Admission 2022

Admission Inquiry

Submit
Dr. Vijay Kumar Dwivedi

Dr. Vijay Kumar Dwivedi

  • Professor
    Institute of Engineering & Technology

  • Department

    Department of Mechanical Engineering

  • Experience

    20+ years Teaching/Research experience in the field of Mechanical Engineering

  • Qualifications

    • PhD (Mechanical Engineering), Motilal Nehru National Institute of Technology Allahabad in 2015
    • Thesis Title: Analysis of Hybrid (Hydrostatic/Hydrodynamic) Journal Bearing
    • Thesis Supervisors: Prof. Satish Chand and Prof. K.N. Pandey
    • M.Tech(Maintenance Engineering and Tribology), ISM Dhanbad (Now IIT(ISM) Dhanbad) in Dec-2001
    • B.Tech (Mechanical Engineering), IET, CSJM University Kanpur (Now UIET, CSJM University Kanpur) in 2000

  • Ph.D

    Thesis Supervised

  • Awarded/ Completed03

    Working06

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed16

    Working03

Patent

  • 01 Title of Patent (Granted on 19/04/2021): A Drum Drier for Optimal Preheating of Plastic Scrap Patent Application No. 202011037415, File date: 8/9/2020, Published date 09.10.2020 FER Date: 18/1/2021, Patent No. 364868
  • 02 Title of Patent (Granted on 31/12/2020): I-CoS (Ignition cut off System) Patent Application No.201911054343 A, Patent No. 354941, File Date: 28/12/2019 Publication date: 10/01/2020
  • 03 Title of Patent (Granted on 27/10/2020): Aqua-Air Fixture for Friction Stir welding Patent Application No.201811049186, Patent No. 350177, Published Date: 15/02/2019 FER Date: 27/05/2020, File Date: 26/12/2018
  • 04 Title of Patent (FER received): A Guide Bending Machine, FER Date: 18/11/2019 Patent Application No.201811037429
  • 05 Title of Patent (Published): Foot operated washing station with attendance and temperature recording (FOWS-ATR) Patent Application No. 202011024340, Published Date: 21/08/2020,
  • 06 Title of Patent (FER submitted): Smart Car Ignition System (SCI-S) Patent Application No.: 202011025401 File Date: 17/6/2020, Published Date: 21.08.2020, FER 15/3/2021
  • 07 Title of Patent (FER submitted): Weight-Automatic-Key Patent Application No. 201911052366 A, File Date: 10/06/2020File Date: 17/12/2019, Publication date: 03/01/2020
  • 08 Title of Patent (FER submitted): A Tool Grinding Fixture Patent Application No.201911052914, File Date: 19/12/2019, Publication date: 03/01/2020
  • 09 Title of Patent (Published): IOT based Grease Trap for Kitchen Sinks (IBGTKS) Patent Application N o. 202011038249, Published date: 16.10.2020
  • 10 Title of Patent (Published): IOT enabled holding device for urine bag & liquid infusion for patient Patent Application No. 202011038401, Published date: 16.10.2020
  • 11 Title of Patent (Published): SOLAR ENERGY ASSISTED STAIR CHAIR (SEA-SC) Patent Application No. 202011052134, File Date: 30/11/2020, Publication date: 11.12.2020
  • 12 Title of Patent (Published): Regenerative Braking system Patent Application No. 202011045682, File Date: 20/10/2020, Publication Date: 06.11.2020.
  • 13 Title of Patent (Published): SENSOR INSTRUMENTED WINDOW (SIW) Patent Application No. 202011054138, File Date: 12.12.2020, Publication date: 22.01.2021.
  • 14 Title of Patent (Published): ULTRASONIC SANITIZING MACHINE (USSM) Patent Application No. 202111006552, File Date: 17.02.2021 Publication date: 12.03.2021.
  • 15 Title of Patent (Published): SMART OXYGEN CYLINDER FOR HOSPITAL (SMART-OCT) Patent Application No. 202111050858, File Date: 06.11.2021 Publication date: 12.11.2021.
  • 16 Title of Patent (Published): SMART INDO-WESTERN CONVERTIBLE TOILET SEAT (SIW-CTS) Patent Application No. 202111054079, File Date: 23.11.2021 Publication date: 10.12.2021.
  • 17 Title of Patent (Published): FOOT OPERATED TOILET WASHBASIN TAP FOR PREVENTING HUMAN FROM MICROBIAL CONTAMINATION, Patent Application No. 202111051784, File Date: 11.11.2021 Publication date: 26.11.2021.
  • 18 Title of Patent (Published): PCM EQUIPPED WATER TANK, Patent Application No. 202211012541, File Date: 08.03.2022 Publication date: 18.03.2022.
  • 19 Title of Patent (Published): MOBILE PHONE CHARGING CUT-OFF SYSTEM, Patent Application No. 202211012542, File Date: 08.03.2022 Publication date: 18.03.2022.

Consultancy Project Details

  • 01 R.S. Electricals SF-2, Solitare Business park, Plot No.46, Sector no.9/c, Gandidham-Kutch-Gujrat, Repairing & Replacement of Tie Bearing, Rope Drum Bearing, Slew bearing used in cranes at KANDLA PORT TRUST SITE (Duration 9/12/2018- 8/12/2019)
  • 02R.S. Electricals SF-2, Solitare Business park, Plot No.46, Sector no.9/c, Gandidham-Kutch-Gujrat, Repairing & Replacement of Tie Bearing, Rope Drum Bearing, Slew bearing used in cranes at KANDLA PORT TRUST SITE (Duration 10/12/2017- 9/12/2018)

Project approved from GLA Univesity

1. Title of the Proposal: Geothermal energy utilization for cooling/heating of space by Earth Tube Heat Exchanger (ETHE).
Project duration:1 year
Category: 2
Study Type: Community development
Total Budget: INR 5, 00,000/-
Date of approval: 23/12/2021

Publications (Journal)

SCI Publication

  • 01 Dwivedi, V.K. Sharma, P., Kumar D. (2021)., Modelling and Genetic Algorithm approach for optimization of atmospheric plasma spraying based thermal barrier coatings structure for the Inconel718 superalloy, Surface Review and Letters, Surface Review and Letters (Accepted)
  • 02 Ojestez Tripathi, V.K. Dwivedi, Mayank Agrwal, (2021) Microstructural-mechanical co-relation for Al2O3 reinforced Aluminum metallic foam processed by compaction and sintering, Journal of the Australian Ceramic Society, https://doi.org/10.1007/s41779-021-00698-8
  • 03 V. Chaudhary, P. P. Das, R. Sahu, K.Srinivas, V. K. Dwivedi (2021), An investigation on thermal and chemical behavior of jute/hemp/flax fiber reinforced woven composites and its hybrids, Journal of Engg. Research, ICCEMME Special Issue,pp 1-15. DOI : 10.36909/jer.ICCEMME.15753.
  • 04 S. P. Dwivedi, R. Sahu, A. Saxena, V. K. Dwivedi, K. Srinivas, S. Sharma, (2021), Recovery of Cr from CCLW and its Utilization as reinforcement along with Waste SAC and grinding sludge in the AA 5052 based metal matrix composites, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, DOI: 10.1177/09544089211038385- (IF-1.62)
  • 05 Dwivedi, V.K., Kumar D. (2021)., Behaviour of APSed TBCs subjected to cooling media in thermal cycle system, Surface Review and Letters, 28(11), Article no. 2150103 (IF-1.152) https://doi.org/10.1142/S0218625X21501031 .
  • 06 Dwivedi, V.K. Sharma, P., Kumar D. (2021)., Modelling and multi-objective optimization for APSed Thermal Barrier Coatings on IN718, Surface Review and Letters 28(6), Article no. 2150040. (IF-1.152)
  • 07 Dwivedi V. K., Pathak P, Sharma K, and Sarswat, M. Effect of groove location on pressure profile of twin axial groove journal bearing, Journal of Scientific and Industrial Research (JSIR). Vol. 79 Dec-2020 pp. 1049-1052, 2020. (IF-1.056) 08. Dwivedi V.K., Chand S., Pandey K.N., Stability Analysis of Twin Axial Groove Hybrid Journal Bearing, Journal of Applied Fluid Mechanics, Vol. 9, No.6, pp- 2763-2768, 2016, ISSN- 1735-3572. (IF-0.689)

