(A) Journal

• 1 Shukla M., and Sharma K., Measurement of dispersion and homogeneity of functionalized graphene/CNT hybrid epoxy composite, SN Applied Sciences, 1(9),1011-14 (2019) WoS.
• 2 Mausam K., Sharma K., Bhardwaj G and Singh RP, Multi-objective optimization design of Die sinking electric discharge machine (EDM) machining parameter for CNT reinforced carbon fiber nano composite using gray relational analysis, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41(8), 348-356 (2019) (SCI IF-1.7).
• 3 Singh RP., Sharma K., and Tiwari AK., An experimental investigation of thermal conductivity of TiO2 nanofluid: proposing a new correlation Molecular, Journal of Scientific and industr ial research, 78 (09), 620-623 (2019) (SCI IF-0.78).
• 4 Shukla M., and Sharma K., Review of Mechanical Properties and Characterization of Epoxy based Composites. Polymer Science Series A, 61(4), 429-460 (2019) (SCI IF-0.72).
• 5 Shukla M. and Sharma K., Effect of functionalized graphene/CNT ratio on the synergetic enhancement of mechanical and thermal properties of epoxy hybrid composite Material Research SCI IF-1.45).
• 6 Shukla M. and Sharma K., Microstructure and Elemental Investigation of Graphene/ CNT Epoxy Composite. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(4), 108-111 (2019), Scopus. D2657028419/19©BEIESP.
• 7 Gupta M. and Sharma K., Experimental Observation of Heat Exchange And Pressure Drop By using Many Inserts in A Round Tube, International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(4), 124-1307 (2019), Scopus. D2660028419/19©BEIESP.
• 8 Shukla M. and Sharma K., Enhanced Dispersion and Tensile Properties of Graphene/CNT Epoxy Composites by Varying the Filler Ratio. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(4), 103-107 (2019), Scopus. D2656028419/19©BEIESP.
• 9 Singh P., Sharma K. and Singh P., Effect of filler materials with different cross sections on the performance of di-electric polymer actuators, International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(5), 2698-2705 (2019), Scopus.
• 10 Kumar A., Sharma K. and Dixit A., a Review of the Mechanical and Thermal properities of Graphene and its hybrid polymer Nanocomposites for Structural applications. Journal of material Science, 44 (8), 5992-6026. (SCI IF-3.44) https://doi.org/10.1007/s10853-018- 03244-3.
• 11 Singh P. and Sharma K., Molecular Dynamics Simulation of Glass Transition Behavior of Polymer based Nanocomposites, Journal of Scientific and industrial research, 77 (2018), 592-595 (SCI IF-0.78)
• 12 Singh P. and Sharma K., Mechanical and Visco-elastic Properties of In-situ Amine Functionalized Multiple Layer Graphene/Epoxy Nanocomposites, Current Nanoscience, 14 (2018), 252-262 (SCI IF-1.58), doi: 10.2174/1573413714666171220144549.
• 13 Yadav. A., Kumar A., Singh P.K, Sharma K., Glass transition temperature of functionalized graphene epoxy composites using molecular dynamics simulation, Integrated Ferroelectrics, 186 (2017), 106-114 (SCI IF-0.75) doi: org/10.1080/10584587.2017.1370331.
• 14 Singh P.K, Sharma K., Kumar A., Shukla M. Effects of functionalization on the mechanical properties of multi-walled carbon nanotubes: A Molecular approach, Journal of composite materials, 51(5) (2016) 671-680 (SCI IF-1.613) doi: 10.1177/0021998316649781.
• 15 Tyagi S., Dwivedi V.K., Sharma K. Evaluation of mechanical properties of single walled carbon nanotube/HDPE-P5300 composites using molecular dynamics, Advanced Mater ials Manufacturing and Characterization, 6(1) (2016) 58-64.
• 16 Sharma K., Kaushalayan K.S, Shukla M. Pull-out simulations of interfacial Properties of amine functionalized multi-walled epoxy composites. Computational materials science, 99(2015) 232-241. (SCI IF-2.664) doi.org/10.1016/j.commatsci.2014.12.023.
• 17 Sharma K., Shukla M. Processing, characterization and modeling of amine Functionalized carbon nanotubes incorporated carbon fiber/epoxy Composites. Journal of nanomaterials (2014) 1-10. (SCI IF-1.74) doi.org/10.1155/2014/837492.
• 18 Sharma K., Shukla M. Molecular modeling of mechanical behavior of amine Functionalized multiwalled carbon fiber epoxy composites. New Carbon Materials 29 (2), (2014) 132 -142. (SCI IF-1.12) doi: 10.1016/S1872-5805(14)60131-1.
• 19 Sharma P., Sonia P., Sharma K.,Mausam K. Dynamic Mechanical Properties Composite Reinforced with Alumina Nanorods. Advance Science Letters 21 (9) (2015) 2833 -2835. (SCOPUS) https://doi.org/10.1166/asl.2015.6369.
• 20 Sharma K., Kaushalyan K.S. Effect of Amino Functionalized Carbon Nanotubes on Thermal Mechanical Properties of Multi-Walled Carbon Nanotube/Epoxy Composite. Advance Science Letters 21(9) (2015) 2790-2793. (SCOPUS) doi.org/10.1166/asl.2015.6373.
• 21 Sharma P., Tiwari M., Sharma K. Design and analysis of a process plant piping system. International Journal of Current Engineering and Technology (2014) 31 -39. Available at http://inpressco.com/category/ijcet.
• 22 Mausam K., Tiwari M., Sharma K., Singh RP. Process parameter optimization for maximum material removal rate in high speed elctro-discharge machining. International Journal of Current Engineering and Technology, 3(3) (2014) 239 -214. Available at http://inpressco.com/category/ijcet.
• 23 Tiwari M., Mausam K., Sharma K., Singh RP. Experimental Analysis of Electro-Discharge Machining Parameters for Minimum Tool Wear Rate on Machinability of Carbon Fiber/Ep oxy Composites Using Taguchi Method, International Journal of Engineering Research & Technology (IJERT) 2(10) (2013) 3182-3188. (SCOPUS) www.ijert.org/view-pdf /5972.
• 24 Tiwari M., Mausam K., Sharma K., Singh RP. Molecular dynamics simulation study of novel properties of defect full single walled carbon nanotubes, International Journal of Application or Innovation in Engineering & Management 2(2) (2013) 77 -81. https://www.scribd.com/document/131437831.
• 25 Saxena K.K, Srivastava V., Sharma K. Calculation of fundamental Mechanical Properties of Single-walled Carbon Nanotube Using Non-local elastic. Advanced Materials Research 383(390) (2012) 3840-3844. (SCOPUS) doi10.4028/www.scientif ic.net/AMR.383-390.3840.
• 26 Sharma K., Shukla M. Experimental study of Mechanical properties of Multi-scale Carbon fiber-epoxy-CNT-composites. Advanced Materials Research 383(390) (2012 ) 2723-2727. (SCOPUS) doi:10.4028/www.scientif ic.net/AMR.383-390.2723.

