Admission Query

Ir. Ts. Dr. Mahendran Samykano

  • Assoc. Prof.
  • Contact Details:

    Email : mahendran@ump.edu.my

    Contact Number :+6016-6817799; +609-4246237

  • Experience

  • Qualifications

    • Doctor of Philosophy in Nanoengineering, (PhD)
      University: Joint School of Nanoscience & Nanoengineering, North Carolina A&T State University, USA
      Award: Dr. Wadaran L. Kennedy 4.0 GPA Scholar Excellent Academic Performance Scholar
      CGPA: 4.00 out of 4.00
      Major: Nanoengineering
    • Master of Manufacturing Systems Engineering, (MEng)
      University: Universiti Putra Malaysia, Malaysia
      CGPA: 3.716 out of 4.00
      Major: Advance Manufacturing Systems
    • Bachelor's Degree of Mechanical Engineering, (BEng)
      University: Kolej Universiti Teknologi Tun Hussein Onn, Malaysia
      Award: Rector Award (Gold Medal)
      CGPA: 3.63 out of 4.00
      Major: Mechanical and Manufacturing Engineering
    • Diploma in Mechanical Engineering, (Dip)
      University: Politeknik Sultan Haji Ahmad Shah, Malaysia
      CGPA: 3.03 out of 4.00
      Major: Mechanical Engineering

     

Thesis

  • 1 Samykano, M. (2015). Physical and Mechanical Characterization of Electrodeposited Nickel Nanowiresâ€"Influence of Current Density and External Magnetic Field. North Carolina Agricultural and Technical State University.