Scopus Journal Publication

  • 01 Mohan, MVN, Dwivedi, V.K. Generation of random microstructure in fiber reinforced composites and its comparison with carbon/carbon composite test samples through statistical analysis, Advances in materials and processing technologies DOI: 10.1080/2374068X.2022.2033047. Published on 16/2/22
  • 02 Islam, A., Dwivedi, S.P., Yadav, R., Dwivedi V.K., Development of Aluminium Based Composite by Utilizing Industrial Waste and Agro-Waste Material as Reinforcement Particles. J. Inst. Eng. India Ser. D (2021). https://doi.org/10.1007/s40033-021-00292-z
  • 03 R. Yadav, S. P. Dwivedi, and V. K. Dwivedi, A. Islam, Microstructure and Mechanical Testing of Al/Graphite/Fly-ash Metal Matrix Composite Material, World journal of engineering, https://doi.org/10.1108/WJE-07-2021-0408
  • 04 Islam, A. Dwivedi V.K., Dwivedi S.P., (2021) Development of Marble Dust/Waste PET Based Polymer Composite Material for Environmental Sustainability: Fabrication and Characterizations, Materials Performance and Characterization 10, no. 1 (2021): 538–553. https://doi.org/10.1520/MPC20210034
  • 05 Islam, A. Dwivedi V.K., Dwivedi S.P., (2021), Extraction of Cr from Chrome Containing Leather Waste to Develop Composite at Optimum Casting Parameters using Response Surface Methodology, World journal of engineering, DOI 10.1108/WJE-10-2020-0517.
  • 06 Dwivedi, V.K., Kumar D. (2021), Graphene as a stimulus for mechanical strength in Glass Fibre Reinforced Polymers composite, World journal of engineering (Springer) DOI 10.1108/WJE-02-2021-0110.
  • 07 Sharma, P., Dwivedi, V.K. Kumar D. (2021)., Characterization of Anode Plasma deposited IN718 TBC system after thermal cycle shocking test Technologies, Advances in materials and processing technologies, Accepted on 21/6/2021.
  • 08 Sharma, A., Dwivedi, V.K. Effect due to tool design during FSW Process of Aluminium Alloy AA 7075-T6, Advances in materials and processing technologies Accepted on 18/6/2021 DOI:10.1080/2374068X.2021.1946336.
  • 09 Sharma, A., Dwivedi, V.K. Influence of tool rotational speed on mechanical properties of Aluminium Alloy AA 7075-T6 during friction stir welding process, Advances in materials and processing technologies DOI: 10.1080/2374068X.2021.1953928 Accepted on 30/6/202.
  • 10 Mohan, MVN, Dwivedi, V.K. Prediction of elastic properties of Unidirectional Carbon Carbon composites using analytical and numerical homogenization methods, Advances in materials and processing technologies DOI: 10.1080/2374068X.2021.1953922
  • 11 R. Yadav, S. P. Dwivedi, and V. K. Dwivedi, A. Islam, Analysis of Mechanical properties of Al-based Metal matrix composite Reinforced with ES and RHA, World journal of engineering (Emerald ) DOI 10.1108/WJE-02-2021-0079
  • 12 Islam, A. Dwivedi V.K., Dwivedi S.P., (2021) Effect of Friction Stir Process Parameters on Mechanical Properties of Al/Eggshell/SiC Composite Material, Annales de Chimie - Science des Matériaux Vol. 45 No. 1, pp. 51-57
  • 13 R. Yadav, S. P. Dwivedi, and V. K. Dwivedi, (2021) Synthesis and Mechanical Behavior of Ball-Milled Agro-Waste RHA and Eggshell Reinforced Composite Material, Materials Performance and Characterization 10, no. 1 (2021): 1–18. https://doi.org/10.1520/MPC20190247
  • 14 Islam, A. Dwivedi V., Dwivedi S.P., (2021) Effect of friction stir process parameter on tensile strength of eggshell and SiC reinforced Al-based composite, World journal of engineering (Springer) Vol. 18 No. 1, pp. 157-166.
  • 15 Dwivedi, V.K. Dwivedi, S.P., Rajat Yadav (2020). Effect of heat treatment process on microstructure and mechanical behaviour of Al/MgO composite material, Advances in materials and processing technologies, https://doi.org/10.1080/2374068X.2020.1829955.
  • 16 Sharma, P., Dwivedi, S.P., Dwivedi, V.K. (2020). Physical, mechanical and thermal behaviour of high entropy materials. Annales de Chimie - Science des Matériaux, Vol. 44, No. 2, pp. 127-132. https://doi.org/10.18280/acsm.440208.
  • 17 Kumar S., Dwivedi, S.P. and Dwivedi V.K. (2020), Synthesis and Characterization of Ball-Milled Eggshell and Al2O3 Reinforced Hybrid Green Composite Material, Journal of Metals, Materials and Minerals. Vol. 30, No. 2 pp. 67-73. 2020
  • 18 Kumar D., Garima Shree, Dwivedi, V.K. (2020) Wear and hardness evaluation of electrodeposited Ni-SiC nanocomposite coated copper, International Journal of Microstructure and Materials Properties, 15 (2), 78-106. 10.1504/IJMMP.2020.106921 ISSN:1741-8429.
  • 19 Dwivedi V. K., Pathak P., Effect of axial groove location, length & width ratio on the bearing properties and stability, Journal of Computational & Applied Research in Mechanical Engineering (JCARME), Vol. 10. No. 2, pp. 525-537, 2021, DOI 10.22061/jcarme.2019.4411.1541.
  • 20 Dwivedi, V. and Kumar D., Evaluation and Prediction of Mechanical Properties of HDPE grade P5300 using Molecular Dynamics, International Journal of Computational Materials Science and Surface Engineering, Vol. 9 No. 2, pp.85-104. ISBN/ISSN: 1753-3473. DOI: 10.1504/IJCMSSE.2020.10030504
  • 21 Dwivedi V.K., Chand S., Pandey K.N. (2015) Effect of the groove dimensions and orientation on the static and dynamic performance of non-recessed hybrid journal bearing. Advances in Intelligent Systems and Computing, Vol 1089. pp. 555-56.
  • 22 Dwivedi V.K., Chand S., Pandey K.N., Analysis of hybrid (hydrodynamic / hydrostatic), journal bearing, Advanced Materials Research, Vol. 650 (2013), pp. 385-390, Trans Tech Publications, Switzerland.
  • 23 Dwivedi V.K., Chand S., Pandey K.N., Study of the lubricant supply arrangement in non recessed hybrid journal bearing, Proceedings of the ASME Design Engineering Technical Conference, Volume 5, 2013, Article number V005T11A040.
  • 24 Dwivedi V.K., Chand S., Pandey K.N., Selection of fluid film journal bearing: A fuzzy approach, Advances in Intelligence and soft computing, Volume 166 AISC, Issue VOL. 1, 2012, Pages 311-320 Springer, pp. 311-320.

Scopus Journal Publication Open Access

  • 01 Bhardwaj G., Sharma A., Dwivedi V. K. Augmentation of the Thermal Efficiency of PTC using CeO2 Nanofluid, IJEAT, 2019 9(1), 6268-6272
  • 02 Pathak P., Dwivedi V. K. Using a Fuzzy Logic-Based Emotional Intelligence Framework for Testing Satisfaction of Faculty in an Outcomes-Based Educational System, IJITEE, 2019 9(1), 826-831.
  • 03 Shahbuddin, Dwivedi V. K. ,SharmaA. Experimental Investigation of the Mechanical Properties and Microstructure of AA 7075-T6 during Underwater Friction stir Welding Process, IJEAT, 2019 8(4), 1289-1294.
  • 04 Vibha, Dwivedi V. K. and Kumar D. Nano- Microstructural Characterization of Inconal-718 with Thermal Barrier Coating after Thermal Shock Tests, IJITEE, 2019 8(5), 36-41.
  • 05 Sharma A., Dwivedi V. K. A Comparative Study of Micro-structural andMechanical properties of Aluminium Alloy AA6062 onFSW and TIGW Processes, IJITEE, 2019 8(5), 337-342.
  • 06 Shahbuddin, Dwivedi V. K., Effect of tool geometry of friction stir welding on mechanical properties of AA-7075 Aluminium alloy, IJMET, 2018,9(5), 625-633.

