GLA

Faculty

Dr. Manoj Kumar Agrawal

Associate Professor - Institute of Engineering & Technology

Department

Department of Mechanical Engineering

Experience

27.5 Years

Dr. Manoj Kumar Agrawal

Ph.D Thesis Supervised

2

Awarded/
Completed

1

Working

Postgraduate Thesis Supervised

4

Awarded/
Completed

Qualifications

  • Ph.D.

Publication

−
  • Ahmed M.A., Sadeq, Abdellatif M., Agrawal, Manoj Kumar, Shaaban, Shaaban M., Muhammad, Taseer (2026), "Numerical analysis of heat transfer enhancement in a straight tube heat exchanger in the presence of non-boiling air-water flow." Thermal Science and Engineering Progress (SCI-Q1), Article Open Access, 2026. https://doi.org/10.1016/j.tsep.2026.104752
  • Chauhdary, Sohaib Tahir, Agrawal, Manoj Kumar, Ooi, Jong Boon, Alamri, Saad, Elmonser, Hedi (2026), "Hybrid machine-learning optimization for enhancing energy and exergy efficiency of nanofluid-based thermal photovoltaic–thermoelectric cells: a case study in Lhasa, China." Applied Thermal Engineering (SCI-Q1), Article, 2026. https://doi.org/10.1016/j.applthermaleng.2026.131361
  • Chrouda, Amani, Alsenani, Theyab R., Alamri, Saad, Agrawal, Manoj Kumar, Sadeq, Abdellatif M. (2026), "An innovative green methanol synthesis through natural gas–biogas integration and post-combustion CO₂ capture; An integrated 4E evaluation, life cycle assessment and machine learning-driven multi-objective optimization." Applied Thermal Engineering (SCI-Q1), Article, 2026. https://doi.org/10.1016/j.applthermaleng.2026.131462
  • Singh, Nagendra, Agrawal, Manoj Kumar, JiaoJiao, Wang, Elumalai, Perumal, Prabhakar S. (2026), "Influence of Back Pressure on the Microstructure and Texture Characteristics of AA5083 During Equal Channel Angular Pressing Under Thermal Effect." Engineering Reports, Article Open Access, 2026. https://doi.org/10.1002/eng2.70755
  • Li, Long, Sadeq, Abdellatif M., Ayadi, Mohamed, Agrawal, Manoj Kumar, Ahmed M.A. (2026), "An innovative passive technique for thermo-hydraulic performance enhancement in a helical double tube heat exchanger: Effect of twisted elliptical cross section." International Communications in Heat and Mass Transfer (SCI-Q1), Article, 2026. https://doi.org/10.1016/j.icheatmasstransfer.2026.110664
  • Alamri, Saad, Sadeq, Abdellatif M., Agrawal, Manoj Kumar, Chauhdary, Sohaib Tahir, Ahmed M.A. (2026), "Hybrid Biomass-LNG powered multigeneration multi-effect desalination system for sustainable freshwater, energy and hydrogen production: Design and optimization using 4E analysis and machine learning-based evaluation." Desalination (SCI-Q1), Article, 2026. https://doi.org/10.1016/j.desal.2025.119785
  • Shaersaikai, Wulaer, Jia, Tuhuo, Sadeq, Abdellatif M., Agrawal, Mnaoj Kumar, Muhammad, Taseer (2025), "Modeling and thermoeconomic analysis of new polygeneration system based on geothermal energy with sea water desalination and hydrogen production." Desalination (SCI-Q1), Article Open Access, 2025. https://doi.org/10.1016/j.desal.2025.119010
  • Li, Zibin, Zhang, Lizhen, Chauhdary, Sohaib Tahir, Agrawal, Manoj Kumar, Muhammad, Taseer (2025), "Eco-friendly energy generation model of a tri-generation system using renewable biogas fuel, Brayton cycle, and Rankine cycles for sustainable electricity, heating, and cooling production." Energy, Article, 2025. https://doi.org/10.1016/j.energy.2025.136893
  • Zhou, Dongming, Alshahrani, Mohammad Y., Awan, Ahmed Bilal, Agrawal, Manoj Kumar, Chauhdary, Sohaib Tahir (2025), "Thermo-economic-environmental assessment of a novel polygeneration plant based on multi-heat recovery from Brayton cycle." Energy, Article, 2025. https://doi.org/10.1016/j.energy.2025.136251
  • Bhojak, Vishal, Jain, Jinesh Kumar, Singhal, Tejendra Singh, Saxena, Kuldeep Kumar, Prakash, Chander, Agrawal, Manoj Kumar (2025), "FRICTION STIR PROCESSING AND CLADDING: AN INNOVATIVE SURFACE ENGINEERING TECHNIQUE TO TAILOR MAGNESIUM-BASED ALLOYS FOR BIOMEDICAL IMPLANTS." Surface Review and Letters, Article, 2025. https://doi.org/10.1142/S0218625X23400073
  • Elsayed, Mahdy, Alsenani, Theyab R., Shah, Nehad Ali, Agrawal, Manoj Kumar, Elmonser, Hedi (2025), "Enhancing double-tube thermal energy storage during solidification process: Effects of inner tube aspect ratio and its positioning." Journal of Energy Storage (SCI-Q1), Article, 2025. https://doi.org/10.1016/j.est.2025.116174