(B) International Conferences

• 1 Yadav A., Kumar A., Sharma K, Shukla MK, “Investigating the Effects of Amine Functionalized Graphene on the Mechanical Properties of Epoxy Nanocomposites” Materials Today Proceedings, 11, 837-842, 2019. (SCOPUS).
• 2 Shukla MK., Kumar A., Yadav A., Sharma K., “Improved Mechanical Properties of Graphene Oxide Reinforced Cross-linked Epoxy Nanocomposites: A Molecular Dynamics Approach” Materials Today Proceedings, 11, 679-685, 2019. (SCOPUS).
• 3 Mausam K., Sharma K., and Singh RP, “ Selection of suitable process p arameters for die sinking EDM using GRA for CNT 10 layered Carbon fiber nanocomposites” International conference on emerging trends in Engineering Innovations Technology and Management (ICET-EITM-2017), NIT Hamirpur, 16-18 Dec-2017, pp-192-195. ISBN:9789386724311.
• 4 Mausam K., and Sharma K., “Comparative experimental investigation of properties of KEVLAR composites and E-Glass reinforced Kevlar fiber hybrid composite for making component of wing box in Aerospace industry” 41st National conference, Dayalbagh Educational Institute, Agra, Dec. 1-2, 2017, ISBN:978-14673-00.
• 5 Soina P., Sharma K., “Tensile behaviour of hybrid polymer nano -composite reinforced by Al2O3 rod and spherical shape nano particles” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 594-597, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93- 86238-39-9, Publisher: Excellent Publishing House.
• 6 Kumar A., Sharma K., Singh P. K., Dwivedi. V. K. Mechanical characterization of vacancy defective single-walled carbon nanotube epoxy/composites. Materials Today Proceedings, 4(2) 4013-4021, 2017. (SCOPUS) https://doi.org/10.1016/j.matpr.2017.02.303
• 7 Mausam K, Singh R.P., Sharma K., Investigation of Optimum Process Parameter for Minimum Tool Wear in EDM Process, International Conference on Frontiers in Engineering, Applied Sciences & Technology, NIT, Trichy, pp: 115-119, 2017. BEST PAPER AWARD
• 8 Kukreja N., Alam M., Nirankari D., Sharma K., Numerically Comparing Simple and Shchelkin Spirals Type of Tubes of a Pulse Detonation Engine, National Conference on Recent Advances in Mechanical Engineering NIT, Kurukshetra, pp- 85-89, 2017.
• 9 Sonia P., Singh P.K., Sharma K., Tensile Behavior of Hybrid Polymer Nanocomposite Reinforced by Al2O3 Rod and Spherical Shape Nano Particles, NIT, Durgapur, Materials Today Proceedings, paper No: 44, 2017. (SCOPUS)
• 10 Mausam K., Singh R.P., Sharma K., Annirudh, Development of Genetic Algorithm (GA) Model for optimization of Tool Wear Rate (TWR) for 6 Layered Carbon Fiber based Epoxy composites, IVth International Conference on Production and Industrial Engineering, CPIE - 2016, Dr. B. R. Ambedkar NIT Jalandhar, Paper no. 138, 2016.
• 11 Mausam K., Singh P.K., Sharma K., Gupta R.C., Investigation of process parameter of EDM using genetic algorithm (GA) approach for carbon fiber based two phase epoxy composites, International Conference on Recent Advances in Nano Science and Technology -, Material Today Proceeding. 2016 (Scoupus). https://doi.org/10.1016/j.matpr.2016.11.081
• 12 Kumar A., Sharma K., Singh P.K., Ashraf J., Effect of different vacancy patterns on mechanical properties of single – walled carbon nanotubes using molecular dynamics, International conference on Computational Condensed Matter Physics and Material Science, 2015.
• 13 Mausam K., Sharma K., Gupta R.C., Taliwal M., Investigation of optimum parameter of electro-discharge machining for two phase carbon fiber composites using taguchi method, Tronida India, ISSN(PRINT):2394-6202,(ONLINE):2394-6210,Vol (1), pp-15-18, 2015.
• 14 Tiwari M., Mausam K., Sharma K., Singh R.P., Investigate the Optimal Combination of Process Parameters by Using a Grey Relational Analysis. Procedia Engineering vol5, pp1736-1744, 2014. (Scoupus) https://doi.org/10.1016/j.mspro.2014.07.363
• 15 Tiwari M., Mausam K., Sharma K., Process Parameter Optimization of a High Speed Electro-Discharge Machining using a Taguchi Fuzzy-Based Approach, International Conference on Mechanical Engineering: Emerging Trends for Sustainability, 29 -31 January, organized by MANIT, Bhopal. 2014.
