Admission Inquiry

Mr. Gaurav Bharadwaj

Mr. Gaurav Bharadwaj

  • Assistant Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Experience

    11+ Years Teaching/Research experience in the field of Mechanical Engineering

  • Qualifications

    • Doctor of Philosophy (Pursuing) Institute of Eng. & Technology, GLA University, Mathura.
    • Master of Technology (2012) Department of Mechanical Engineering, NIT, Hamirpur.
    • Bachelor of Technology (2008), Ideal Institute of Technology, Ghaziabad (UPTU)
  • Ph.D

    Thesis Supervised

  • Awarded/ Completed-

    Working-

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed-

    Working-

2022

  • 01Kumar. R., Bharadwaj G., Kharub M., Goel V., Kumar A. “Performance analysis of nanofluid based direct absorption solar collector of different configuration: A two phase CFD modeling”, Energy Sources, Part A: Recovery, Utilization and Environmental effects. DOI: 10.1080/15567036.2022.2030439/li>
  • 02Dogra.S, Bhardwaj.G. “Heat transfer and friction factor correlations for rectangular double/two pass solar air heater with inclined and transverse ribs as roughness elements”, Materials Today: Proceedings, 2022, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2021.08.283.

2021

  • 03Bharadwaj G., Sharma. K. and Mausam. K. Factors influencing the performance of solar air heater (SAH) having artificial coarseness: A review. Journal of Thermal Engineering, 7(6), Pages-1556-76.
  • 04Bharadwaj G and Singh R.P. Efficiency of counter flow heat exchange in copper tube using APISN and XTRA KOOL oils. Material Todays- Proceeding. (SCOPUS) https://doi.org/10.1016/j.matpr.2021.04.386.
  • 05Bharadwaj G. Augmentation in Heat transfer and friction factor of SAH duct using artificial roughness. IOP Conference Series: Materials Science and Engineering, 2021, 116 (1), 012056.
  • 06Bharadwaj G. Performance Analysis of FPSC using hybrid nanofluid of Aluminum oxide and Titanium oxide. IOP Conference Series: Materials Science and Engineering, 2021, 116 (1), 012012.
  • 07Bharadwaj G., and Sharma. K. Exergetic performance evaluation of SAH with inclined ribs used as coarseness in triangular duct. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 2021, 12(2), 2060-69.

2020

  • 08Bharadwaj G. Synthesis and characterization of AL and Cu base nano fluids. Material Todays- Proceeding. https://doi.org/10.1016/j.matpr.2020.09.039

2019

  • 09Mausam, K., Sharma, K., Bharadwaj, G. and Singh, R.P. Multi-objective optimization design of die-sinking electric discharge machine (EDM) machining parameter for CNT-reinforced carbon fibre nanocomposite using grey relational analysis. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41(8), 348.
  • 10 Gaurav Bharadwaj, Avdhesh Sharma and V.K.Dwivedi, “Augmentation of thermal efficiency of PTC using CeO2 nanofluids”, International Journal of Engineering and Advanced Technology (IJEAT), 2019, Volume 9, pp-20-26, ISSN: 2249 – 8958.
  • 11 Gaurav Bharadwaj, Avdhesh Sharma, Manish Rawat and Piyush Singhal, “Analysis of Energy storage system by using Aluminum oxide nanofluid (Al2O3) with paraffin wax”, Material Todays- Proceeding (ICMPC-2020), 2019, 26:501-505. https://doi.org/10.1016/j.matpr.2019.12.125.
  • 12 Gaurav Bharadwaj, Kamal Sharma and Arun Tiwari, “Performance analysis of hybrid pcm by doping Graphene”, Material Todays- Proceeding (ICMPC-2020), 2019, 26:850-853.
  • 13 Sharma, H.K., Bharadwaj, G., Sharma, A., Singhal, P. Nusselt number optimization for DPSAH having inclined and transverse ribs as roughness element using genetic algorithm. Engineering Volume 8, Issue 6, April 2019, Pages 240-243.

2018

  • 14Gaurav Bharadwaj, Vikas Sharma, Avdhesh Sharma, “Correlations Development for Nusselt Number and Friction Factor of Roughened Double Pass Solar Air Heater Duct”, International Journal of Engineering and Advanced Technology (IJEAT), 2018, Volume 7 (COMET 2018), pp-20-26, ISSN : 2249 – 8958. (UGC Approved)

2017

  • 15 Avdhesh Sharma, Gaurav Bharadwaj and Varun. “Heat Transfer and Friction Factor Correlation Development for Double Pass Solar Air Heater Having V-Shaped Ribs as Roughness Elements”, International Journal of Experimental Heat Transfer (Taylor and Francis), 2017, Volume 30 (1). pp- 77-90.
  • 16 Gaurav Bharadwaj, Varun, Rajeensh Kumar and Avdhesh Sharma, “Heat transfer augmentation and flow characteristics in ribbed triangular duct solar air heater: a numerical and experimental analysis”, International Journal of Green Energy (Taylor and Francis), 2017, Volume 14 (7) pp-587-598.