  • Wang, Mingsen, Ahmad, Sayed Fayaz, Agrawal, Manoj Kumar, Ahmad Bani Ahmad, Ahmad Yahiya, Awan, Ahmed Bilal (2025), "Thermodynamic, economic, and environmental footprint assessments and optimization of an innovative biogas-driven heat integration network, producing power, cooling, and heating." Energy (SCI, Q1), Article, 2025. https://doi.org/10.1016/j.energy.2025.135379
  • Jha, Panchanand, Shaikshavali G., Shankar, M. Gowri, Ram, M. Dinesh Sai, Agrawal, Manoj Kumar, Bandhu, Din (2025), "A HYBRID ENSEMBLE LEARNING MODEL FOR EVALUATING THE SURFACE ROUGHNESS OF AZ91 ALLOY DURING THE END MILLING OPERATION." Surface Review and Letters, Article, 2025. https://doi.org/10.1142/S0218625X23400012
  • Dikshit, Mithilesh K., Pathak, Vimal Kumar, Bhavani B., Agrawal, Manoj Kumar, Malik, Vinayak (2025), "Optimization of cutting forces in high-speed ball-end milling using fuzzy-based desirability function approach." International Journal on Interactive Design and Manufacturing, Article, 2025. https://doi.org/10.1007/s12008-023-01633-w
  • Mansoureh Alizadeh Balderlou, Manoj Kumar Agrawal, B. Nageswara Rao, Atef El Jery, Basem Al Alwan, Abdellatif M. Sadeq (2024), "Influence of twist ratio of twisted tape turbulator on thermal and second law efficiency of spiral tube." Results in Engineering, Volume 24, December 2024, Article number 103489, ISSN: 25901230. https://doi.org/10.1016/j.rineng.2024.103489
  • Agrawal, B.N., Singh, C., Singh, M.P., Agrawal, M.K. (2024), "Comparative CFD Analysis of Different Shape Microchannel Heat Sinks." Lecture Notes in Mechanical Engineering, Pages 55–73, 2024 2nd Biennial International Symposium on Fluids and Thermal Engineering, FLUTE 2023, Noida, 20 July 2023 through 21 July 2023, Code 315459, ISSN: 21954356, ISBN: 978-981-97-2480-2. https://doi.org/10.1007/978-981-97-2481-9_5
  • Elsayed M., Abou Houran M., Agrawal, M.K., Shah N.A., Zhang L. (2024), "A novel approach to improve double-tube thermal energy storage: Impacts of inner tube twisting and its location." Journal of Energy Storage (SCI-Q1), Volume 99, 10 October 2024, Article number 113337, ISSN: 2352152X. https://doi.org/10.1016/j.est.2024.113337
  • Khamees, E.J., Saeed, I.A., Abdulazeem, L., Agrawal Manoj Kumar, Mohammed, K.A., Sharma, S. (2024), "Generation and Investigation of FE2O3 Nanoparticles' Optical Properties and Antibacterial Activity Using Pulsed Laser Ablation in Deionized Water." International Journal of Nanoscience, 23(2), 2350066, Volume 23, Issue 2, 1 April 2024. https://doi.org/10.1142/S0219581X23500667
  • Elsayed, M., Sultan, M., Riaz, F., (...), Agrawal, M.K., Nageswara Rao, B., Zhang, L. (2024), "A case study on effect of twisting technique on heat transfer characteristics in a twisted oval helical tube." Case Studies in Thermal Engineering, Volume 59, July 2024, Article number 104479, ISSN: 2214157X. https://doi.org/10.1016/j.csite.2024.104479
  • Zhang, L., Ahmad, S.F., Nutakki, T.U.K., (...), Agrawal, M.K., Chauhdary, S.T., Youshanlouei, H.M. (2024), "Charging an inclined PCM storage exposed to time-varying solar radiation: Latent heat thermal energy storage." Journal of Energy Storage, Volume 90, 15 June 2024, Article number 111911, ISSN: 2352152X. https://doi.org/10.1016/j.est.2024.111911
  • Singh, N., Agrawal, M.K. (2024), "Effect of equal channel angular pressing on strain deformation behavior of ultrafine grained during low temperature super plasticity of AA5083." Results in Engineering, Volume 22, June 2024, Article number 102221, ISSN: 25901230. https://doi.org/10.1016/j.rineng.2024.102221
  • Prasanthi, P.P., Srinag, T., Madhav, V.V.V., (...), Saxena, K.K., Agrawal, M.K., Navajyoth, B. (2024), "Prediction of pipe geometry influenced by various suction pressure." Indian Journal of Engineering and Materials Sciences, 31(1), pp. 76–83, February 2024, ISSN: 09714588. https://doi.org/10.56042/ijems.v31i1.586
  • Tan, H., Bo, L., Nutakki, Agrawal, M.K., T.U.K., Shah, NA, Ji, T. (2024), "A comprehensive multi-variable approach for evaluating the feasibility of integration a novel heat recovery model into a gas turbine power plant, producing electricity, heat, and methanol." Energy, 296, 131145.
