Admission Inquiry

Mr. Aman Sharma

Mr. Aman Sharma

  • Assistant Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Experience

    4 Years

  • Qualifications

    • Master of Technology (2020) Production Engineering from GLA University, Mathura (INDIA)
    • Bachelor of Technology (2016), Mechanical Engineering from Gurukul Kangri Vishwavidhlaya, Faculty of Engineering and Technology, Haridwar, (INDIA)
    • Diploma In Mechanical Engineering (2013) from Board of Technical Education Lucknow.
  • Ph.D

    Thesis Supervised

  • Awarded/ Completed-

    Working-

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed-

    Working-

2022

  • 01 Aman Sharma, Rishabh Chaturvedi, Kamal Sharma, Manish Saraswat, “Force Evaluation and Machining Parameter Optimization In Milling Of Aluminium Burr Composite Based On Response Surface Method”, Advances In Material And Processing Technologies Taylor And Francis, Https://Doi.Org/10.1080/2374068x.2022.2036586.
  • 02 Kuwar Mausam, Aman Sharma, Rishabh Chaturvedi OPTIMIZATION OF MAG WELDING PARAMETERS USING MATHEMATICAL AND VARIOUS SIMULATION MODELS International Journal of Mechanical Engineering ISSN: 0974-5823 Vol. 7 No. 1 January, 2022.
  • 03 Rishabh Chaturvedi, Aman Sharma Assessment of Weld Quality and Impact of Process Parameters for Aluminum-Copper through MPW International Journal of Mechanical Engineering ISSN: 0974-5823 Vol. 7 No. 1 January, 2022.
  • 04 Rishabh Chaturvedi, Anas Islam, Aman Sharma (2022). Analysis on Manufacturing Automated Guided Vehicle for MSME Projects and Its Fabrication. In Computational and Experimental Methods in Mechanical Engineering (pp. 357-366). Springer, Singapore.
  • 05 Aman Sharma ; Rajat Yadav Vikas Kumar Sharma, Acquiring FG Homogeneous Composite Shell Structure Using Finite Element Analysis, (2022) Smart Innovation, Systems and Technologies, 239, pp. 215 - 225, DOI: 10.1007/978-981-16-2857-3_23
  • 06 Aman Sharma Chaturvedi, Rishabh; Singh, Pradeep Kumar, Efficient Activated Metal Inert Gas Welding Procedures by Various Fluxes for Welding Process. (2022) Smart Innovation, Systems and Technologies, 239, pp. 419 - 427, DOI: 10.1007/978-981-16-2857-3_42 .
  • 07 Aman Sharma, Rishabh Chaturvedi, Manish Saraswat, Ravi Kalra (2022) Weld reliability characteristics of AISI 304L steel welded with MPAW (Micro plasma arc welding) materials today proceedings, https://doi.org/10.1016/j.matpr.2022.01.205
  • 08 Chaturvedi, Rishabh; Aman Sharma; Sharma, Kamal (56047171100); Saraswat, Manish , Nanotech Science as Well as Its Multifunctional Implementations, (2022) Lecture Notes in Mechanical Engineering, pp. 217 - 228, DOI: 10.1007/978-981-16-3330-0_18
  • 09 Dwivedi, Vijay Kumar ; Islam, Anas ; Aman Sharma Application of 5s Methodology in a Small-Scale Enterprise: Case Study (2022) Lecture Notes in Mechanical Engineering, pp. 29 - 36, Cited 0 times DOI: 10.1007/978-981-16-3135-1