Non-Scopus/UGC listed/peer-review Journal Publication

  • 01 Sharma, A., Dwivedi, V.K., Sharma, D. (2020): Industry 4.0 A Smart Factory: An Overview, Advanced Science, Engineering and Medicine, 12(7), 914-917. DOI: https://doi.org/10.1166/asem.2020.2648.
  • 02 Shahbuddin, Dwivedi V. K., Study of friction stir welding-A Review, IJLTET, Feb 2018, 9(4), 027-037.
  • 03 Sharma Adarsh, Dwivedi V. K., Study of Properties of Sintered Forged Aluminium Powder Made by Unconventional Die, International Journal of Engineering Technology Science and Research (IJETSR), 2018, 5(4), 737-742. ISSN 2394 – 3386.
  • 04 Shahbuddin, Dwivedi V. K., Fabrication and design of fixture with a new technique for friction stir welding, IJETSR, Jan 2018, 5(1), 1540-1544.
  • 05 Gupta S.K., Dwivedi V.K., Sachdeva S., Singh S., Investigation of coefficient of skin friction and axial velocity of fully developed turbulent flow through pipe, Science & Technology, Science & Technology the International Quarterly journal, 2016, 2(7), 312-318, ISSN 2394-3750.
  • 06 Gupta S.K., Dwivedi V.K., Dissipation index and efficiency of free hydraulic jump in horizontal prismatic channel: an experimental approach, Discovery Engineering, An International Journal, 2016, 4(12), 245-251.
  • 07 Tyagi S., Dwivedi V.K., Sharma K., Evaluation of mechanical properties of single-walled carbon nanotube/HDPE-P5300 composites using molecular dynamics, Advanced Material Manufacturing & Characterization, 2016, Vol. 6, Issue 1, 58-64.
  • 08 Dwivedi V.K., Pathak P., Performance of Supply Chain in an Uncertain Environment using Fuzzy Logic, International Journal on Design & Manufacturing Technologies, Vol.9 No.2 July 2015.
  • 09 Dwivedi V.K., Chand S., Pandey K.N., Effects of Turbulence on Dynamic Performance of Accelerated/ Decelerated Hydrodynamic Journal Bearing System, International Journal of Design Engineering, 5(3) (2014) 256-288.
  • 10 Chahar A.S., Dwivedi V.K., Computational Investigation of Shell Liquid of Shell and Tube Heat Exchanger Permitting the Consequence of Rod Baffles Temperament on Liquefied Drift, Technology Letters, 1(11) (2014) 22-26.
  • 11 Singh B., Soni D., Dwivedi V.K., A Comparative Study of Static and Dynamic Characteristics of Wave Bearings and Cylindrical Journal Bearings, Technology Letters, 1(11) (2014) 17-21.
  • 12 Dwivedi V.K., Chand S., Pandey K.N., Effects of Reynolds Number on Linear and Non- Linear Journal Trajectory at Constant Speed of Non Recessed Hybrid Journal Bearing, International Journal of Pure & Applied Research in Engineering & Technology, 1 No.8 (2013) 1-8.
  • 13 Dwivedi V.K., Chand S., Pandey K.N., Effect of Geometry of Lobes and L/D Ratio on the Static Performance of 2-Lobe Hybrid Journal Bearing, International Journal of Pure & Applied Research in Engineering & Technology, 1 No.8 (2013) 64-71.
  • 14 Pathak P., Dwivedi V.K., Fuzzy based pricing model for old age insurance, International Journal for Fuzzy Logic Systems, 3 (1) (2013) 47-54.
  • 15 Gupta S.K., Mehta R.C., Dwivedi V.K., Singh A.P., Modeling of Sequent Depth Ratio and Relative Height of the Hydraulic Jump in Horizontal Prismatic Channels, International Journal of Advances in Thermal Science and Engineering, Serial Publication, New Delhi, January – June 2011, Vol. 2, No.1, Page No. 73 – 78.
  • 16 Gupta S.K., Mehta R.C., Dwivedi V.K., Modeling of Hydraulic Jump Characteristics in Sloping Prismatic Channels for Design and Manufacturing of Stilling Basin, International Journal of Manufacturing Technology and Research, July – Dec 2010, Vol. 6, No.2, Page No. 37 – 41, ISSN: 0973 – 0281.
  • 17 Gupta S.K., Mehta R.C., Dwivedi V.K., Modelling of Relative height of the Hydraulic Jump in Horizontal Prismatic Channels Using C Programming, Journal of the Instrument Society of India, Vol. 41(4), PP- 248-250, Dec-2011 (Published from Department of Instrumentation, IISC Bangalore) ISSN 0970-9983.

Book Publication

  • 01 A comparative characteristics of wave & cylindrical journal bearing; LAMBERT Academic Publishing (LAP), (2017), ISSN-978-613-9-96379-9

Book Chapter Publication

  • 01 Sharma P., Dwivedi V.K., Kumar D. (2022) A Comparative Analysis of Different Techniques of Thermal Barrier Coating. In: Dubey A.K., Sachdeva A., Mehta M. (eds) Recent Trends in Industrial and Production Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-3135-1_1
  • 02 Dwivedi V.K., Islam A., Sharma A. (2022) Application of 5s Methodology in a Small-Scale Enterprise: Case Study. In: Dubey A.K., Sachdeva A., Mehta M. (eds) Recent Trends in Industrial and Production Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-3135-1_4
  • 03 Dwivedi V.K., Islam A. (2022) A Review on Various Types of Burr Formation in Drilling. In: Dubey A.K., Sachdeva A., Mehta M. (eds) Recent Trends in Industrial and Production Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-3135-1_3
  • 04 Sharma A., Dwivedi V.K. (2022), Recent Development in Friction Stir Welding: An Advancement in Welding Technology. In: Dubey A.K., Sachdeva A., Mehta M. (eds) Recent Trends in Industrial and Production Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-3135-1_20
  • 05 Mahmood M., Dwivedi V.K. and Yadav R., (2021) Effect of Current on the Hardness of Weld Bead Generated by TIG Welding on Mild Steel, In Dr. Rakesh Kumar Phanden, Dr. K. Mathiyazhagan, Dr. Ravinder Kumar, Prof. J. Paulo Davim, Springer Singapore, Advances in Industrial and Production Engineering, Lecture Notes in Mechanical Engineering pp. 739–745.
  • 06 Akash Sharma, Dwivedi V.K., Shahabuddin, (2020) An Experimental study of mechanical and microstructural properties of AA7075-T6 by using UWFSW process. In book:Characterization,Testing, Mesurment and Metrology, pp-161-185, DOI: 10.1201/9780429298073-10.
  • 07 Sharma P., Dwivedi V.K. and Kumar D., (2021) A Review On Thermal Barrier Coatings (Tbc)- Usage and Effect on Internal Combustion Engine, In Sikarwar B.S., Sundén B., Wang Q., Advances in Fluid and Thermal Engineering. Lecture Notes in Mechanical Engineering, pp 77-85.
  • 08 Pathak P., Dwivedi V. K., Sharma A., (2018) Numerical solution of load-bearing capacity of journal bearing using shape function, In Srinivas acharya D., Reddy K., Numerical Heat Transfer and Fluid Flow. Lecture Notes in Mechanical Engineering, pp 295-303.
  • 09 Srivastava N., Dwivedi S.P., Dwivedi V.K. and Yadav R. “Effect of MgO Powder addition in Synthesis of Recycled Waste Bagasse Reinforced Green Composite Materials”, In K. Govindan , H. Kumar, S. Yadav, Advances in mechanical and Materials Technology, Lecture Notes in Mechanical Engineering https://doi.org/10.1007/978-981-16-2794-1_67
  • 10 Singh R. and Dwivedi V.K. “Feasibility and performance analysis of earth tube heat Exchanger”, In K. Govindan , H. Kumar, S. Yadav, Advances in mechanical and Materials Technology, Lecture Notes in Mechanical Engineering https://doi.org/10.1007/978-981-16-2794-1_10
  • 11 Vishwakarma S., Dwivedi V.K. and Agrawal M.K., “Optimization Techniques used to Optimize Process Parameters of Submerged Arc Welding: A Review”, EMSME-2020, In K. Govindan , H. Kumar, S. Yadav, Advances in mechanical and Materials Technology, Lecture Notes in Mechanical Engineering https://doi.org/10.1007/978-981-16-2794-1_6
  • 12 Gupta A, Dwivedi V.K. Analysis of output parameter of EDM: A Review, EMSME-2020, In K. Govindan , H. Kumar, S. Yadav, Advances in mechanical and Materials Technology, Lecture Notes in Mechanical Engineering https://doi.org/10.1007/978-981-16-2794-1_74