    Book Chapter

  • 1 Leo B.F., Lah N.A.C., Samykano M., Pulingam T., Tang SS., Das Tuhi S. (2018) Disinfection. In: Das R. (eds) Carbon Nanotubes for Clean Water. Carbon Nanostructures. Springer, Cham
  • 2 Samykano, M., Mohan, R., & Aravamudhan, S. (2015). Effect of current density and magnetic field on the growth and morphology of nickel nanowires. In MEMS and Nanotechnology, Volume 8 (pp. 75-83). Springer, Cham. Journal (ISI Index â€" CIF: 52.92)
  • 1 Samykano, M., Selvamani, S. K., Kadirgama, K., Ngui, W. K., Kanagaraj, G., & Sudhakar, K. (2019). Mechanical property of FDM printed ABS: influence of printing parameters. The International Journal of Advanced Manufacturing Technology, 1-18. Springer â€" ISI Q2 (IF: 2.601)
  • 2 Anamalai, K., Samylingam, L., Kadirgama, K., Samykano, M., Najafi, G., Ramasamy, D., & Rahman, M. M. (2019). Multi-objective optimization on the machining parameters for bio-inspired nanocoolant. Journal of Thermal Analysis and Calorimetry, 135(2), 1533-1544. Springer â€" ISI Q2 (IF: 2.209)
  • 3 Awang, N. W., Ramasamy, D., Kadirgama, K., Samykano, M., Najafi, G., & Sidik, N. A. C. (2019). An experimental study on characterization and properties of nano lubricant containing Cellulose Nanocrystal (CNC). International Journal of Heat and Mass Transfer, 130, 1163-1169. Elsevier â€" ISI Q1 (IF: 3.891)
  • 4 Kumar, N. M., Sudhakar, K., & Samykano, M. (2019). Performance evaluation of CdTe BIPV roof and façades in tropical weather conditions. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 1-15. Taylor & Francis â€" ISI Q4 (IF: 0.55)
  • 5 Redhwan, A. A. M., Azmi, W. H., Sharif, M. Z., Mamat, R., Samykano, M., & Najafi, G. (2019). Performance improvement in mobile air conditioning system using Al 2 O 3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 135(2), 1299-1310. Springer â€" ISI Q2 (IF: 2.209)
  • 6 Sudhakar, K., Mamat, R., Samykano, M., Azmi, W. H., Ishak, W. F. W., & Yusaf, T. (2018). An overview of marine macroalgae as bioresource. Renewable and Sustainable Energy Reviews, 91, 165-179. Elsevier â€" ISI Q1 (IF: 9.184)
  • 7 Samylingam, L., Anamalai, K., Kadirgama, K., Samykano, M., Ramasamy, D., Noor, M. M., & Sidik, N. A. C. (2018). Thermal analysis of cellulose nanocrystal-ethylene glycol nanofluid coolant. International Journal of Heat and Mass Transfer, 127, 173-181. Elsevier â€" ISI Q1 (IF: 3.891)
  • 8 Ramachandran, K., Kadirgama, K., Awad, O. I., Ramasamy, D., Samykano, M., & Azmi, W. H. (2018). Comprehensive review of principle factors for thermal conductivity and dynamic viscosity enhancement in thermal transport applications: An analytical tool approach. International Communications in Heat and Mass Transfer, 98, 13-21. Elsevier â€" ISI Q1 (IF: 4.463)
  • 9 Zawawi, N. N. M., Azmi, W. H., Redhwan, A. A. M., Sharif, M. Z., & Samykano, M. (2018). Experimental investigation on thermo-physical properties of metal oxide composite nanolubricants. International Journal of Refrigeration, 89, 11-21. Elsevier â€" ISI Q1 (IF: 3.233)
  • 10 Kadirgama, K., Anamalai, K., Ramachandran, K., Ramasamy, D., Samykano, M., Kottasamy, A., & Rahman, M. M. (2018). Thermal analysis of SUS 304 stainless steel using ethylene glycol/nanocellulose-based nanofluid coolant. The International Journal of Advanced Manufacturing Technology, 97(5-8), 2061-2076. Springer â€" ISI Q2 (IF: 2.601)
  • 11 Redhwan, A. A. M., Azmi, W. H., Sharif, M. Z., Mamat, R., Samykano, M., & Najafi, G. Performance improvement in mobile air conditioning system using Al 2 O 3/PAG nanolubricant. Journal of Thermal Analysis and Calorimetry, 1-12. Springer â€" ISI Q2 (IF: 2.209)
  • 12 Kadirgama, K., Harun, W. S. W., Tarlochan, F., Samykano, M., Ramasamy, D., Azir, M. Z., & Mehboob, H. (2018). Statistical and optimize of lattice structures with selective laser melting (SLM) of Ti6AL4V material. The International Journal of Advanced Manufacturing Technology, 1-16. Springer â€" ISI Q2 (IF: 2.601)
  • 13 Lah, N. A. C., Johan, M. R., Samykano, M., & Saari, M. M. (2018). Truncated and spheroidal Ag nanoparticles: a matter of size transformation. Colloid and Polymer Science, 296(1), 121-131. Springer â€" ISI Q3 (IF: 1.967)
  • 14 Kumar, N. M., Sudhakar, K., & Samykano, M. (2018). Performance of thin-film BIPV as double sloped pitched roof in buildings of Malaysia. Energy Sources Part A: Recovery, Utilization, and Environmental Effects, 40(20), 2476-2484. Taylor & Francis â€" ISI Q4 (IF: 0.55)
  • 15 Sazali, N., Salleh, W.N.W., Ismail, A.F., Kadirgama, K., Moslan, M.S., Othman, F.E.C., Ismail, N.H., Samykano, M. and Harun, Z. (2018). Effect of heating rates on the microstructure and gas permeation properties of carbon membranes. Malaysian Journal of Fundamental and Applied Sciences, 14(3), 378-381. UTM â€" ISI
  • 16 Hamidi, M. F. F. A., Harun, W. S. W., Samykano, M., Ghani, S. A. C., Ghazalli, Z., Ahmad, F., & Sulong, A. B. (2017). A review of biocompatible metal injection moulding process parameters for biomedical applications. Materials Science and Engineering: C, 78, 1263-1276. Elsevier â€" ISI Q1 (IF: 5.08)
  • 17 Asri, R. I. M., Harun, W. S. W., Samykano, M., Lah, N. A. C., Ghani, S. A. C., Tarlochan, F., & Raza, M. R. (2017). Corrosion and surface modification on biocompatible metals: A review. Materials Science and Engineering: C, 77, 1261-1274. Elsevier â€" ISI Q1 (IF: 5.08)
  • 18 Lah, N. A. C., Samykano, M., Johan, M. R., Othman, N. S., Saari, M. M., Fen, L. B., & Khalil, N. Z. (2017). Plasmonic behaviour of phenylenediamine functionalised silver nanoparticles. Materials Research Express, 4(9), 095018. IOPSCIENCE â€" ISI Q4 (IF: 1.151)

    Journal (Scopus Index - CIF: 5.773)