• 16 Kaushalyayan K.S., Tiwari M., Kumar D., Sharma K., Dwivedi V.K., Pathak D.K., Investigation of Process Parameters for EDM of Carbon Fiber Epoxy Composites using TOPSIS, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 163 -169, ISSN 1941-9414, 2014.
• 17 Mausam K., Sharma K., Study of Mechanical Properties of Carbon Nanotubes with Synthesis and Production Methods - A Review, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, , paper id. 153, 2013.
• 18 Sharma K., Shukla M., Molecular dynamics simulation of the effect of amine functionalization on the elastic properties of single, double & triple walled carbon nanotubes, Eighth South African Conference on Computational and Applied Mechanics (SACAM -2012), Johannesburg, South Africa, 2012 (SCOPUS).
• 19 Sharma K., Saxena K., Shukla M., Effect of number of Stone-Wales and vacancy defects on the mechanical behavior of carbon nanotube using molecular dynamics, Procedia Engineering,38, 3373-3380, 2012 (Scopus). https://doi.org/10.1016/j.proeng.2012.06.390
• 20 Sharma K., Shukla M., Micro-mechanics modeling and experimental study of Mechanical properties of Multi-scale Carbon-fiber-epoxy-CNT-composites. International conference on Applied Mechanics and Materials Conference: Chicago, Illinois, 2011 (ASME-2011).
• 21 Sharma K., Shukla M., Molecular dynamics evaluation of mechanical properties of carbon nanotubes with number of Stone-Wales defects. International conference on Nano Science, Engineering and Technology (ICONSET 2011), IEEE Explore (Scopus). pp 305-310, 2011. DOI:10.1109/ICONSET.2011.6167932.
• 22 Sharma K., Shukla M., Saxena K., Molecular Dynamics study of Mechanical Properties of Carbon-Nanotube reinforced LY556 composites. International conference on Nan o-science and Technology, Singapore (Conference proceedings will be published by ASME, and paper will be included in ASME digital library (Scopus), and Indexed by EI compendex, Thomson ISI proceedings). pp470-474, 2011. DOI:10.1115/1.859841.paper77.
• 23 Sharma K., Shukla M., Saxena K., Calculation of Elastic properties of PMMA/CNT using molecular Dynamics Study, International conference on Nano -science and Technology, Singapore (Conference proceedings will be published by ASME and paper will be included in ASME digital library (Scopus), and indexed by EI compendex, Thomson ISI proceedings). pp 475-480, 2011. DOI: 10.1115/1.859841.paper76.
• 24 Sharma K., Mausam K., Vimal J., Srivastva S., CNT:-Strength behind composites: A Review. National conference on emerging Vistas of Mechanical Engineering in 21st centur y, Anand Engineering College, 4-5 April 2011 (Published by NAROSA).
• 25 Mausam K., Sharma K., Arif M., Agrawal A., Future backbone of Development: GREEN Engineering and Technology. National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4 -5 April, 2011 (Published by NAROSA)
• 26 Reddy D.M., Sharma K., Shukla M., Effect of Amine functionalized Multi-walled Carbon Nanotubes on the mechanical properties of Carbon Fiber/Epoxy composites. International Conference on Synthesis, Characterization, Consolidation and modeling of nano materials: PSG Coimbatore, INDIA, March 05-06, pp-222-227, 2010.
• 27 Sharma K., Shukla M., Reddy D.M., Fabrication, Characterization and modeling of Amine Functionalized carbon nanotubes Carbon/fiber epoxy composites. International Conference on NANO-Technology- Materials and composites for Frontier Applications. Bhartiya Vidyapeeth University, Pune-India, October 14-15, pp53-54, 2010.
• 28 Saxena K., Sharma K., Evaluation of Poisson’s Ratio of Carbon Nanotubes (CNT) in different directions, National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20 and 21, Paper No.37, 2010.
• 29 Sharma K., Bhardwaj B., Analysis of Disc Brakes in transient thermo-elastic conditions using ANSYS. National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19, 20and 21, Paper no.58, 2010.