2021

  • 01 Aman Sharma, Rishabh Chaturvedi, Pradeep Kumar Singh, and Kamal Sharma. "AristoTM robot welding performance and analysis of mechanical and microstructural characteristics of the weld." Materials Today: Proceedings 43 (2021): 614-622. https://doi.org/10.1016/j.matpr.2020.12.158.
  • 02 Aman Sharma, Pradeep Kumar Singh and Rohit Sharma Numerical Simulation of Temperature Distribution in Robotic Arc welding by ARISTOTM Robot IOP Conf Series: Materials Science and Engineering 1116 (2021) 012117 IOP Publishing doi:10.1088/1757-899X/1116/1/012117.
  • 03 Aman Sharma, Anas Islam, Kamal Sharma, and Pradeep Kumar Singh. "Optimization techniques to optimize the milling operation with different parameters for composite of AA 3105." Materials Today: Proceedings 43 (2021): 224-230 https://doi.org/10.1016/j.matpr.2020.11.649.
  • 04 Aman Sharma, Vikas Kumar Sharma, Kuwar Mausam, Analysis on thermal distinctiveness of compound polymers by micro filling erbium oxide, Volume 45, Part 2, 2021, Pages 2751-2754, https://doi.org/10.1016/j.matpr.2020.11.605.
  • 05 Rishabh Chaturvedi, Aman Sharma, A study on factors affecting the densification of spark plasma sintered ball milled 40 wt% Ni-Fe nano powder Volume 37, Part 2, 2021, Pages 3135- 3138.
  • 06 Rishabh Chaturvedi, Aman Sharma A study on factors affecting the densification of spark plasma sintered ball milled 40 wt% Ni-Fe nanopowder, Volume 37, Part 2, 2021, Pages 3135-3138, https://doi.org/10.1016/j.matpr.2020.09.027.
  • 07 Islam, Anas, Kamal Sharma, Aman Sharma, Biosensors—An Emerging Trending Biomedical Engineering, (2021) Lecture Notes in Mechanical Engineering, pp. 301 - 309, DOI: 10.1007/978-981-16-0942-8_28
  • 08 Yadav, Rajat; Aman Sharma, Structural dynamics of peptide nanotube and their conformational implication investigation by molecular modeling, molecular mechanics and molecular dynamics, (2021) Materials Today: Proceedings, 45, pp. 2934 - 2937, DOI: 10.1016/j.matpr.2020.11.942.
  • 09 Aman Sharma Singh, Pankaj Kumar Sharma, Vikas Kumar , Analysis on WH cement composite thermal insulation material for increasing efficiency of building (2021) Materials Today: Proceedings, 45, pp. 3036 - 3041, DOI: 10.1016/j.matpr.2020.12.056
  • 10 Singh, Pankaj Kumar; Singh, Pradeep Kumar Aman Sharma, Flame retardant FRP composites for marine application, (2021) Materials Today: Proceedings, 45, pp. 2946 - 2948, DOI: 10.1016/j.matpr.2020.11.945.
  • 11 Islam, Anas; Aman Sharma Singh, Pradeep Kumar , Performance study on customized solar still by optimum fins for production of distilled water, (2021) Materials Today: Proceedings, 45, pp. 3517 – 3520, DOI: 10.1016/j.matpr.2020.12.960

2020

  • 01 Aman Sharma, Kamal Sharma, Anas Islam, and Debanik Roy. "Effect of welding parameters on automated robotic arc welding process." Materials Today: Proceedings 26 (2020): 2363-2367. https://doi.org/10.1016/j.matpr.2020.02.507.
  • 02 Aman Sharma, and Vijay Kumar Dwivedi. "Effect of Spindle Speed, Feed Rate and Cooling Medium on the Burr Structure of Aluminium through Milling." In IOP Conference Series: Materials Science and Engineering, vol. 998, no. 1, p. 012028. IOP Publishing, 2020 doi:10.1088/1757-899X/998/1/012028.
  • 03 Aman Sharma, Vijay Kumar Dwivedi, Anas Islam, Nikhil Sharma Design and Simulation Analysis of Gas Turbine Blade with Variation in Blade Angle 83 Issue ISSN: 0193-4120 Pages 13130 – 13142 Test Engineering and Management.
  • 04 Aman Sharma, and Kamal Sharma, Rohit Sharma. "Design and Analysis of Chassis and Powder based Additive Manufacturing for Chassis of Under Water Robot." Vol. 83: May/June 2020 Volume 83 Page Number: 13109-13116.
  • 05 Rishabh Chaturvedi, Anas Islam, Aman Sharma, Kamal Sharma, Rohit Sharma “Design and Analysis of Mechanical Gripper of Aristo-Robot for Welding” Volume 83April 2020 ISSN: 0193-4120 Pages 23202 – 23209.
  • 06 Islam, Anas, Shailesh Sharma, Kamal Sharma, Rohit Sharma, Aman Sharma, and Debanik Roy. "Real-time data monitoring through sensors in robotized shielded metal arc welding." Materials Today: Proceedings 26 (2020): 2368-2373. https://doi.org/10.1016/j.matpr.2020.02.508.
  • 07 Aman Sharma, An intelligent position control using priority based fitness scheme and optimal tuning of fuzzy logic controller parameters with binary bat algorithm for nonlinear gantry crane system, Journal of Green Engineering Volume 10, Issue 11, November 2020, Pages 11687-11700.
  • 08 Nitin Kukreja, Aman Sharma A lightweight and multi objective optimization of selected complex mechanical system components using cooperative firefly algorithm Journal of Green Engineering Volume 10, Issue 11, November 2020, Pages 12216- 12231.
  • 09 Anas Islam Aman Sharma Rishabh Chaturvedi, Investigation of tribological properties of aluminum oxide reinforced aluminum alloy composites, Journal of Green Engineering Volume 10, Issue 10, October 2020, Pages 8885-8895.
  • 10 Yadav, Rajat Aman Sharma, In-situ synthesis of silica coated titania nanoparticles in an aerosol reactor, (2020) Materials Today: Proceedings, 37 (Part 2), pp. 3031 - 3034, DOI: 10.1016/j.matpr.2020.08.727