  • 1 Kumar, N. M., Sudhakar, K., & Samykano, M. (2019). Performance comparison of BAPV and BIPV systems with c-Si, CIS and CdTe photovoltaic technologies under tropical weather conditions. Case Studies in Thermal Engineering, 13, 100374. Elsevier â€" Scopus Q1 (SJR IF: 0.991)
  • 2 Farhana, K., K. Kadirgama, M. M. Rahman, D. Ramasamy, M. M. Noor, G. Najafi, M. Samykano, and A. S. F. Mahamude. (2019). Improvement in the performance of solar collectors with nanofluidsâ€"A state-of-the-art review. Nano-Structures & Nano-Objects, 18, 100276. Elsevier â€" Scopus Q2 (SJR IF: 0.63)
  • 3 Sofiah, A. G. N., Samykano, M., Kadirgama, K., Mohan, R. V., & Lah, N. A. C. (2018). Metallic nanowires: Mechanical propertiesâ€"Theory and experiment. Applied Materials Today, 11, 320-337. Elsevier â€" Scopus Q1 (SJR IF: 2.802)
  • 4 Sangmesh, B., Gopalakrishna, K., Manjunath, S. H., Kathyayini, N., Kadirgama, K., Samykano, M., & Vijayakumar, G. C. (2018). Experimental investigation on HSFP using MWCNT based nanofluids for high power light emitting diodes. Journal of Mechanical Engineering and Sciences, 12(3), 3852-3865. UMP Press â€" Scopus Q2 (SJR IF: 0.45)
  • 5 Kumar, N. M., Sudhakar, K., Samykano, M., & Jayaseelan, V. (2018). On the technologies empowering drones for intelligent monitoring of solar photovoltaic power plants. Procedia computer science, 133, 585-593. Elsevier â€" Scopus (SJR IF: 0.26)
  • 6 Sazali, N., Salleh, W. N. W., Ismail, A. F., Kadirgama, K., Samykano, M., Najafi, G., & Mahyon, N. I. (2018). PI/NCC-Based Tubular Carbon Membrane: Influence of Aging Times Towards Oxygen Separation Performance. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51(2), 187-196. Akademia Baru - Scopus
  • 7 Ramachandran, K., Kadirgama, K., Ramasamy, D., Samykano, M., Samylingam, L., Tarlochan, F., & Najafi, G. (2018). Evaluation of Specific Heat Capacity and Density for Cellulose Nanocrystal-based Nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 51(2), 169-186. Akademia Baru - Scopus
  • 8 Kumar, N. M., Sudhakar, K., Samykano, M., & Sukumaran, S. (2018). Dust cleaning robots (DCR) for BIPV and BAPV solar power plants-A conceptual framework and research challenges. Procedia Computer Science, 133, 746-754. Elsevier â€" Scopus (SJR IF: 0.26)
  • 9 Manoj Kumar, N., Sudhakar, K., & Samykano, M. (2017). Techno-economic analysis of 1 MWp grid connected solar PV plant in Malaysia. International Journal of Ambient Energy, 1-10. Taylor & Francis â€" Scopus Q2 (SJR IF: 0.36)
  • 10 Sofiah, A. G., Samykano, M., Murillo, J. R., Lah, N. A., Ramasamy, D., Kadirgama, K., & Rahman, M. M. (2017). Effect of the Length on the Tensile Deformation of Nickel Nanowires Using Molecular Dynamics Simulations. Advanced Science Letters, 23(11), 11549-11552. ASP â€" Scopus Q4 (SJR IF: 0.13)
  • 11 Samykano, M., Mohan, R., & Aravamudhan, S. (2014). Morphology and Crystallographic Characterization of Nickel Nanowiresâ€"Influence of Magnetic Field and Current Density During Synthesis. Journal of Nanotechnology in Engineering and Medicine, 5(2), 021005. ASME â€" Scopus Q2 (SJR IF: 0.3)
  • 12 Mahendran, S., Fazli, I., & Thinesh Chander, S. (2011). Development of Micro EDM with Directly Mounted APA 400MML Actuator as Tool Feed Mechanism. In Advanced Materials Research, 314, 1811-1817. Trans Tech Publications - Scopus Q4 (SJR IF: 0.12)
  • 13 R. Devarajan, S. Mahendran, Z. A. A. Karim & T. Nagarajan. (2011). Design of Valveless Micropump using Preliminary Characteristics from Fluid Flow. Journal of Applied Sciences, 1, 1-4. Asian Network for Scientific Information â€" Scopus Q1 (SJR IF: 0.35)

    Proceedings (Scopus Index â€" CIF: 3.03)