International Conferences

Scopus Index Conference Publication

  • 01 Ayush Trivedi, Vijay Kumar Dwivedi, Mayank Agarwal, Cladding techniques that achieve a solid metallurgical bond with the least amount of base material dilution - An overview, E3S Web of Conferences 309, 01091 (2021), https://doi.org/10.1051/e3sconf/202130901091.
  • 02 Mohan M.V.N, Ramesh Bhagat Atul and Vijay Kumar Dwivedi, Effect of spatial distribution of fibers on elastic properties of unidirectional carbon/carbon composites, E3S Web of Conferences 309, 01214 (2021) ICMED 2021 https://doi.org/10.1051/e3sconf/202130901214
  • 03Devendra P. singh, Vijay Kumar Dwivedi, Mayank Agarwal The key attributes of processing parameters on semi-solid metal casting: An Overview, E3S Web of Conferences 309, 01089 (2021) ICMED 2021 https://doi.org/10.1051/e3sconf/202130901089
  • 04 Vishwakarma S., Dwivedi V.K. Optimization of Process Parameter of submerged Arc Welding by Taguchi Method, Material Today: Proceeding, DOI: 10.1016/j.matpr.2021.06.141
  • 05 Ojestez Tripathi, Singh D.P., Dwivedi V.K. and Agarwal M., A Focused Review on Aluminum Metallic Foam: Processing, Properties and Applications, Material Today proceedings DOI: 10.1016/j.matpr.2021.05.099, 2021.
  • 06 Yadav R., Dwivedi V.K., Kishore, C., Bansal G., Differentiate mechanical properties of the metal joining process through FCW, FSW and FSP : A Review, Material Today: Proceeding , DOI: 10.1016/j.matpr.2020.11.917, 2021.
  • 07 Bansal G, Kishore, C, Selvaraj, R. M., Dwivedi V.K., Experimental determination of the effect of change in relative roughness pitch on the thermo-hydraulic performance of air heater working with solar energy, Material Today: Proceeding DOI: 10.1016/j.matpr.2021.01.406, 202.
  • 08 Verma S, Dwivedi V.K., and Dwivedi S.P., Utilization of Waste Spent Alumina Catalyst for the Development of Valuable Product - A Review, Material Today: Proceeding DOI:10.1016/j.matpr.2021.06.146.
  • 09 Dwivedi V.K., Gupta S. K., Verma, H, Yadav, N. and Yadav H., Improvement in Energy Efficiency & Heat Loss Minimization during Boiler Operation: A Case Study, IOP Conf. Series: Material Science and Engineering Volume 1116, Article no. 012044, 2021.
  • 10 Gupta S. K., Dwivedi V.K., Kumar, N., Scenario of Small Hydro Power Plant (SHP) in India and Effects on Climate Change: An Eco-friendly Approach Towards Sustainability, IOP Conf. Series: Material Science and Engineering, Volume 1116, Article no. 01208, 2021.
  • 11 Mahmood M., Dwivedi V.K., Islam A. Engineering Workshop generate waste: A plan for its management, IOP Conf. Series: Material Science and Engineering, Volume 1116, Article no. 012043, 2021
  • 12 Verma S Dwivedi V.K., and Dwivedi S.P., Utilization of Aluminium Dross for the Development of valuable Product - A Review, Material proceedings Today, Volume 43, pp. 547-550.
  • 13 Sharma P., Dwivedi V.K. and Dwivedi S.P., “Development of High Entropy Alloys: A Review”, Material proceedings Today, Volume 43, pp. 502-509.
  • 14 Yadav R., Dwivedi V.K., and Dwivedi S.P., “Eggshell and Rice Husk Ash Utilization as Reinforcement in Development of Composite Material: a review”, Material Today proceedings, Volume 43, pp. 426-433.
  • 15 Kumar S., Dwivedi V.K., and Dwivedi S.P., “Waste Material Produced From Industry and Its Utilization in Development of Green Composite Material: a review”, Material proceedings Today, Volume 43, pp.490-496
  • 16 Alam P. Dwivedi V.K., Islam A., Design and development of an indigenous drum dryer for preheating of plastic scrap, IOP Conf. Ser.: Mater. Sci. Eng., Volume 998, Article no. 012031.
  • 17 Sharma, A., Dwivedi V.K, Effect of spindle speed, feed rate and cooling medium on the burr structure of Aluminum through Milling, IOP Conf. Ser.: Mater. Sci. Eng., Volume 998, Article no. 012028
  • 18 MVN, Dwivedi V.K., Prediction of solid rocket motor performance characteristics using CFD and validation with experimental data, IOP Conference SER. Mater. Sci. Eng., Volume 998, Article no. 012014
  • 19 Islam, A. Dwivedi V., Kamal Sharma, FEM analysis of robotized arc welded joint, IOP Conference SER. Mater. Sci. Eng., Volume 184, Article no. 01032, 2020. https://doi.org/10.1051/e3sconf/202018401032
  • 20 Islam, A. Dwivedi V.K., Effect of Drilling Speed, Drill Bit and Cooling Medium on the Burr Structure for Mild Steel, Materials today: Proceedings, Volume 28, Part 2, 2020, pp. 1407-1411. https://doi.org/10.1016/j.matpr.2020.04.812
  • 21 Shahabuddin, Dwivedi V. K., Sharma A., Influence on the Tensile Properties of AA7075-T6under Different Conditions during friction stir welding process, IOP Conference SER. Mater. Sci. Eng., Volume 691 pp. 012001.
  • 22 Kumar S. and Dwivedi V. K. Analysis of Micrograph and Material properties of Gas Welded butt Joints of Mild Steel plate, Materials today: Proceedings, Volume 26, Part 2, 2020, pp. 1723-1726. https://doi.org/10.1016/j.matpr.2020.02.363.
  • 23 Sharma P., Dwivedi V. K. and Kumar D. Effect of Shape on the Mechanical Properties of Thermal Barrier Coating of YSZ7-8, Materials today: Proceedings, Volume 26, Part 2, 2020, pp. 1921 1925.https://doi.org/10.1016/j.matpr.2020.02.420.
  • 24 Sharma A., Dwivedi V. K. and Singh Y.P. Effect on Ultimate Tensile Strength on Varying Rotational Speed, Plunge Depth and Welding Speed during Friction Stir Welding Process of Aluminium Alloy AA7075, Materials today: Proceedings, Volume 26, Part 2, 2020, pp. 2055-2057. https://doi.org/10.1016/j.matpr.2020.02.444.
  • 25 Yadav, R. K., Dwivedi V. K. and Sharma A. Sustaining Behavior of Sintered Forged Aluminum Powder Specimens Made by Unconventional Die, Materials today: Proceedings, Volume 26, Part 2, 2020, pp. 475- 481.https://doi.org/10.1016/j.matpr.2019.12.103.
  • 26 Sharma A., Dwivedi V. K., Comparison of Micro structural and Mechanical properties of Aluminium Alloy AA6062 on FSW and TIGW Processes, Materialstoday: Proceedings, 25(4), 2020, pp. 903-907.https://doi.org/10.1016/j.matpr.2019.12.429.
  • 27 Sharma A., Dwivedi V. K. Effect of Milling Parameters on Surface Roughness: An Experimental Investigation, Materials today: Proceedings, 25(4), 2020, pp. 868-871. https://doi.org/10.1016/j.matpr.2019.11.256.
  • 28 Kumar A. Sharma K. Singh P.K. and Dwivedi V.K., Mechanical characterization of vacancy defective single-walled carbon nano-tube/epoxy composites, Materials today Proceedings, 2017, 4(2 Part A), 4013-4021.
  • 29 Kumar A. Sharma K. and Dwivedi V.K., Evaluation of Elastic moduli for different Patterns of Stone-Thrower-Wales Defect in Carbon Nanotubes/epoxy Composites, Materials today Proceedings, 2017, 4(9), 9423-9428.
  • 30 Dwivedi V.K., Chand S., Pandey K.N., Effect of the groove dimensions and orientation on the static and dynamic performance of non-recessed hybrid journal bearing. Advances in Intelligent Systems and Computing, Vol 1089. pp. 555-56., Aug. 19-21, 2014, Las Vegas.
  • 31 Dwivedi V.K., Chand S., Pandey K.N., Study of the lubricant supply arrangement in non recessed hybrid journal bearing, Proceeding of ASME Design Engineering Technical Conference, vol.5, Aug. 04-07, 2013, Portland.
  • 32 Dwivedi V.K., Chand S., Pandey K.N., Effect of different flow regime on the static and dynamic performance parameter of hydrodynamic bearing, Procedia Engineering, vol.51, pp: 520-528, 2013.
  • 33 Dwivedi V.K., Chand S., Pandey K.N., Effect of number and size of recess on the performance of hybrid (hydrostatic/hydrodynamic) journal bearing, Procedia Engineering, vol.51, pp: 810-817, 2013.
  • 34 Gupta S.K., Dwivedi, V.K., Modeling of relative length and relative energy loss of free hydraulic jump in horizontal prismatic channel, Procedia Engineering, vol.51, pp: 529-537, 2013
  • 35 Dwivedi V.K., Chand S., Pandey K.N., Selection of fluid film journal bearing: A fuzzy approach, Advances in Intelligence and soft computing, Volume 166 AISC, pp. 311-320, 2012.