Patents

Granted

  • 01Aman Sharma A mechanical gripper with controlled operations for robotic arc welding (about to grant) patent no- 202011036215

Published

  • 01 Sharma, S., Islam, A., Aman Sharma, Chaturvedi, R., Sharma, K., Sharma, R., Roy, D., (2020), India Patent No. 202011050119. Delhi, India: Intellectual Property India.
  • 02 Aman Sharma., A quality inspection welding gripper patent no-202011051813 (published)
  • 03 Aman Sharma., Waste elimination of PLA material coming out form 3d printer by using an optimized heating chamber Patent No 202111008895 (published)
  • 04 Aman Sharma., Hi-tech light beam adjustment for 4 wheelers Patent No 202011055706 (published)
  • 06 Aman Sharma., Solar powered enabled motor operated extended cycle for railway track inspection patent no. 202011052293 (published)
  • 07 Aman Sharma Automatic leg before wicket (LBW) detector in cricket using impact range ultrasonic sensors Patent No 202011046212 (published)
  • 08 Aman Sharma., A hydraulic sensors-based suspension system inspired by kangaroo leg (published).
  • 01 International Conference on Recent Advances in Engineering And Science (ICRAES- 20220) Aligarh Muslim university, Aligarh
  • 02 10th International Conference on Materials Processing and Characterization (ICMPC 2020) GLA University Mathura.
  • 03 3rd International Congress on Advances In Mechanical Sciences (ICAMS- 2020) Vardhman College of Engineering, Kacharam, Hyderabad.
  • 04 2nd International Conference On engineering technology and management of the sustainable development (ICESMSD-2020) IIMT Engineering College Meerut.
  • 05 1st International Conference on Energy Materials Sciences and Mechanical Engineering (EMSME - 2020) organized by National institute of technology (NIT DELHI).
  • 06 International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET-2020) GLA University Mathura
  • 07 International Conference on Advances in Sustainable Technologies (ICAST 2020) at Lovely Professional University.
  • 08 International Conference on Newer trends and Innovations in Mechanical Engineering, ICONTIME 2020Trichy, Tamil Nadu

Webinars

  • 01 Faculty Development Program (E-Fdp) On "Modern Trends in Manufacturing and Thermal Sciences (Mtmts-2022)" Organized by Department Of Mechanical Engineering, Nit Delhi, India During April 5 - April 10, 2022.
  • 02 One Week Online International Faculty Development Program on Research and Development In Materials Behaviour: Processing And Characterization Techniques From 9-14 June 2020 Organised By Department Of Mechanical Engineering. GLA University Mathura in Association with The Indian Institute of Metals (IIM)
  • 03 6-Day Short-Term Training Programmed Series on Advances in Tribology And Surface Engineering: Mechanical Engineering of Saintgits College Of Engineering, Kottayam From 1 September, 2020.
  • 04 Researches In Surface Engineering of Reliable Technology Organized by Girjananada Chowdhary Institute of Management and Technology, Guwahati 1-5 Sept 2020
  • 05 STTP On Application of Optimization Techniques in Mechanical Engineering Research AOTMER 7-11 Aug 2020 Organised by Vartika Projects
  • 06 TEQIP 3 One Week FDP On Recent Advancement on Materials and Its Applications Rama 2020 (Veer Surendra Rai University of Technology Odisha India 15-19 Sept 2020
  • 07 6-Day (One Week) All India Council for Technical Education, New Delhi Sponsored Online Short-Term Training Programmed (STTP) Series on Advances In Tribology And Surface Engineering: Series 1 Of 4 Introduction To Tribology And Surface Engineering Mechanical Engineering Of Saintgits College Of Engineering, Kottayam From 17 2020.
  • 08 Tribology And Sustainability 5 Days Short Term Course Organized by SRM Institute of Engineering and Technology 24 -28 August 2020
  • 09 Workshop On Robotics Organized by SVR InfoTech Pune 14-18 June 2019
  • 10 Dropout Neural Network Sigillieum Software Consultants Pvt Ltd Chennai, Tamil Nādu 11 July 2020

NCC ‘C’ certificate and ‘B’ certificate

Research Interests

  • Robotics
  • Robotic welding
  • Burr formation
  • Sensors
  • Manufacturing
  • Industrial and production engineering
  • Composite materials

Teaching experience – 2 years

  • Assistant Professor - Department of Mechanical Engineering, GLA University, Mathura (INDIA), 07/2020 – till date

Industrial experience – 2 years

  • Graduate trainee engineer – Maintenance and Quality Control Department MAYA MACHINERY PVT. LTD SAHARANPUR (U.P)