  • 1 Subramaniam, S. R., Samykano, M., Selvamani, S. K., Ngui, W. K., Kadirgama, K., Sudhakar, K., & Idris, M. S. (2019, January). 3D printing: Overview of PLA progress. In AIP Conference Proceedings (Vol. 2059, No. 1, p. 020015). AIP Publishing - Scopus (SJR IF: 0.16)
  • 2 Subramaniam, S. R., Samykano, M., Selvamani, S. K., Ngui, W. K., Kadirgama, K., Sudhakar, K., & Idris, M. S. (2019, January). Preliminary investigations of polylactic acid (PLA) properties. In AIP Conference Proceedings (Vol. 2059, No. 1, p. 020038). AIP Publishing - Scopus (SJR IF: 0.16)
  • 3 Selvamani, S. K., Samykano, M., Subramaniam, S. R., Ngui, W. K., Kadirgama, K., Sudhakar, K., & Idris, M. S. (2019, January). 3D printing: Overview of ABS evolvement. In AIP Conference Proceedings (Vol. 2059, No. 1, p. 020041). AIP Publishing - Scopus (SJR IF: 0.16)
  • 4 Selvamani, S. K., Samykano, M., Subramaniam, S. R., Ngui, W. K., Kadirgama, K., Sudhakar, K., & Idris, M. S. (2019, January). Preliminary investigation of acrylonitrile butadiene styrene (ABS) properties. In AIP Conference Proceedings(Vol. 2059, No. 1, p. 020040). AIP Publishing - Scopus (SJR IF: 0.16)
  • 5 Santhi, U., Ngui, W. K., Samykano, M., Sudhakar, K., Kadirgama, K., & Sofiah, A. G. N. (2019, January). Magnetic nanowires (Ni) via chemical reduction method. In AIP Conference Proceedings (Vol. 2059, No. 1, p. 020008). AIP Publishing - Scopus (SJR IF: 0.16)
  • 6 Santhi, U., Ngui, W. K., Samykano, M., Sudhakar, K., Kadirgama, K., Sangmesh, B., & Kumar, M. A. R. (2019, January). Cobalt nanowires: Advancing into future nanomaterial. In AIP Conference Proceedings (Vol. 2059, No. 1, p. 020006). AIP Publishing - Scopus (SJR IF: 0.16)
  • 7 Benedict, F., Kadirgama, K., Ramasamy, D., Noor, M. M., Samykano, M., Rahman, M. M., & Sagmesh, B. (2019, January). Nanocellulose as heat transfer liquid in heat exchanger. In AIP Conference Proceedings (Vol. 2059, No. 1, p. 020044). AIP Publishing - Scopus (SJR IF: 0.16)
  • 8 Kananathan, J., Samykano, M., Sudhakar, K., Subramaniam, S. R., Selavamani, S. K., Kumar, N. M., & Harun, W. S. W. (2018, April). Nanofluid as coolant for grinding process: An overview. In IOP Conference Series: Materials Science and Engineering (Vol. 342, No. 1, p. 012078). IOP Publishing - Scopus (SJR IF: 0.2)
  • 9 Kumar, N. M., Sudhakar, K., & Samykano, M. (2018, April). Estimation of solar collector area for water heating in buildings of Malaysia. In IOP Conference Series: Materials Science and Engineering (Vol. 342, No. 1, p. 012039). IOP Publishing - Scopus (SJR IF: 0.2)
  • 10 Yusop, H. M., Ghazali, M. F., Yusof, M. F. M., Remli, M. P., & Samykano, M. (2018). Fault Identification in Pipeline System Using Normalized Hilbert Huang Transform and Automatic Selection of Intrinsic Mode Function. In MATEC Web of Conferences (Vol. 221, p. 02002). EDP Sciences - Scopus (SJR IF: 0.15)
  • 11 Sudhakar, K., & Samykano, M. (2018, February). Performance of Utility Scale PV Plant in Malaysia and India: A Comparative Study. In 2018 4th International Conference on Electrical Energy Systems (ICEES) (pp. 106-110). IEEE. ICEES 2018 - Scopus (SJR IF: 0.12)
  • 12 Kumar, N. M., Sudhakar, K., Samykano, M., & Hyder, F. (2018, February). BIPV Power Plants and Policy recommendatons. In 2018 4th International Conference on Electrical Energy Systems (ICEES) (pp. 652-655). IEEE. ICEES 2018 - Scopus (SJR IF: 0.12)
  • 13 Sudhakar, K., Samykano, M., & Jayaseelan, V. (2018, February). BIPV Market Growth: SWOT Analysis and Favorable Factors. In 2018 4th International Conference on Electrical Energy Systems (ICEES) (pp. 412-415). IEEE. ICEES 2018 - Scopus (SJR IF: 0.12)
  • 14 Kananathan, J., Sofiah, A. G. N., Samykano, M., Ulakanathan, S., Lah, N. A. C., Harun, W. S. W., & Siregar, J. P. (2017, October). Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires. In IOP Conference Series: Materials Science and Engineering (Vol. 257, No. 1, p. 012033). IOP Publishing - Scopus (SJR IF: 0.2)
  • 15 Sofiah, A. G. N., Kananathan, J., Samykano, M., Ulakanathan, S., Lah, N. A. C., Harun, W. S. W., & Siregar, J. P. (2017, October). Electrochemical deposited nickel nanowires: influence of deposition bath temperature on the morphology and physical properties. In IOP Conference Series: Materials Science and Engineering (Vol. 257, No. 1, p. 012032). IOP Publishing - Scopus (SJR IF: 0.2)
  • 16 Hamdan, M. H. M., Siregar, J. P., Bachtiar, D., Rejab, M. R. M., Samykano, M., Agung, E. H., & Jaafar, J. (2017, October). Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. In IOP Conference Series: Materials Science and Engineering (Vol. 257, No. 1, p. 012044). IOP Publishing. IOP Publishing - Scopus (SJR IF: 0.2)
  • 17 Suhaimi, N. S., Saari, M. M., Mohamed, A. I., Lah, N. A. C., & Samykano, M. (2017, August). Development of a compact and sensitive AC magnetometer for evaluation of magnetic nanoparticles solution. In Control and System Graduate Research Colloquium (ICSGRC), 2017 IEEE 8th (pp. 221-224). IEEE. ICSGRC - Scopus
  • 18 Hwa, K. C., Ramasamy, D., Kadirgama, K., Noor, M. M., Rahman, M. M., & Samykano, M. (2017). Methods of preparing internal combustion engine cylinder bore surfaces for frictional improvement. In MATEC Web of Conferences (Vol. 90, p. 01055). EDP Sciences - Scopus (SJR IF: 0.15)
  • 19 Mahendran, S., Devarajan, R., Nagarajan, T., & Majdi, A. (2010, March). A review of micro-EDM. In Proceedings of the International MultiConference of Engineers and Computer Scientists 2010 Vol II, IMECS 2010 (Vol. 2181, pp. 999-1003). IMECS 2010 - Scopus
  • 20 Mahendran, S., & Zamri, M. (2010). Design Optimization of Air Intake System (AIS) of 1.6 L Engine by Adding Guide Vane. In Proceedings of the International MultiConference of Engineers and Computer Scientists 2010 Vol II, IMECS 2010 (Vol. 2181, pp. 999-1003). IMECS 2010 - Scopus
  • 21 Devarajan, R., Mahendran, S., Karim, Z. A. A., & Nagarajan, T. (2010). Design of valve less micropump using preliminary characteristics from fluid flow. In Proceedings of The International MultiConference of Engineers and Computer Scientists (Vol. 2010, pp. 1589-1592). IMECS 2010 - Scopus