Non-Scopus Index International Conference Publication

  • 01 Kumar S., Dwivedi V.K and Dwivedi S.P., Synthesis and Characterization of Eggshell and Al2O3Reinforced Hybrid Green Composite Material, 3rd international conference on science and engineering of materials(ICSEM-2019),July 19-21,2019.
  • 02 Yadav R., Dwivedi V.K and Dwivedi S.P., Synthesis and Mechanical Behavior of Agro Waste RHA and Eggshell Reinforced Hybrid Composite Material, 3rd international conference on science and engineering of materials (ICSEM-2019),July 19-21,2019.
  • 03 Sharma P., Dwivedi V.K and Dwivedi S.P., Synthesis of Mechanical Behavior of High Entropy Material,3rd international conference on science and engineering of materials(ICSEM-2019),July 19-21,2019.
  • 04 Sharma A. and Dwivedi V.K., Effect of Milling Parameters on Surface Roughness: An Experimental Investigation, 2nd International Conference on Computational &Experimental Methods in Mechanical Engineering (ICCEMME-2019), GLBITM G. Noida, U.P., May 3-5 2019. ISBN: 978-81-940546-2-7. Paper ID-44
  • 05 Sharma A. and Dwivedi V.K., Comparison of Micro Structural and Mechanical Properties of Aluminium Alloy AA6062 on FSW and TIGW Processes, 2nd International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2019), GLBITM G. Noida, U.P., May 3-5 2019. ISBN: 978-81-940546-2-7. Paper ID-50
  • 06 Shahabuddin and Dwivedi V.K., Influence on the Tensile Properties of AA7075-T6 Under Different Conditions During Friction Stir Welding Process, 2nd International Conference on Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2019), GLBITM G. Noida, U.P., May 3-5 2019. ISBN: 978-81-940546-2-7. Paper ID-21
  • 07 Sharma A. and Dwivedi V.K., A Framework of Reliability Centered Maintenance, ICRESH-2019, 4th International Conference on Reliability, Safety and Hazards,January 10-13, IIT Madras.
  • 08 Sharma A., Sharma D., Dwivedi V.K., Comparison of Mechanical and Micro structural properties of Aluminium Alloy AA6062 on TIGW and FSW Processes, ICNTE-2019, International Conference on Nascent Technologies in Engineering, January 4-5, 2019, Fr. C. Rodrigues Institute of Technology, Vashi.
  • 09 Sharma A. and Dwivedi V.K., Non-Conventional Energy Scenario in India, ISME conference on Advances in Mechanical Engineering (MechanicalSystems and Sustainability), December 20-22, 2018, Dr B R Ambedkar NIT Jalandhar.
  • 10 Sharma A. and Dwivedi V.K., Overview of non-conventional energy and current status of India in renewable energy, International conference smart technologies for green and sustainable future, December 8-9, 2017, MANIT Bhopal.
  • 11 Sharma A. and Dwivedi V.K., Replacement of Kevlar with spider silk in body Armour, Advances in Materials & Processing: Challenges & Opportunities(AMPCO-2017), Nov 30- Dec 2, 2017, IIT Roorkee.
  • 12 Sharma A. and Dwivedi V.K., Structure and properties of spider silk as a super material, International conference on Materials & Manufacturing Concerns in Production of Quality Engineering Goods, March 27-29, 2017, HBTU Kanpur, ISBN- 978-93-86256-70-6, pp. 111-116.
  • 13 Anurag A., Pathak P. and Dwivedi V.K., Uncertainty in supply chain management using artificial neural network, International conference on Materials & Manufacturing Concerns in Production of Quality Engineering Goods, March 27-29, 2017, HBTU Kanpur, ISBN- 978-93-86256-70-6, pp. 256-262.
  • 14 Rai A. and Dwivedi V.K., Effect of temperature and strain rate of glass wool composite material with mechanical behavior, International conference on Materials & Manufacturing Concerns in Production of Quality Engineering Goods, March 27-29, 2017, HBTU Kanpur, ISBN- 978-93-86256-70-6, pp. 176-183.
  • 15 Dubey S. Jain Y., Rajput A. and Dwivedi V.K., Direct evaporative air cooling: A review, International conference on Materials & Manufacturing Concerns in Production of Quality Engineering Goods, March 27-29, 2017, HBTU Kanpur, ISBN- 978-93-86256-70-6, pp. 516-519.
  • 16 Kumar A., Garg A, Kumar M., Kumar N. and Dwivedi V.K., Comparative study of mechanical prtoperties for TIG AND FSW welding processes, International conference on Materials & Manufacturing Concerns in Production of Quality Engineering Goods, March 27-29, 2017, HBTU Kanpur, ISBN- 978-93-86256-70-6, pp. 363-367.
  • 17 Rai A., Pathak P., Dwivedi V.K., Green Supply Chain Management Using Fuzzy Set Theory Under Uncertainty, XXth Annual International Conference of The Society of Operations Management, ABV- Indian Institute of Information Technology and Management Gwalior, Dec. 22-24, 2016, ISBN Number: 9781786354181, Paper no. 92.
  • 18 Kumar A., Sharma K., Singh P.K. & Dwivedi V.K., Mechanical Characterization of vacancy defective single-walled carbon nanotube/epoxy composites, 5th International conference on Material processing and Characterization (ICMPC-2016),12-13 March, MANIT Bhopal. PP. 198
  • 19 Tyagi S., Dwivedi V.K., Operational Excellence through digital manufactring, XIX Annual International Conference of the Society of Operations Management (SOM 2015), IIM, Calcutta Dec-11-13-2015, Page No. 22.
  • 20 Tyagi S., Dwivedi V.K., Modelling and simulation of multi walled carbon nanotubes reinforced with HDPE grade P5300 Epoxy using Molecular Dynamics, 3rd International Conference on computational condensed matter phyics and material sciences, ABV- IIITM Gwalior, 18-22 Octomber-2015
  • 21 Chahar A.S., Dwivedi V.K., Computational Investigation of Pressure Drift in Pipes of Shell and Tube Heat Exchanger, International Conference on Recent Advances in Mechanical Engineering and Interdisciplinary Developments – March, 2014, (ICRAMID – 2014) Ponjesly College of Engineering, Nagercoil, pp. 77 – 81.
  • 22 Sharma R., Pathak D.K., Dwivedi V.K., Modeling & Simulation of Spring Mass Damper System in Simulink Environment, XVIII Annual International Conference of the Society of Operations Management (SOM 2014), IIT, Roorkee, Page No. 205-209, ISBN 978-93-84935-023.
  • 23 Sharma P., Tiwari M., Kumar D., Dwivedi V.K., Pathak D.K., A Case Study of CAEPIPE Base Design and Stress Analysis of Process Plant Piping System, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 696-702, ISSN 1941-9414.
  • 24 Kumar D., Dwivedi V.K. & Pathak D.K., Performance of abrasive water jet milling machine – A review, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 74-77, ISSN 1941-9414.
  • 25 Kumar D., Tiwari M., Dwivedi V.K. & Pathak D.K., A genetic Algorithm approach for optimizing the combination of process parameter for EDM of corbon fiber epoxy composites, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 74-77, ISSN 1941-9414.
  • 26 Kaushalyayan K.S., Tiwari M., Kumar D., Sharma K., Dwivedi V.K., Pathak D.K., Investigation of Process Parameters for EDM of Carbon Fiber Epoxy Composites using TOPSIS, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 163-169, ISSN 1941-9414.
