Admission Inquiry

Dr. Pradeep Kumar Singh

  • Assistant Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Experience

    8 Years +

  • Qualifications

    • PhD (Mechanical Engineering): GLA University, Mathura, U.P., India.
    • M.E.(Thermal Engineering) : RGPV, Bhopal, M.P., India.
  • Ph.D

    Thesis Supervised

  • Awarded/ CompletedNIL


  • Postgraduate

    Thesis Supervised

  • Awarded/ CompletedNIL


International Journal

  • Pankaj Kumar Singh; Kamal Sharma; Pradeep Kumar Singh, “Effect of Filler Materials with Different Cross Sections on the Performance of Dielectric Polymer Actuators” International Journal of Engineering and Advanced Technology (IJEAT) (Scopus), June 2019, (B Impact Factor 5.97), ISSN: 2249-8958 (Online), Volume-8, Issue-5, pp. 2698-2705.
  • P K Singh and K Sharma, “Molecular Dynamics Simulation of Glass Transition Behaviour of Polymer based Nanocomposites” Journal of Scientific & Industrial Research (SCI), 2018, (Impact Factor 0.735), Vol.77, Issue 10, pp. 592-595.
  • Mausam Kuwar; Sharma Kamal; Singh Pradeep Kumar; Aniruddha, “Optimization of Process Productivity for Multi Phase Carbon Nanotubes (CNT) Reinforced Nanocomposites Using Taguchi-Fuzzy Model” Advanced Science Letters (American Scientific Publishers), August 2018, Vol. 24, Number 8, pp. 5566-5569.
  • Pradeep Kumar Singh; Kamal Sharma, "Mechanical and Viscoelastic Properties of In-situ Amine Functionalized Multiple Layer Grpahene /epoxy Nanocomposites" Current Nanoscience (SCI), 2018, (Impact Factor 1.306), Vol. 14, Issue 3, pp. 252-262.
  • Anurag Yadav; Amit Kumar; Pradeep K. Singh; Kamal Sharma, “Glass transition temperature of functionalized graphene epoxy composites using molecular dynamics simulation” Integrated Ferroelectrics (SCI), 2018 (Impact Factor 0.457), Vol. 186, Issue 1, pp. 106-114.
  • Pradeep Kumar Singh; Kamal Sharma; Amit Kumar; Mukul Shukla, “Effects of Functionalization on the mechanical properties of multi-walled carbon nanotubes: A molecular dynamics approach.”, Journal of Composite Materials (SCI), 2016/2017 (Impact Factor 1.613) Vol. 51, Issue 5, pp. 671-680.
  • Amit Kumar; Pradeep Kumar Singh; Kamal Sharma; Mukul Shukla, “Comparative study of vacancy and Stone-Thrower-Wales patterns on elastic moduli of carbon nanotubes and their composites using molecular dynamics simulation.”, Computational Condensed Matter (Communicated) (ELSEVIER).
  • Vishal Bhasin; Pradeep Kumar Singh; S.S. Sikarwar; Arun Singh, “Mechanical Sun Tracking System”, in International Journal of Applied Engineering Research (IJAER), 2011,Vol.6, No.18, pp. 2535-2540. (


