Admission Inquiry

Mr. Avdhesh Kumar Sharma

Mr. Avdhesh Kumar Sharma

  • Assistant Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Experience

    9+ Years

  • Qualifications

    • Doctor of Philosophy (Pursuing) Institute of Eng. & Technology, GLA University, Mathura.
    • Master of Technology (2012) Department of Mechanical Engineering, NIT, Hamirpur.
    • Bachelor of Technology (2010), Anand Engineering College, Agra (UPTU)
  • Ph.D

    Thesis Supervised

  • Awarded/ Completed-

    Working-

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed-

    Working-

2021

  • 01Avdhesh Kumar Sharma, Prashant Dixit and Shashank Srivastava. “ FEM analysis of water surface profile using VOF Method”, IOP Conference Series: Material Science and Engineering, 2021, Volume 1116.
  • 02Avdhesh Kumar Sharma. “ EDM Process Parameters Impact on MRR and TWR for Titanium Alloy [Ti6al4v] and their Optimization Using Taguchi and Topsis Method-An experiential Analysis”, IOP Conference Series: Material Science and Engineering, 2021, Volume 1116.
  • 03Avdhesh Kumar Sharma.“ Construction and Performance Analysis of a New Natural Convection Solar Dryer for Drying of Tomatoes and Green Chillies”, IOP Conference Series: Material Science and Engineering, 2021, Volume 1116.
  • 04Avdhesh Kumar Sharma and Harish Kumar Sharma.“ Cooling rate and Micro-structural Characteristic evaluation of HSLA steel”, IOP Conference Series: Material Science and Engineering, 2021, Volume 1116.

2020

  • 05Avdhesh Kumar Sharma and Gaurav Bhardwaj, “Optimizing Machining Parameters of EDM for Titanium Alloy [Ti 6al-4v eli] by Taguchi method and Promethee method- an exploratory investigation” , International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 2, Apr 2020, pp. 727–736, ISSN (P): 2249–6890; ISSN (E): 2249–8001

2019

  • 06Gaurav Bharadwaj, Avdhesh Sharma and V.K.Dwivedi, “Augmentation of thermal efficiency of PTC using CeO2 nanofluids”, International Journal of Engineering and Advanced Technology (IJEAT), 2019, Volume 9, pp-20-26, ISSN: 2249 – 8958.
  • 07 Gaurav Bharadwaj, Avdhesh Sharma, Manish Rawat and Piyush Singhal, “Analysis of Energy storage system by using Aluminum oxide nanofluid (Al2O3) with paraffin wax”, Material Todays- Proceeding (ICMPC-2020), 2019, 26:501-505. https://doi.org/10.1016/j.matpr.2019.12.125.
  • 08Sharma, H.K., Bharadwaj, G., Sharma, A., Singhal, P. “Nusselt number optimization for DPSAH having inclined and transverse ribs as roughness element using genetic algorithm”. Engineering Volume 8, Issue 6, April 2019, Pages 240-243.

2018

  • 09Gaurav Bharadwaj, Vikas Sharma, Avdhesh Sharma, “Correlations Development for Nusselt Number and Friction Factor of Roughened Double Pass Solar Air Heater Duct”,International Journal of Engineering and Advanced Technology (IJEAT), 2018, Volume 7 (COMET 2018), pp-20-26, ISSN : 2249 – 8958. (UGC Approved)
  • 10Avdhesh Sharma, Harish Sharma, Gaurav Bharadwaj and Varun, “Nusselt number optimization for Double pass solar air heater having V-shape ribs as roughness element Using genetic algorithm”, International Journal of Mechanical Engineering and Technology (IJMET), 2018, Volume 9, Issue 13, pp. 1302–1308, ISSN Print: 0976-6340 and ISSN Online: 0976-6359.
  • 11Gaurav Bharadwaj, Harish Sharma, Avdhesh Sharma and Piyush Singhal, “Optimization of Nusselt number for inclined ribs used as roughness element in solar air heater duct”, International Journal of Mechanical Engineering and Technology (IJMET), 2018, Volume 9, Issue 11, pp. 2272–2276, ISSN Print: 0976-6340 and ISSN Online: 0976-6359.