Journal & Proceeding (Non-Index)

  • 1 Lah, N. A. C., Samykano, M., & Trigueros, S. (2016). Nanoscale metal particles as nanocarriers in targeted drug delivery system. J Nanomed Res, 4(2), 00086.
  • 2 Samykano, M., Mohan, R., & Aravamudhan, S. (2015). Structure and Morphology of Electrodeposited Nickel Nanowires at an Electrode Distance of 20mm. Structure, 1, 23704.
  • 3 Mahendran, S., & Ramasamy, D. (2010, May). Micro-EDM: overview and recent developments. In National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) (pp. 26-27).
  • 4 Ramasamy, D., Mahendran, S., Mohamed, Z., & Bakar, R. A. (2010, May). Evaluation of a Two Stroke Compressed Natural Gas Mixer Design by Simulation and Experimental Techniques. In National Conference in Mechanical Engineering Research and Postgraduate Students (1st NCMER 2010) (pp. 26-27).
  • 5 Ramasamy, D., Samykano, M., & Kadirgama, K. (2010, May). Design of compressed natural gas mixer using computational fluid dynamics. In Proceedings of the National Conference in Mechanical Engineering Research and Postgraduate Students, UMP, Kuantan, Pahang, Malaysia (pp. 26-27).

Project Report

  • 1 Mahendran, S., MM, N., Lee, G. C., & Mohd Fazli, I. (2011). Investigation of micromachining of silicon using micro-EDM - penyelidikan dalam pemesinan mikro bagi silicon menggunakan EDM mikro (RDU0903131 Final Report, Universiti Malaysia Pahang).
  • 2 Mahendran, S., MM, R., Muhamad, M. N., Sharuzi, W., Harun, W., & Rusli, G. (2011). Development of micro-EDM with microactuator feed control system - membangunkan EDM mikro menggunakan aktuator mikro sebagai sistem penyuapan pemotongan (RDU090367 Final Report, Universiti Malaysia Pahang).
  • 3 Mahendran, S., Lee, G. C., MM, N., & Mahdhir, M. Y. (2010). Development of micropump in fuel cell application using micro electro-mechanical system (MEMS) machining method - membangunkan pam mikro untuk penggunaan sel bahan api menggunakan sistem mikro elektro-mechanical (MEMS) (RDU090366 Final Report, Universiti Malaysia Pahang).

