX AS PCM BY USING HYBRID ZINC-COBALT-IRON OXIDE NANO-FLUID ON LATENT HEAT ENERGY STORAGE SYSTEM”, Materials today: proceedings (Scopus Indexed), March 2020. https://doi.org/10.1016/j.matpr.2020.02.300
  • Kaushal Kumar, Satish Kumar, Chandra Bhushan Tripathi, Harish Kumar Sharma and Shashi Bhushan Prasad, “PARAMETRIC OPTIMIZATION OF SLURRY EROSION BEHAVIOUR OF BRASS”, Materials today: proceedings (Scopus Indexed), March 2020. https://doi.org/10.1016/j.matpr.2020.02.330
  • Harish Kumar Sharma, Satish Kumar, Mani Kant Paswan, Piyush Singhal. “Performance And Analysis Of Phase Change Material By Using Hybrid Nano Fluid (Zinc Cobalt Iron Oxide) On Thermal Energy Storage Device”, Proceeding of International Conference on Advances in Mechanical Processing and Design – 2019 (ICAMPD-2019), held in KIIT Bhubaneswar from October 18 to 20 2019, pp-37.
  • Harish Kumar Sharma, Piyush Singhal, Amit Kumar Sharma, Aditya Singh. “Design of Wearable Load Assisting Device for Porters-Phase One”, Proceeding of Advances and Soft Computing Applications in Design and Manufacturing (ASCADM–2018), held in NIT Patna from june 4 to 6 2018. ISBN: 978-93-86724-81-6, pp-95-98.
  • Harish Kumar Sharma, Amit Kumar Sharma, Aditya Singh and Piyush Singhal. “Digital Human Modeling using CATIA-V5 for the analysis & ergonomic improvements in design of Wearable Load Assisting Device for Porters”,  Proceeding of 15th International Conference on Humanizing Work and Work Environment (HWWE-2017), HELD IN AMU ALIGARH FROM DEC 8 TO 10 2017.
  • Harish Kumar Sharma, Pankaj Sonia and Piyush Singhal. “Computer Assisted Industrial Ergonomics: A Review”, Proceeding of International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems (MESH 2016).
  • Harish Kumar Sharma, Piyush Singhal and Rahul Goswami. “Review of Literature on Methods for Identification of Basic Ergonomic Considerations that Affect Employees in Workplace Environment”, Proceeding of 14th International Conference on Humanizing Work and Work Environment (HWWE-2016), ISBN Number: 978-93-83006-81-6, pp-458-463.
  • Rahul Goswami, Piyush Singhal and Harish Kumar Sharma. “Application of 10 Ergonomics Checkpoints for Improving Working Conditions and Productivity in Agriculture Sector of India”, Proceeding of 14th International Conference on Humanizing Work and Work Environment (HWWE-2016), ISBN Number: 978-93-83006-81-6, pp-418-423.

National Conferences

  • Soran Singh, Pankaj Sonia and Harish Kumar Sharma. “TENSILE BEHAVIOR AND FRACTOGRAPHIC ANALYSIS OF HYBRID EPOXY ALUMINA POLYMER NANOCOMPOSITE”, Proceeding of NATIONAL CONFERENCE ON PROCESS AUTOMATION AND CONTROL 2016.
  • Harish Kumar Sharma, 28-29 April 2007, “Alternative sources of Energy, Ethanol, Methanol, and Butanol” Recent Developments & Futuristic Trends In Mechanical Engineering (NCME-2007) SRCEM Banmore, Gwalior.