2013

  • 17 Avdhesh Sharma, Varun, Prashant Dhiman and Gaurav Bharadwaj. “Heat transfer and friction characteristics of double pass solar air heater having V-shaped roughness on the absorber plate”, International Journal of Sustainable and Renewable Energy, American Institute of Physics, 2013, Volume 5 (2). DOI: 10.1063/1.4794747
  • 18 Gaurav Bharadwaj, Maneesh Kaushal and Varun. “Heat transfer and friction characteristics of equilateral triangular solar air heater duct using inclined continuous ribs as roughness element on the absorber plate”, International Journal of Sustainable Energy (Taylor and Francis), 2013, Volume 32 (6) pp-515-530.

Reviewer of International Journal:

  • 01 Energy Exploration and Exploitation, SAGE Publication.
  • 02 Materials Today- Proceeding, Elsevier (ICMPC-2020).
  • 03 IOP Conference Series Materials Science and Engineering (FSAET-2020).
  • 04 International Journal of Energy Research, Wiley Publication.
  • 05 IEEE Xplore (SASM-2021)

Collaboration(s)

  • 01 NIT, Hamirpur, India
  • 02 Chandigarh Engineering College, Chandigarh, India
  • 03 Lovely Professional University, Jalandhar, India

Conferences Attended

International

  • 01 Attended and Paper Presented at International Conference on Advanced Research in Mechanical Engineering (ICARME-2012), May 19, 2012 organised by Interscience Open Assess Journal at Nainital (U.K).
  • 02 Attended and Paper Presented “Analysis of Energy storage system by using Aluminum oxide nanofluid (Al2O3) with paraffin wax” at International Conference on Material Processing and Characterization (ICMPC-2020), Feb 21-23, 2020 organised by GLA University, Mathura.
  • 03 Attended and Paper Presented “Performance analysis of hybrid pcm by doping Graphene” at International Conference on Material Processing and Characterization (ICMPC-2020), Feb 21-23, 2020 organised by GLA University, Mathura.
  • 04 Attended and Paper Presented “Performance Analysis of FPSC using hybrid nanofluid of Aluminum oxide and Titanium oxide” at Futuristic and Sustainable Aspects in Engineering and Technology FSEAT-2020, Dec 18-19, 2020 organised by GLA University, Mathura.
  • 05 Attended and Paper Presented “Augmentation in Heat transfer and friction factor of SAH duct using artificial roughness” at Futuristic and Sustainable Aspects in Engineering and Technology FSEAT-2020, Dec 18-19, 2020 organised by GLA University, Mathura.

National

  • 01Attended and Paper Presented at 1st National Conference on Thermal, Fluid and Manufacturing science (TFMS-2012), Jan 20-21, 2012 organised by C.K.Pithawalla College of Engineering and Technology, Surat and Institute of Engineers, Surat.
  • 02Attended and Paper Presented “Correlations Development for Nusselt Number and Friction Factor of Roughened Double Pass Solar Air Heater Duct”, at Conference on Mechanical Engineering and Technology (COMET-2018), March 31- April 01, 2018 organised by IIT (BHU), Varanasi.

Webinars/Workshops

Short term Courses Attended

  • 01 Attended five days short term course on “Advances in Thermal and Renewable system Design” at MANIT, Bhopal from 30th Nov to 4th Dec 2015.
  • 02 Attended two days Technical Training Programme on “Geometrical Dimensioning and Tolerancing” at GLA University, Mathura from 31st Aug to 01st Sept 2019 in association with TUV SUD South Asia Private Ltd.
  • 03 Attended five days short term course on “Solar energy and its applications” at GLA University, Mathura from 11th Oct to 15th Oct, 2019.
  • 04 Attended one-week International Faculty Development Program (Online) on “Advances in Energy and Materials Applications (AEMA-2020)” at GLA University, Mathura from 21th Sept. to 26th Sept, 2020.
  • 05 Attended two days Technical Training Programme on “Sensitization for Safe Work on Motor Vehicles with HV Systems” at GLA University, Mathura from 28th to 29th Nov, 2020 in association with TUV SUD South Asia Private Ltd.
  • 06 Attended five days FDP on Design, Modeling and Simulation of Sustainable Building Energy Systems" from 2021-06-07 to 2021-06-11 at Pimpri Chinchwad College of Engineering. (Atal portal)
  • 07 Attended Two weeks online course on “Laser based Manufacturing and Precision Engineering, Karyashala”, Sponsored workshop under Accelerate Vigyan Scheme by SERB (IIT Indore).
  • 01 Lifetime member of International Society of Heat and Mass Transfer.
  • 02 Professional membership of Institute for Engineering Research and Publications.
  • 03 Individual Member of SESI, Solar Energy Society of India.

Research Interests

  • Solar air heater
  • Artificial roughness
  • Space heating
  • Nanofluid
  • Nanoparticles
  • Solar collector
  • Heat transfer

Teaching experience – 11+ years

  • Assistant professor - Department of Mechanical Engineering, GLA University, Mathura (INDIA), 23/07/2012 – till date.
  • Lecturer - Department of Mechanical Engineering, VIT, Dadri, Noida, 01/01/2009-25/05/2010.