International Awards

1. Title: Platinum Award & Gold Medal
Awarding Body: British Invention Show (BIS2018), Barbican, London, UK
Year: 2018

National Awards

1. Title: Gold Medal (GEC: Nanocrystal Engine Coolant)
Awarding Body: International Invention and Innovation Exhibition (ITEX)
Year: 2018

2. Title: Gold Medal (Cellulose Nanocrystal as Novel Green Engine Coolant (GEC))
Awarding Body: Creation, Innovation, Technology and Research Exposition (CITREX)
Year: 2018

3. Title: Gold Medal (Design and Fabrication of Planetary Motion Ball Mill System for Mild Steel Nano/Micro Particles Formation – Waste to Wealth)
Awarding Body: Advanced Innovation on Engineering Innovation (AINEX)
Year: 2017

4. Title: Silver Medal (Design and Development of Horizontal Ball Mill for Mild Steel Nano/Micro Particles Formation
Awarding Body: Creation, Innovation, Technology and Research Exposition (CITREX)
Year: 2017

5. Title: Gold Medal (Design and Fabrication of Planetary Motion Ball Mill System for Mild Steel Nano/Micro Particles Formation – Waste to Wealth)
Awarding Body: Creation, Innovation, Technology and Research Exposition (CITREX)
Year: 2017

6. Title: Gold Medal (Dissimilar Cam Profile for Air Flow Improvement in a CNG Engine)
Awarding Body: Creation, Innovation, Technology and Research Exposition (CITREX)
Year: 2017

7. Title: Gold Medal (Dissimilar Cam Profile for CNG Engine)
Awarding Body: International Invention and Innovation Exhibition (ITEX)
Year: 2016

Administrative Experience

1. Position: Head of Program
Organization: College of Engineering, Universiti Malaysia Pahang
Date: 1st August 2019 - Present

2. Position: Professional Teaching Academician for Bachelor's Degree of Automotive Engineering
Organization: FKM, Universiti Malaysia Pahang
Date: 2nd Jan 2018- 31st Dec 2020

3. Position: Auditor
Organization: UMP
Date: 2nd Jan 2018 – 31st Dec 2018

4. Position: FYP Coordinator
Organization: FKM, UMP
Date: 4th Feb 2016 – 31st Dec 2016

5. Position: Academic Coordinator
Organization: FKM, UMP
Date: 9th April 2009 -8th April 2010

6. Position: Examination Coordinator
Organization: FKM, UMP
Date: 1st Sept 2008 – 31st Aug 2009

7. Position: Emergency Response Team (ERT) Member
Organization: FKM, UMP
Date: 1st March 2011 – 29th Feb 2012

8. Position: MS ISO/IEC 17025 Committee Member
Organization: FKM, UMP
Date: 1st Oct 2010 – 30th Oct 2011

9. Position: Marin Programme Documentation Committee Member
Organization: FKM, UMP
Date: 29th Nov 2010 – 29th Nov 2011

10. Position: Quality Management System (QMS) Committee Member
Organization: FKM, UMP
Date: 01st Dec 2009 – 30th Nov 2010

11. Position: MS ISO 9001:2000 Task Force Head
Organization: FKM, UMP
Date: 03rd Feb 2009 – 03rd Feb 2010

Keynote Speaker

1. Programme: Keynote Speaker on Publishing in High Impact Journals
Organization: Bannari Amman Institute of Technology, India
Year: 2018

2. Programme: Keynote speaker at International Seminar on Recent Trends in Mechanical Engineering
Organization: Sasurie College of Engineering, India
Year: 2018

Invited/Guest Speaker

1. Programme: Invited speaker at International Workshop on Educationand Research Opportunities at Universiti Malaysia Pahang (UMP)
Organization: Sathyabama Institute of Science and Technology, India
Year: 2018

2. Programme: Speaker at Nanotechnology Talk Session
Organization: DRB Hicom University
Year: 2017

3. Programme: Invited Talk on Nanotechnology Research at Universiti Malaysia Pahang
Organization: Universiti Malaya
Year: 2017

Academic Recognition

4. Programme: Speaker at Research Seminar at Department of Mechanical and Materials Engineering
Organization: Universiti Kebangsaan Malaysia
Year: 2016

Evaluator/Judge

1. Programme: Internal Evaluator, MAPIM Award and National Book Award
Organization: Universiti Malaysia Pahang
Year: 2019

2. Programme: Judge, Creation, Innovation, Technology & Research Exposition (CITREx, 2017)
Organization: Research and Innovation Department, UMP
Year: 2017

3. Programme: Judge, Integrated Design Project Exhibition & Competition (IDPEC)
Organization: FKM, Universiti Malaysia Pahang
Year: 2016

4. Programme: Judge, Integrated Design Project Exhibition & Competition (IDPEC)
Organization: FKM, Universiti Malaysia Pahang
Year: 2015