  • 27 Baghel V., Dwivedi V.K., Pathak D.K., Comparative Study of Stress Analysis of a Plate with Three Hole, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 388-392, ISSN 1941-9414.
  • 28 Agrawal P.K., Dwivedi V.K., Pathak D.K., Comparative Study of Stress Analysis of a Plate with Hole at Centre, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 268-273, ISSN 1941-9414.
  • 29 Nagar S., Pathak D.K., Dwivedi V.K., An Automated Optimal Location of a Warehouse using MATLAB, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 331-337, ISSN 1941-9414.
  • 30 Sharma R., Pathak D.K., Dwivedi V.K., Modelling & Simulation of Spring Mass Damper System in Simulink Environment, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, December 22-24, 2014), and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 434-440, ISSN 1941-9414.
  • 31 Tandon U., Jindal S., Sharma, T.L. & Dwivedi V.K., Computational analysis of flow separation over backward facing step, International Conference on Advances in Triboogy (ICAT-14) NIT Calicut, 21 Feb-24 Feb- 2014, pp. 314-316.
  • 32 Jindal S., Sharma, T.L.,Tandon U., & Dwivedi V.K., Design of CFD analysis of contraction wall profile of open circuit suction type wind tunnel, International Conference on Advances in Triboogy (ICAT-14) NIT Calicut, 21 Feb-24 Feb- 2014, pp. 359-362.
  • 33 Thermal Cracks on gasket of shell and tube heat exchanger, International conference on Mechanical Engineering, Emerging Trends for Sustainability – 29-31 January, 2014, (IC MEETS – 2014) MANIT, Bhopal, pp. 1011 – 1018.
  • 34 Goswami R., Dwivedi V.K., Singhal S., Design, Simulation and Validation of an Subsonic (open circuit blow type) Wind Tunnel using Computational Fluid Dynamics (CFD) Technique, International Conference on Mechanical Engineering: Emerging Trends for Sustainability – 2014, 29 – 31 January, 2014, (IC MEETS – 2014) MANIT, Bhopal, pp. 862 – 871.
  • 35 Chahar A.S., Dwivedi V.K., Computational Analysis of Shell Fluid of Shell and Tube Heat Exchanger Allowing the Outcome of Baffles Disposition on Fluid Flow, International Conference on Industrial Engineering Science and Applications – 2014 (IESA-2014), 2 – 4 April, 2014, NIT, Durgapur, paper no. – 10.
  • 36 Goswami R., Singhal S., Dwivedi V.K., Design and Simulation of a Low Speed Wind Tunnel with Analysis of Wind Effects on an Airfoil (Virtually) using CFD, International Conference on Fluid Mechanics and Fluid Power, December 12-14, 2014, IIT, Kanpur, Paper Code: FMFP14-C-659.
  • 37 Gupta S.K., Dwivedi V.K., Chauhan J.K., Singh A. & Goswami R., 09 – 12 December 2012, Design and Simulation of Open Circuit Blow Down Type Wind Tunnel, Fourth International Congress on Computational Mechanics and Simulation (ICCMS 2012), IIT Hyderabad, A.P., Paper ID: 115.
  • 38 Singh A.K., Chauhan J.K., Gupta S.K., Dwivedi V.K., Design of CFD Analysis of Contraction Wall Profile of Open Circuit Blow Down Type Wind Tunnel I International conference on Innovative Technologies in Mechanical Engineering, 17-18 August 2012, KIET Ghaziabad, U.P. India, pp 26-32.
  • 39 Dwivedi V.K., Gupta S.K., Soni D., Soni P., Singh B., Effect of eccentricity ratio on pressure profile of short journal bearing I International conference on Innovative Technologies in Mechanical Engineering, 17-18 August 2012, KIET Ghaziabad, U.P. India, pp 225-230.
  • 40 Gupta S.K., Dwivedi V.K., Soni D., Singh B., Major Thrust to begin the Work of Indian Education for Sustainable Development of Society and Nation, 10 -12 November 2011, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number : 143 – 149, ISBN: 978 – 93 – 81583 – 10 – 4.
  • 41 Gupta S.K., Mehta R.C., Dwivedi V.K., Modeling of Relative Specific Energy before and after the Hydraulic Jump in Horizontal Prismatic Channel, 10 -12 November 2011, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 343 – 350, ISBN: 978 – 93 – 81583 – 10 – 4.
  • 42 Gupta S.K., Mehta R.C., Dwivedi V.K., Modeling of Relative Length and Relative Energy Loss of Hydraulic Jump in Sloping Prismatic Channels for Environmental Hazards Control, 2nd International Conference on Climate Change and Sustainable Management of Natural Resources, IASCA, 5– 7 December 2010, ITM Universe Gwalior, Paper No – CP 77
  • 43 Gupta S.K., Mehta R.C., Dwivedi V.K., Singh A.P., Modeling of Dissipation Index and Efficiency of Hydraulic Jump in Sloping Prismatic Channels, International Conference on Recent Trends in Engineering, Technology & Management, 26 – 27 February 2011, BIET, Jhansi, Paper No. 14, Page Numbers 80 - 85, ISBN. 93 – 80697 – 69 – 4.
  • 44 Gupta S.K., Dwivedi V.K., Soni D., Singh B., Paradigm Change in Indian Education for Sustainable Development of Society and Nation, International Conference on Recent Trends in Engineering, Technology & Management, 26 – 27 February 2011, BIET, Jhansi, Paper No. 147, PageNumbers 980 - 989, ISBN. 93 – 80697 – 69 – 4.
  • 45 Gupta S.K., Dwivedi V.K., Singh P., Gupta H., Present Scenario of Renewable Energy Resources and its Utilization in India, International Conference on Recent Trends in Engineering, Technology & Management, 26 – 27 February 2011, BIET, Jhansi, Paper No. 118, Page Numbers 754 - 761, ISBN: 93 – 80697 – 69 – 4.
  • 46 Dwivedi V.K., Gupta S.K., Finite Difference Method Analysis of Hybrid Bearing, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), 6 – 8 June 2011, S. V. NIT Surat, Gujarat, Paper No: DD 84, Page Numbers: 240 – 244.
  • 47 Islam A., Dwivedi V.K., Sharma A., Practical aspect of applying 5S methodology at a small-scale lock industry, International conference on recent advances in engineering and science (ICRAES-2020) AMU Aligarh, Jan 11-12, 2020. ISBN: 978-81-944663-1-4.
  • 48 Mahmood M. and Dwivedi V.K., Engineering workshop generate waste: A Plan for its management, International conference on recent advances in engineering and science (ICRAES-2020) AMU Aligarh, Jan 11-12, 2020. ISBN: 978-81-944663-1-4.
  • 49 Sharma A., Dwivedi V.K., Islam A., Sharma N., Design and analysis of gas turbine blade with variation in inlet and outlet angle, International conference on recent advances in engineering and science (ICRAES-2020) AMU Aligarh, Jan 11-12, 2020. ISBN: 978-81-944663-1-4.
  • 50 Sharma A., Dwivedi V.K., Singh Y.P., Recent development in friction stir welding: advancement in welding technology, International conference on recent advances in engineering and science (ICRAES-2020) AMU Aligarh, Jan 11-12, 2020. ISBN: 978-81-944663-1-4.
  • 51 Nizam A. and Dwivedi V.K., Review on natural antimicrobial packaging materials and bio degradable polymers, International conference on recent advances in engineering and science (ICRAES-2020) AMU Aligarh, Jan 11-12, 2020. ISBN: 978-81-944663-1-4.
  • 52 Alam P., Dwivedi V.K., Scope of solar power generation in Indian Prospective, International conference on recent advances in engineering and science (ICRAES-2020) AMU Aligarh, Jan 11-12, 2020. ISBN: 978-81-944663-1-4.