Professional Affiliations

• 01Member, Indian Society for Technical Education [ISTE]
• 02Faculty Associate Member, ASME Student Chapter GLA
• 03University Associate Member, Indian Institution of Production Engineers [IIPE]

Research Center Establishment, Training Programs & Achievements

• 01Micro-Nano Development Research Centre (MNDRC) was developed in the year 2015 with the help of internally funded project.
• 02Advance Software Lab (ASL) was developed in the year 2011, equipped with latest software and hardware combinations.
• 03Attended GIAN course on “Synthesis, Characterization, Processing and Applications of Nanomaterials” to be held at National Institute of Technology Warangal (NIT Warangal) during 7-11th March 2016.
• 04Attended DPAT-2015 Short Term Training Program on “Rapid Prototyping and Autodesk tools” organized by MNNIT, Allahabad from 27 Feb to 4th March 2015.
• 05Attended ISTE-SRM Short Term Training Program on “Advances in Refrigeration, Air conditioning and Cryogenics” organized by Anand Engineering College, Keetham, Agra on 31st March to 6th April 2014.
• 06Participated in a one week Self -financed Short Term Course on CAE (11th July – 15th July 2013) sponsored by All India Council of Technical Education and organized by Mechanical Engineering Department, MNNIT, Allahabad.
• 07Attended the workshop cum international conference on “Composites for 21st century current and future trends”, 4-7 January 2011, at IISC Bangalore. The course was sponsored by North Carolina A& T state University and Indian Society for advancements of materials and process engineering.
• 08Participated in three days workshop on “Elements and Application of MATLAB in Engineering” (29-31 October 2010) organized by dept. of Mechanical Engineering of GLA University, Mathura India.
• 09Participated in a two weeks STAFF DEVELOPMENT PROGRAM on CAD/FEM (21st July – 2nd Aug 2008) sponsored by All India Council of Technical Education and organized by Mechanical Engineering Department, MNNIT, Allahabad.
• 10I had designed the model of the nature friendly car (ELF ELECTRA) by using Pro/Engineer Wild Fire 2.0 (The news was published in Economic Times March 26, 2006).