2017

  • 12Avdhesh Sharma, Gaurav Bharadwaj and Varun. “Heat Transfer and Friction Factor Correlation Development for Double Pass Solar Air Heater Having V-Shaped Ribs as Roughness Elements”, International Journal of Experimental Heat Transfer (Taylor and Francis), 2017, Volume 30 (1). pp- 77-90.
  • 13Gaurav Bharadwaj, Varun, Rajeensh Kumar and Avdhesh Sharma, “Heat transfer augmentation and flow characteristics in ribbed triangular duct solar air heater: a numerical and experimental analysis”, International Journal of Green Energy (Taylor and Francis), 2017, Volume 14 (7) pp-587-598.

2013

  • 14 Avdhesh Sharma, Varun, Prashant Dhiman and Gaurav Bharadwaj. “Heat transfer and friction characteristics of double pass solar air heater having V-shaped roughness on the absorber plate”, International Journal of Sustainable and Renewable Energy, American Institute of Physics, 2013, Volume 5 (2). DOI: 10.1063/1.4794747.

2012

  • 15 Gaurav Bharadwaj, Varun and Avdhesh Sharma. “Thermohydraulic performance of an equilateral triangular duct with artificial roughness used in solar air heater”. International Journal of Mechanical and Industrial Engineering (IJMIE), ISSN No. 2231-6477, 2012, Volume 2 (3) pp-50-55.
  • 16 Avdhesh Sharma, Varun and Gaurav Bharadwaj. “Effect of artificial roughness on heat transfer and friction characteristics of double pass solar air heater”, International Journal of Mechanical and Industrial Engineering (IJMIE), ISSN No. 2231-6477, 2012, Volume 2 (3) pp-55-60.
  • 17 Sunil, Varun, Naveen and Avdhesh Sharma. “Construction and performance of an indirect solar dryer integrated with solar air heater”, Procedia Engineering (Elsevier Science), ISSN NO. 1877-7058, Volume 38, Issue 2012, pp-3260-3269. DOI: 10.1016/j.proeng.2012.06.377.

Reviewer of International Journal:

  • 1 IOP Conference Series Materials Science and Engineering (FSAET-2020).

Conferences Attended

International

  • 01 Attended and Paper Presented at International Conference on Advanced Research in Mechanical Engineering (ICARME-2012), May 19, 2012 organised by Interscience Open Assess Journal at Nainital (U.K).
  • 02 Attended and Paper Presented “FEM analysis of water surface profile using VOF Method” at Futuristic and Sustainable Aspects in Engineering and Technology FSEAT-2020, Dec 18-19, 2020 organised by GLA University, Mathura.
  • 03 Attended and Paper Presented “EDM Process Parameters Impact on MRR and TWR for Titanium Alloy [Ti6al4v] and their Optimization Using Taguchi and Topsis Method-An experiential Analysis” at Futuristic and Sustainable Aspects in Engineering and Technology FSEAT-2020, Dec 18-19, 2020 organised by GLA University, Mathura.
  • 04 Attended and Paper Presented “Construction and Performance Analysis of a New Natural Convection Solar Dryer for Drying of Tomatoes and Green Chillies” at Futuristic and Sustainable Aspects in Engineering and Technology FSEAT-2020, Dec 18-19, 2020 organised by GLA University, Mathura.
  • 05 Attended and Paper Presented “Cooling rate and Micro-structural Characteristic evaluation of HSLA steel” at Futuristic and Sustainable Aspects in Engineering and Technology FSEAT-2020, Dec 18-19, 2020 organised by GLA University, Mathura.

National

  • 01Attended and Paper Presented at Conference on Mechanical Engineering and Technology (COMET-2018), March 31- April 01, 2018 organised by IIT (BHU), Varanasi.

Webinars/Workshops

Short term Courses Attended

  • 01 Attended two days Technical Training Programme on “Geometrical Dimensioning and Tolerancing” at GLA University, Mathura from 31st Aug to 01st Sept 2019 in association with TUV SUD South Asia Private Ltd.
  • 02 Attended five days short term course on “Solar energy and its applications” at GLA University, Mathura from 11th Oct to 15th Oct, 2019.
  • 01 Lifetime member of ndian Institute of Metals.

Research Interests

  • Solar air heater
  • Artificial roughness
  • Space heating
  • Space heating
  • Space heating
  • Space heating
  • Space heating

Teaching experience – 9+ years

  • Assistant professor - Department of Mechanical Engineering, GLA University, Mathura (INDIA), 23/07/2012 – till date.