Journal Reviewer

1. International Journal of Advanced Manufacturing Technology, ISI Q2, IF: 2.601

2. Results in Physics, ISI Q2. IF: 2.147

3. Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISI Q3, IF: 1.627

4. International Journal of Automotive and Mechanical Engineers, SCOPUS Q2, SJR IF: 0.576

5. Journal of Mechanical Engineering and Sciences, SCOPUS Q2, SJR IF: 0.454

6. International Conference on Mechanical Engineering Research (ICMER, 2017)

7. Technology and Innovation National Conference, 2016

International and National Committee

International

1. Advisory Committee, International Conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN, 2019), March 8-9, 2019, Jaipur, India. (https://icamen2019.co.in/advisory-committee)

2. Session Chair, Advanced Nanomaterials (ANM, 2018), July 17-19, 2018, Aveiro, Portugal. (https://www.advanced-nanomaterials-conference.com)

3. International Program Committees, 2nd International Conference on Mechanical Engineering and Applied Composite Materials (MEACM, 2018), Dec 7-8, 2018, Harbin, China. (http://www.meacm.org/committees.html)

4. International Advisory Committee, Second World Congress on Microscopy:
Instrumentation, Techniques and Applications in Life Sciences and Materials Sciences (WCM, 2018), August 10-12, 2018. Kerala, India. (http://www.microscopy.macromol.in/committee.html)

5. Advisory Committee, 2nd International Symposium on Micro-Machining & Machinability (ISMMM, 2018), May 26, 2018. Jaipur, India. (https://apply.smude.edu.in/content/dam/manipal/muj/documents/2nd%20International%20Symposium-%20ISMMM%202018.pdf)

6. International Program Committees, International Conference on Mechanical Engineering and Applied Composite Materials (MEACM, 2017), Nov 21-24, 2017, Hong Kong. (https://easychair.org/cfp/meacm17)

7. International Technical Committees, The 2nd International Conference on Materials Engineering and Nanotechnology (ICMEN, 2016), May 21-23, 2016, Taipei, Taiwan. (https://www.scientific.net/KEM.709.-5.pdf)

National

1. Program Committee, 4th International Conference on Mechanical Engineering Research (ICMER, 2017), August 1-2, 2017, Kuantan, Pahang.

2. Session Chair, 4th International Conference on Mechanical Engineering Research (ICMER, 2015), August 18-19, 2015, Kuantan, Pahang.

Memorandum of Understandings (MOU) Initiated

1. Organization: North Carolina A&T State University and The University of North Carolina at Greensboro, USA
Year: 2018

Intelectual Property Award (IP)

1. Title: Coolant
Application Number: PI 2018703715
Date: 08 October 2018

Research Grant

International (Total: RM 130,502.40)

1. Title: Direct Metal Laser Sintering Technology for the Manufacture of Fully Porous Functionally Graded Titanium Allow Femoral Stems (Qatar National Research Fund)
Responsibility: Project Member
Amount: RM 130,502.40
Grant No.: UIC161504

National (Total: RM 341,700.00)

1. Title: Synthesis and Characterization of One-Dimensional Modified Cobalt Nanowires for Nanoscale Mechanical Devices
Responsibility: Project Leader
Amount: RM 68,800.00
Grant No.: RDU160119

2. Title: A Study on Data-Driven Approach for Rotating Machinery Fault Diagnosis using Machine Learning Technique
Responsibility: Project Member
Amount: RM91,500.00
Grant No.: RDU190157

3. Title: Fundamental Study of Nano-Diesel Blend Fuels in Ultra-low Emission Homogeneous Charge Compression Ignition Engine
Responsibility
: Project Member
Amount: RM98,200.00
Grant No.: RDU160152

4. Title: Fundamental Study of Hybrid Graphene Oxide and Nanofibrilled Cellulose for Aircraft Wings Applications
Responsibility: Project Member
Amount: RM83,200.00
Grant No.: RDU170125

Industry (Total: RM 90,000.00)

1. Title: Optimizing 3d Printing Parameters for Improved Mechanical Behaviour of PLA Using Fused Deposition Modeling (FDM)
Responsibility: Project Leader
Amount: RM 30,000.00
Grant No.: RDU192403

2. Title: Investigation of Mechanical Properties of Hybrid Poly Lactic Acid-Metal 3D Printed Parts Using Fused Deposition Modelling
Responsibility: Project Member
Amount: RM 30,000.00
Grant No.: RDU192401

3. Title: Investigation of Effects of 3D Printing Parameters on Mechanical Properties of ABS Material Prepared Using FDM
Responsibility: Project Member
Amount: RM 30,000.00
Grant No.: RDU192402

University (Total: RM 531,231.00)

1. Title: Experimental Studies on the Effect of Current Density and Magnetic Field on the Growth of Ni Nanowires During Electrodeposition
Responsibility: Project Leader
Amount: RM 36,500.00
Grant No.: RDU1803176