Non-Scopus Index National Conference Publication

  • 01 Dwivedi V.K., Analysis of groove dimensions and orientation effect on the characteristic performance parameters and stability of axial groove journal bearing, National Tribology Conference, IIT BHU Varanasi, Dec. 8-10.
  • 02 Tandan U., Jindal S., Sharma T.K., Gupta S.K., Dwivedi V.K., Computational Analysis of Flow Separation over Backward Facing Step, Indian Conference on Mechanics (INCAM – 2013), 04 – 06 July, 2013, IIT, Madras.
  • 03 Dwivedi V.K., Sharma D., Pathak P., Decision for Gate Limiter of a Hydro Power Plant Based on Fuzzy Logic, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 142.
  • 04 Dwivedi V.K., Tiwari M., Pathak P., Implementing Fuzzy Logic for Prediction of Power Generation of Small-Scale Vertical Axis Wind Turbine, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 143.
  • 05 Dwivedi V.K., Chahar A.S., Pathak P., Modeling of Shell and Tube Heat Exchanger for Fuzzy Proportional Derivative (FDP) control, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, 19-20 January 2013, paper id. 144.
  • 06 Sharma S., Gauri R., Gupta S.K., Dwivedi V.K., Electronics Industries in India: Challenges and Opportunities for Industrial Competitiveness, National Conference on Competitive Manufacturing: Strategic and Decision Support System, GLA University Mathura, 05 -06 Nov. 2011, Paper ID: 22.
  • 07 Gupta S.K., Dwivedi V.K., Soni D., Singh B., Modeling of Seqquent Depth Ratio of Hydraulic Jump in Horizontal Prismatic Channel using C Programming, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: DS 05, pp: 119 – 122.
  • 08 Soni D., Arya S., Gupta S.K., Dwivedi V.K., Small Hydro Power Potential and its Utilization in India and Climate Change, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: TR 07, pp: 113 – 118.
  • 09 Singh P., Gupta H., Gupta S.K., Dwivedi V.K., Conventional and non-conventional energy resources of India: present and future, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: TR 06, pp: 70 – 76.
  • 10 Sharma S., Gauri R., Gupta S.K., Dwivedi V.K., Renewable hydrogen production: an alternate approach towards sustainable development, National Conference on Emerging Trends in Mechanical Engineering, RBS College, Agra, 17 -18 Sept. 2011, Paper ID: TR 11, pp: 163 – 167.
  • 11 Dwivedi V.K., Chand S., Pandey K.N., Analysis of pressure and temperature variation using neural network back propagation learning method, 15-18 Dec., 2011, 26thIndian National Congress, The Institute of Engineers (India), Karnataka State Centre, Bangalore.
  • 12 Soni D., Singh B., Gupta S.K., Dwivedi V.K., Paradigm change in education for sustainable development, National Conference on Leading Change the Revolving Dynamics, 19 – 21 Feb., 2011, GLA University, Mathura, Paper Number: 35.
  • 13 Gupta S.K., Dwivedi V.K., Yadav A., Sharma A., Geothermal energy resources and utilization in India: An eco-friendly approach for sustainable development, National Conference on Eco-friendly Manufacturing for Sustainable Development, 19 – 21 Nov. 2010, GLA University, Mathura, Paper Number: 40.
  • 14 Gupta S.K., Dwivedi V.K., Yadav A., Sharma A., Geothermal Energy Resources in India: A Review, National Conference on Advance in Mechanical Engineering, Mechanical Engineering Section University Polytechnic, 27 – 28 November 2010, Aligarh Muslim University, Page Number 263-266, ISBN: 978-93-80697-33-8.
  • 15 Gupta S.K., Pandey S.N., Dwivedi V.K., Gautam A., An Eco – Friendly Renewable Energy Resource for Production of Electricity in Hilly Areas: Micro Hydro, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010, GLA University, Mathura, paper no. 12.
  • 16 Dwivedi V.K., Gupta S.K., Pandey S.N., A Study of Environmental Impact Due to Construction and Operation of Dam, National Conference on Eco friendly Manufacturing for Sustainable Development, November 19-21, 2010, GLA University, Mathura, paper no. 31.
  • 17 Soni D., Singh B., Gupta S.K., Dwivedi V.K., An Option for Energy Security and Environmental Sustainability: Wind Energy, National Conference on Recent Advances in Mechanical Engineering, BSA College of Engineering and Technology, Mathura, 25 – 26 March 2011, Page Number: 239 – 243, ISBN: 978 – 81 -906515 – 3 – 0.
  • 18 Soni D., Singh B., Gupta S.K., Dwivedi V.K., Wind Tunnel: A Research Tool, National Conference on Emerging Trends in Mechanical Engineering, Faculty of Engineering & Technology, 17 - 18 September 2011, RBS College Bichpuri, Agra, Paper ID – TR 10, Page Number: 156 – 162.
  • 19 Anand S., Sharma S., Gupta S.K., Dwivedi V.K., A Critical Review of Environmental Impact and Climate Change due to Construction and Operation of Dam, National Conference on Recent Advances in Mechanical Engineering, 25 – 26 March 2011, BSA College of Engineering and Technology, Mathura, Page Number: 234 – 238, ISBN: 978 – 81 -906515 – 3 – 0.
  • 20 Soni D., Singh B., Gupta S.K., Dwivedi V.K., An Option for Energy Security and Environmental Sustainability: Wind Energy, National Conference on Recent Advances in Mechanical Engineering, 25 – 26 March 2011, BSA College of Engineering and Technology, Mathura, Page Number: 239 – 243, ISBN: 978 – 81 -906515 – 3 – 0.
  • 21 Dwivedi V.K., Gupta S.K., Agrawal S.S., CFD Modeling of Flow Pattern of Rayleigh Step Bearing by Using Fluent 6.2, National Conference on Recent Advances in Mechanical Engineering, 25 – 26 March 2011, BSA College of Engineering and Technology, Mathura, Page Number: 20 – 24, ISBN: 978 – 81 -906515 – 3 – 0.

Invited Talk in Institute/Industry

  • 01 Delivered Invited speech on ‘Principle of Energy Management’ at Government Polytechnic Kotvan Mathura (U.P.), on 01/12/2018.
  • 02 Delivered Invited speech on ‘Use of Thermal energy for Food and Paints Industries’ at Government Polytechnic Kotvan Mathura (U.P.), on 27/01/2018.
  • 03 Delivered Invited speech on ‘Total Productive Maintenance (TPM)’ at VKS Construction, Sasan site (Sasan Power Limited), Waidhan, Singrauli (M.P) on 23/02/2018.
  • 04 Delivered Invited speech on ‘Innovative Teaching Methods’ in Faculty Development Program (FDP) at GLA University, Mathura during 22-24 July, 2014.
  • 05 Delivered Invited speech on ‘Innovative Teaching Methods’ in Faculty Development Program (FDP) at GLA University, Mathura during 26-28 Dec, 2016.