  • Amit Kumar; Pradeep K Singh; Kamal Sharma; Vijay K Dwivedi, “Evaluation of elastic moduli for different patterns of Stone-Thrower-Wales defect in Carbon Nanotubes/epoxy composites” in INTERNATIONAL CONFERENCE ON RECENT TRENDS IN ENGINEERING AND MATERIAL SCIENCES (ICEMS-2016) March 17-19, 2016, JNU Jaipur, Materials Today: Proceedings (Scopus), Volume 4, Issue 9, pp. 9423-9428, 2017.
  • Amit Kumar; Kamal Sharma; Pradeep K Singh; Vijay K Dwivedi, “Mechanical characterization of vacancy defective single-walled carbon nanotube/epoxy composites” in 5th INTERNATIONAL CONFERENCE OF MATERIALS PROCESSING AND CHARACTERIZATION (ICMPC 2016), 12-13 March, 2016, GRIET, Hyderabad, Telangana State, India , Materials Today: Proceedings (Scopus), Volume 4, Issue 2, Part A, pp. 4013-4021, 2017.
  • Kuwar Mausam; Pradeep Kumar Singh; Dr. Kamal Sharma; Dr. R.C. Gupta, “Investigation of Process Parameter of EDM using Genetic Algorithm (GA) Approach for Carbon Fiber based Two Phase Epoxy composites” in International Conference on Materials Research and Applications (ICMRA -2016), 11–13th March 2016, Department of Physics, CMR Technical Campus, Hyderabad, Telangana State, India, Materials Today: Proceedings (Scopus), Volume 3, Issue 10, Part B, pp. 4102-4108, 2016.
  • Kumar, A.; Sharma, K.; Singh, P.K.; Ashraf, J., “Effect of Different Vacancy Patterns on the Mechanical Properties of Single-walled Carbon Nanotubes using Molecular Dynamics” in 3rd INTERNATIONAL E- WORKSHOP/CONFERENCE ON COMPUTATIONAL CONDENSED MATTER PHYSICS AND MATERIALS SCIENCE (IWCCMP-2015), 18-22 October, 2015, ABV-IIITM Gwalior (M.P.).
  • Mausam, K.; Singh, P.K.; Sharma, K.; Gupta, R.C., “Investigation of optimum process parameters of a high speed EDM using a Grey  Relational Analysis for Multiscale Carbon Fiber Nano Composite” in International conference on Recent advances in Nano-Science and Technology (RAINSAT-2015) during July 8-10th , 2015, Sathyabama University, Chennai, Materials Today: Proceedings, (Accepted for publication).


  • Singh. P.K., "Study & Evaluation of Injection Timing of CI Engine FIP using Biodiesel as a fuel" in National Conference on Advancement in Research & Development in Science & Technology (NCARDST), RKDFIST, Bhopal, 7-8 February 2014.
  • Bhasin V.; Singh P.K.; Sikarwar S.S.; Singh A., "Introduction to Sindhu Type Solar Farming" in National Conference on Emerging Trends in Mechanical Engineering (ETME), F.E.T.R.B.S College, Agra, 17-18 Sept. 2011.

Short term Courses / Workshops Attended

  • Attended Five Days Short Term Course on “Solar Energy & Its Applications” organized by Department of Mechanical Engineering, IET, GLA University, Mathura (U.P.) during October 11-15th, 2019.
  • Attended Awareness training on “Geometrical Dimensioning and Tolerancing” organized by Academy Division of TÜV SÜD South Asia Pvt. Ltd. held on: 31st August, 2019 to 01st September, 2019 at GLA University, Mathura (Certificate No.: TUVSA/2019/CGDT/22/0002/0004/0015).
  • Attended NPTEL Online Certification Course (MOOC) on “Laws of Thermodynamics” funded by the Ministry of HRD, Govt. of India, during Aug-Sep 2018 (4 week) organized by IIT Kharagpur.
  • Attended a Short Term QIP Course on “ TEM and HRTEM in Materials Characterization (TEM/HRTEM-2017)” organized by Department of Materials Science & Engineering, IIT Kanpur, Uttar Pradesh, India-208016 during September 18th-22nd, 2017.
  • Attended a CoE (TEQIP-II) Sponsored Short Term Course on “ Advanced Materials and Processing (AMP-2017)” organized by Department of Physics, NIT Durgapur, West Bengal, India-713209 during March 06-10, 2017.
  • Attended a workshop on “Synthesis, characterization, processing and applications of nonmaterial’s” organized by GIAN, Ministry of Human Resource Development, Govt. of India and Department of metallurgical and materials engineering, NIT Warangal, Telangana State, India during 07th-11th March 2016.
  • Attended a short term course on “Digital Prototyping with Autodesk Tools (DPAT-2015)” during Feb 27-March 4, 2015 at Department of Mechanical Engineering, MNNIT Allahabad, UP, India.
  • Attended faculty orientation programme on “Entrepreneurship Development & Small Business Management” organized by HARDICON Limited under Techno-Entrepreneurship Cell under the aegis of Department of Science & Technology, Govt. of India during 20 Jan 2011 – 22 Jan 2011 at Faridabad.
  • Student member of American Society of Mechanical Engineers (ASME).
  • Member of Indian Institute of Metals (IIM).
  • Lab Incharge of Heat and Mass Transfer Lab
  • Member of Refrigeration and Air-Conditioning Lab
  • B.Tech:ME-3rd Year Coordinator since July 01, 2019 to till date
  • Member of Mission Admission Team- Basti