2. Title: Ethylene Glycol/Nanocellulose based Nanofluid Coolant for Machining Nickel Alloy
Responsibility: Project Member
Amount: RM31,131.00
Grant No.: RDU1803136

3. Title: Investigation of the Influence of Synthesis Parameter on Template based Electrodeposited Cobalt Nanowires
Responsibility: Project Member
Amount: RM 38,500.00
Grant No.: RDU180328

4. Title: Robust Supply Chain Risk Management Models to Optimize Total Supply Chain Cost in An Uncertain Environment Through Soft Computing
Responsibility: Project Member
Amount: RM31,400.00
Grant No.: RDU180374

5. Title: Effect Of Solution Concentration And Temperature On The Growth Of Ferromagnetic Nanowires During Electrodeposition
Responsibility: Project Leader
Amount: RM 38,700.00
Grant No.: RDU170320

6. Title: Performance Analysis of Floating and Submerged Photovoltaic Systems
Responsibility: Project Member
Amount: RM33,500.00
Grant No.: RDU1803100

7. Title: Characterization and Technology Assessment of Sustainable Biofuel Production from Seaweed for Automotive Application
Responsibility: Project Member
Amount: RM26,000.00
Grant No.: RDU1703147

8. Title: Development of Nickel-Based Nanopolymer for Automotive Dashboard
Responsibility: Project Member
Amount: RM24,500.00
Grant No.: RDU1703150

9. Title: Synthesis of Silver Nanowires Hybrid Thin Film For Advanced Automotive Application
Responsibility: Project Member
Amount: RM26,000.00
Grant No.: RDU1703152

10. Title: Graphene Nanoplatelets for Epoxy Composites in Automotive Applications
Responsibility: Project Member
Amount: RM 21,000.00
Grant No.: RDU1703321

11. Title: Investigation of the influence of synthesis parameter on template based electrodeposited Ni nanowires
Responsibility: Project Leader
Amount: RM 39,500.00
Grant No.: RDU160337

12. Title: Investigate the Effect of Nanolubricant for Enhancing the Vehicle Air-Conditioning Efficiency
Responsibility: Project Member
Amount: RM25,500.00
Grant No.: RDU160306

13. Title: One Dimensional Nanomaterial Synthesis, Characterization and Potential Industrial Application
Responsibility: Project Leader
Amount: RM 5,500.00
Grant No.: RDU151116

14. Title: Design and Fabrication of Solar Car Body and Chassis
Responsibility: Project Member
Amount: RM36,000.00

15. Title: Development of Micro-EDM with Microactuator Feed Control System
Responsibility: Project Leader
Grant No.: RDU100362
Amount: RM 40,000.00
Grant No.: RDU090367

16. Title: Development of Micropump in Fuel Cell Application Using Micro Electro-Mechanical Systems (MEMS) Machining Method
Responsibility: Project Member
Amount: RM37,500.00
Grant No.: RDU090366

17. Title: Investigating of Micromachining of silicon Using Micro EDM
Responsibility: Project Leader
Amount: RM 40,000.00
Grant No.: RDU0903131

18. Title: A Novel and Flexible Solar Car Kit for Educational Use
Responsibility: Project Member
Amount: RM0.00
Grant No.: RDU090201

Corporate Social Resposibilities

1. Position: Committee Member
Programme: UMP Engineering Day
Organization: FKM, Universiti Malaysia Pahang
Year: 2018

2. Position: Mock Interview Panel
Programme: Bootcamp UMP
Organization: Universiti Malaysia Pahang
Year: 2016

3. Position: Facilitator
Programme: Community of Graduate Scholar Programme
Organization: North Carolina A&T State University, USA
Year: 2011

4. Position: Facilitator
Programme: Grooming for Interview Workshop for UMP Graduating Students
Organization: Universiti Malaysia Pahang
Year: 2011

5. Position: Trainer
Programme: Grooming for Interview Workshop
Organization: Universiti Malaysia Pahang
Year: 2009

Referees

1. Name: Dr. Ram V. Mohan
Position: Professor
Affiliation: Department of Nanoengineering, Joint School of Nanoscience & Nanoengineering, North Carolina A&T State University
Contact No.: (Office): +1 (336) 285-2867; (Mobile): +1 (336) 337-5974
Email: rvmohan@ncat.edu

2. Name: Dr. Rizalman Mamat
Position: Professor
Affiliation: Faculty of Mechanical and Manufacturing Engineering
Contact No.: (Office) +609-4246275; (Mobile): +6013-9290709
Email: rizalman@ump.edu.my

3. Name: Dr. T. Prakash G. Thamburaja
Position: Professor
Affiliation: Department of Mechanical and Materials Engineering, National University of Malaysia
Contact No.: (Office) +603-8911 8375; (Mobile): +6012-7172479
Email: p.thamburaja@ukm.edu.my