Training Courses, Technical-Learning-Evaluation, FDP

Sr. No. Programme Duration With dates Organized By
1 Short Term Training Program on "Recent Trends in Solar and Wind Energy" One week, 20 -24 JUNE, 2016 MANIT, Bhopal, M.P.
2 Short Term Training Programme on "Structural Integrity" One week, 16 -20 JUNE, 2014 MNNIT Allahabad, U.P
3 Teaching-Learning-Evaluation Technology Program " Mission 10x Workshop" One week, 29 – 02 April, 2010 WiPRO Technology and ISTE at GLA Institute of Technology, Mathura U.P.
4 Faculty Development Programme on "Recent Advances in Material Characterization" One week,23-28 May-2020 NITTTR, Chandigarh
5 Faculty Development Programme on " Materials Processing and Optimization" One week,06-07 July-2020 NITTTR, Chandigarh

Conference Organization

  • 01 Convener of International Conference on Simulation, Automation and Smart Manufacturing (SASM-2021) 20 -21 August, 2021

Professional Memberships

  • 01 Life member of NSFMFP IIT, Mumbai.
  • 02 Life member of ISTE, New Delhi.
  • 03 Life member of TSI Chennai.
  • 04 Life member of Institution of Engineers (AMIE) Kolkata.
  • 05 IEEE Member

Academic Memberships

  • 01 Member –Advisory Board of a NewGen IEDC (Innovation and Entrepreneurship Development Centre) under the aegis of the NSTEDB (National Science &Technology Entrepreneurship Development Board), Department of Science and Technology, Government of India.
  • 02 Member-Academic Council, GLA University Mathura(August-2010-2013, August 2016 to till date)
  • 03 Member-Curriculum Development Committee for UG and PG courses at GLA University Mathura (August 2010 to till date)
  • 04 Member-Board of Studies, Mechanical Engineering Department for UG and PG courses at GLA University Mathura (August 2010 to till date)

Academic Achievement and Awards

  • 01 Qualified GATE examination (2000, & 2002).
  • 02 Recipient of MHRD monthly scholarship during M. Tech Programme (2000 to Dec. 2001).
  • 03 Received best paper award during the National Conference on Eco – friendly Manufacturing for Sustainable Development held at GLA University Mathura during17 -19 November 2010.

Reviewer ship

  • 01 International Journals (14, SCI-9, Scopus-5): (1) Journal of Engineering Tribology (Part J) (SAGE)(2) Journal of Cleaner Production Elsevier (3) Sustainable Energy Technologies and Assessments, Elsevier(4) Journal of Nano Engineering and Nano Manufacturing (5) Springer Plus (6) Journal of Mechanical Engineering Science (Part C) (SAGE) (7) Sky Journal of Educational Research (8) International Journal of Research and Reviews in Education (9) Journal of Kind Saud University Engineering Science, Elsevier. (10) Tribology International, Elsevier, (11). Industrial Lubrication and Tribology, Emerald (12) Journal of computational and applied research in Mechanical Engineering (Scopus) (13) World Journal of Engineering (Scopus), Emerald (14) Desalination and Water Treatment.

Invited Speaker in Conference

  • 01 International conference on “Recent Trends of Teaching and Research in Applied Sciences & Engineering (ICASE-2020)” 22-23 DEC-2020

Research Interests

  • Green composite material
  • Thermal barrier coating
  • Friction stir welding
  • Tribological behaviour of materials

Experience in Guidance Research at Doctoral Level

Supervision of Ph.D. Theses: Awarded

  • Vikas Kumar Sharma on “Hydrodynamic Action at Interface during Mechanical Processing” on 26 Oct-2016
  • Shahbuddin, on “Experimental and analytical study on friction stir welding process on AA7075 aluminum alloys under different welding parameters” on 24 Dec 2019.
  • Priyanka Sharma on “Analysis of Thermally Sprayed Thermal Barrier Coatings subjected to High Temperature Loadings” on 25 Nov 2021)

Supervision of Ph.D. Theses: Continuing

  • Akash Sharma, in the area of “Effect of generated temperature during Friction Stir welding on the mechanical properties of weldment”.
  • Shailendra Kumar Verma, in the area of “Development and characterization of aluminium based green composite material using waste reinforcement”.
  • MVN Mohan, on properties prediction of carbon-carbon composite”.
  • Devendra Pratap Singh on Micro structural-metallurgical evaluation for the Al2O3 / AA6061cast composite fabricated under self-pouring temperature.
  • Ayush Trivedi on An Experimental investigation for the effect of processing parameters on Al/Si/Mg/SiC composed powder on perforated SS316L cladded Substrate.

Supervision of M. Tech. Theses: Awarded

  • Aditendra Singh Faujdar (2021) Optimization of EDM Machining Parameters for D-3 Tool Steel using Taguchi and ANOVA. (Declaration of result: 27/07/21)
  • Ojestez Tripathi (2021) Processing and Comparative Evaluation Of Al2O3/Mg/AA6061 Aluminum Metallic Foam. (Declaration of result: 27/07/21)
  • Rampal Singh (2020) Feasibility and Performance analysis of earth tube heat exchanger. (Declaration of result: 31/07/20)
  • Sameer Visvakerma (2020) Optimization of Process Parameters of Submerged Arc Welding by Taguchi Method. (Declaration of result: 31/07/20)
  • Piyush Sharma (2020) Development and Characterization of High Entropy Materials using Response Surface Methodology. (Declaration of result: 31/07/21)
  • Rajat Yadav (2020) Synthesis and Mechanical Behaviour of Ball-milled Agro-waste RHA and Eggshell Reinforced Composite Material. (Declaration of result: 31/07/20)
  • Shrawan Kumar (2020) Development and Characterization reinforced Eggshell and Al2O3 Hybrid Green Composite Material. (Declaration of result: 31/07/20)
  • Akash Sharma (2019) Experimental Study & Investigation of the Effect of different machining parameters during end milling of Aluminum alloy AA6062. (Declaration of result: 25/09/19)
  • Deepesh Sharma (2019) Comparative study of mechanical and microstructure properties of single pass & Double pass Friction Stir Welding of Aluminum Alloy AA6062. (Declaration of result: 25/09/19)
  • Vibha (2019) Characterization of Air Plasma sprayed thermal barrier coatings on inconel 718 (IN718) metallic substates subjected to thermal cycle shock loading with a comparison of Air-cooling medium. (Declaration of result: 25/09/19)
  • Adarsh Sharma (2018) Sintered Forging of Aluminum Powder using Modified Die (Declaration of result: 10/08/18)
  • Amarendra Rai (2017) Experimental Investigation of mechanical Properties of glass Wool Fiber Material Based on Epoxy Nanocomposite. (Declaration of result: 2/08/17)
  • Amit Kumar (2016) Molecular Dynamics simulation of Mechanical and Visco-elastic Performance of Defect free and Defective Carbon Nanotubes and their composites. (Declaration of result: 11/08/16)
  • Sakshi Tyagi (2016) Evaluation and Prediction of Mechanical Properties of High-Density Polyethylene Grade P5300 using Molecular Dynamics. (Declaration of result: 11/08/16)
  • Avinash Singh Chahar (2014) Computational Fluid Dynamics Analysis of Shell and Tube Heat Exchanger. (Declaration of result: 04/06/14)
  • Rahul Goswami (2014) Design and Simulation of a Low Speed Wind Tunnel Using Computational Fluid Dynamics. (Declaration of result: 04/06/14)

Teaching Experience

Teaching Interest

  • PG Teaching: Industrial Tribology, Interfacial Tribology, Computer Based Numerical Technique & Soft Computing.
  • UG Teaching: Basic Thermodynamics, Basic Mechanical Engineering, Power Plant Technology.

Academic Experiences

  • Professor, Mechanical Engineering Department, GLA University, Mathura (UP) from 1February-2022 to till date
  • Associate Professor, Mechanical Engineering Department, GLA University, Mathura (UP) from Sep-2011 to 31 January 2022 (11.5 Years)
  • Reader, Mechanical Engineering Department, GLAITM/GLA University, Mathura (UP) from 1 March-2007 to August-2011 (4.5 Years)
  • Lecturer, Mechanical Engineering Department GLAITM, Mathura (UP) from April-2002 to 28 Feb-2007 (5 Years)

Administrative Experiences

  • Chairperson(DRDC) from August 2015 to April 2017
  • Coordinator (M.Tech) from July-2012to Till Date
  • Observer (on behalf of CBSC) for UGC (NET), NEET & JEE (Main) Examination
  • Team Leader (Central Flying Squad) (Additional Charge) from 14.10.2016 to 15.08.2017.
  • Member (Grievance Cell)from 2013 to Till Date
  • Member (Consulting Cell)from 2019 to Till Date
  • Lab In charge of Computational Fluid Dynamics Lab
  • Member of Staff and student Welfare & campus life Improvement Committee of GLA University Mathura.
  • Member of Staff Examination Reforms Committee of GLA University Mathura.
  • Team Leader of Central Flying Squad of GLA University Mathura.
  • Member of Library Advisory Committee of GLA University Mathura.
  • Working as a Deputy Examination and Evaluation Co-ordinatorfromJuly2005 to June 2008.
  • Working as UPTU Counselling Deputy Co-ordinator during July 2006 to August 2009.
  • Working as a Member of Disciplinary Committee from July 2010 to till date.