Book Chapters

  • Completed 12 days “Training on Basic Mechatronics” At SITRAIN Siemens Limited, Navi Mumbai, Maharashtra, from 13/01/2020 to 24/01/2020.
  • Completed two days awareness training on ‘Geometrical Dimensioning and Tolerancing’ organized by TUV SUD South Asia Pvt. Ltd. scheduled from August 31 – September 01, 2019 at GLA University Mathura.
  • Attended a five days short term course on ‘Solar Energy and Its Applications (SEA-2019)’ scheduled from October 11 - 15, 2019 at GLA University Mathura.
  • Attended a GIAN Course on ‘Energy, Education and Innovation’ offered by Prof. Yunus A. Çengel, Emeritus Professor, Department of Mechanical Engineering, University of Nevada, USA scheduled from March 12 - 16, 2018 at IIT Indore.
  • Attended a three days short term course on “Entrepreneurship Awareness Camp” by MSME-TDC (PPDC), Agra from August 17 to August 19 2017 at GLA University Mathura.
  • Attended a three days workshop on “Lean Six Sigma Yellow Belt: Quality Improvement and Problem Solving Techniques” by MSME-TDC (PPDC), Agra from April 28 to April 30 2017 at GLA University Mathura.
  • A five days workshop on , Nanostructured Carbon Doped Nanocomposits for Energy Storage Applications organized by  IIT Kanpur from jan 11 to jan 15 2016 at IIT Kanpur.
  • A five days workshop on Fundamentals of Engineering Tribology Application Organized by IIT Delhi from Dedember 07 to 11 2015 at IIT Delhi.
  • Attended a two days seminar on DETECTION AND TREATMENT OF CANCER USING NANO AND CONVENTIONAL TECHNOLOGIES organized by GLA UNIVERSITY from 28 nov to 29 nov 2015.
  • Attended a short term course on BASIC COURSE FOR DYNAMIC LIGHT SCATTERING organized MALVERN INSTRUMENTS in GLA University in 2015.
  • Attended a five days short term course on DIGITAL PROTOTYPING WITH AUTODESK TOOLS (DPAT 2015) organized by MNNIT ALLAHABAD from 27 Feb TO 4 Mar 2015.
  • International conference – International Conference of Modeling and Simulation (CITICOMS-2007), from 27-29 December at Coimbatore institute of technology, Coimbatore, Presented a paper titled as” “Genetic Algorithm – its significance in minimizing Musculoskeletal Disorders”.
  • Branding Incharge
  • Website Incharge
  • Machine Design LAB
  • Mechatronics LAB
  • Member, Admission Responsibilities
  • Member, BOS, GLA University
  • Member of Departmental NAAC Committee, GLA University.
  • Member of Departmental NBA Committee, GLA University.
  • Class advisor
  • Successfully coordinated Three days Scopus Indexed 10th “International Conference on Materials Processing and Characterization” (ICMPC 2020), 21–23 February 2020 at GLA University Mathura.
  • “Solar Energy and its Applications” (SEA-2019) during 11th to 15th October, 2019 as a joint-Coordinator at GLA University Mathura.
  • Successfully organized a Five days short term course on “Solar Energy and its Applications” (SEA-2019) during 11th to 15th October, 2019 as a joint-Coordinator at GLA University Mathura.
  • Successfully organized a three days short term course on “Entrepreneurship Awareness Camp” by MSME-TDC (PPDC), Agra from August 17 to August 19 2017 at GLA University Mathura.
  • Successfully organized a three days workshop on “Lean Six Sigma Yellow Belt: Quality Improvement and Problem Solving Techniques” by MSME-TDC (PPDC), Agra from April 28 to April 30 2017 at GLA University Mathura.
  • Qualified GATE examination in 2010.

Summer Internship

  • Organization-
    Project Title- ATUL Generators Pvt. Ltd. Nunhai Agra (U.P.)
    Duration- One month (15/06/2006 to 14/07/2006)
    Brief Description- I was assigned in generator shop, where I learnt assembly, working and testing of electric generators.
  • Organization-
    Project Title- HERO MOTORS LIMITED Dadri, Distt. Gautam Budh Nagar (U.P.)
    Duration- Six weeks
    Brief Description- I was assigned in Weld Shop, where I made a project on Minimization of Welding Defects in Swing Arm Assembly.

Institute Projects

  • Institute Name- MNNIT, Allahabad
    Project Title- THEORY OF PLANNED BEHAVIOUR AS APPLICABLE TO ENTREPRENEURSHIP BY INDIAN ENGINEERING STUDENTS
    Duration- 12 months
    Brief Description- ATTITUDE, subjective norm and self efficacy will predict entrepreneurial intentions in Indian engineering students. Combination of the three forms model for Theory of planned behavior to find the interventions to be used for increasing entrepreneurial intentions.
  • Institute Name- S.I.T. Mathura
    Project Title- Compressor less solar powered refrigeration system
    Duration- 12 months
    Brief Description- Compressor less solar powered refrigeration system uses the Peltier effect to create a temperature difference between the JUNCTIONS of two different types of materials. The current drives a transfer of heat from one junction to the other, as a result one junction cools off while the other heats up. So it can be used to heat and to cool as well, depending on the direction of the current. Solar powered electrical energy is being used for current (DC) supply.