  • Zhao, T., Ahmad, S.F., Agrawal, M.K., Shah, N.A., Gao, X. (2024), "Design and thermo-enviro-economic analyses of a novel thermal design process for a CCHP-desalination application using LNG regasification integrated with a gas turbine power plant." Energy, 295, 131003.
  • Faisal, Shah, Abbas, Amir, Eladeb, Aboulbaba, Agrawal, Manoj Kumar (2024), "Innovative modification process of a natural gas power plant using self-sufficient waste heat recovery and flue gas utilization for a CCHP-methanol generation application: A comprehensive multi-variable feasibility study." Journal of Process Safety and Environmental Protection, Volume 183, Pages 801–820, March 2024, ISSN: 09575820. https://doi.org/10.1016/j.psep.2024.01.022
  • Nutakki, T.U.K., Agrawal, M.K., Tahir Chauhdary, S., (...), Muhammad, T., Xiao, F. (2024), "Thermo-economic-environmental analysis of a sustainable heat integration design for biomass-fueled power plant using integration of CCHP and sweater desalination application." Desalination, Volume 577, 18 May 2024, Article number 117404, ISSN: 00119164. https://doi.org/10.1016/j.desal.2024.117404
  • Faisal, S., Rao, B.N., Abou Houran, M.K., Agrawal, Muhammad, T., Ji, T. (2024), "Multi-aspect analysis of an innovative environmentally friendly process integrated into a gas turbine power plant using a multi-heat recovery approach." Desalination, Volume 576, 9 May 2024, Article number 117365, ISSN: 00119164. https://doi.org/10.1016/j.desal.2024.117365
  • Tian, H., Chen, X., Ahmad, S.F., M. K. Agrawal, Shah, N.A., Su, Q. (2024), "Modeling and 4E analysis of a new combined cooling, heating, and power energy system based on biogas combustion and hot oil for heat supply." Journal of Process Safety and Environmental Protection, 184, pp. 1484–1501, April 2024, ISSN: 09575820. https://doi.org/10.1016/j.psep.2024.02.074
  • Liu, C., Hsu, C.-Y., Agrawal, M.K., (...), Tahir Chauhdary, S., Chi, F. (2024), "Design and thermo-enviro-economic analyses of an innovative environmentally friendly trigeneration process fueled by biomass feedstock integrated with a post-combustion CO2 capture unit." Journal of Cleaner Production, 443, 141137, ISSN: 09596526, Volume 443, 1 March 2024. https://doi.org/10.1016/j.jclepro.2024.141137
  • Xu, Z., Huang, J., Muhammad, T., M. K. Agrawal, (...), Ooi, J.B., Xiao, F. (2024), "Design and comprehensive thermo-enviro-economic assessment of an innovative polygeneration system using biomass fuel and LNG regasification: A CCHP-thermally desalination application." Journal of Process Safety and Environmental Protection, 183, pp. 925–944, March 2024, ISSN: 09575820. https://doi.org/10.1016/j.psep.2024.01.040
  • Kumar, R., Maurya, S.K., Choubey, M., M. K. Agrawal, Saxena, A., Agrawal, M. (2024), "Optimization and empirical studies of riser design in sand casting process using different mould properties." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01725-7
  • Mogul, Y.I., Quadros, J.D., Khan, S.A., M. K. Agrawal, (...), Saleel, C.A., Saxena, A. (2024), "Statistical modelling of depth milling in Ti-6AL4V using abrasive water jet machining." Journal of Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, ISSN: 09544089, Open Access, 2024. https://doi.org/10.1177/09544089231223789
  • Liang, P., Guo, Y., Nutakki, T.U.K., Agrawal M. K., (...), Bani Ahmad, A.Y.A., Qin, M. (2024), "Comprehensive assessment and sustainability improvement of a natural gas power plant utilizing an environmentally friendly combined cooling heating and power-desalination arrangement." Journal of Cleaner Production, 436, 140387, Volume 436, 10 January 2024. https://doi.org/10.1016/j.jclepro.2023.140387
  • Liang, P., Guo, Y., Chauhdary, S.T., Agrawal M. K., (...), Ifseisi, A.A., Ji, T. (2024), "Sustainable development and multi-aspect analysis of a novel polygeneration system using biogas upgrading and LNG regasification processes, producing power, heating, fresh water and liquid CO2." Journal of Process Safety and Environmental Protection, 183, pp. 417–436, March 2024, ISSN: 09575820. https://doi.org/10.1016/j.psep.2024.01.003
  • Hsu, C.-Y., Ghfar, A.A., Rao, B.N., Agrawal M. K., (...), Shah, N.A., Gao, X. (2024), "An environmentally friendly process design of an innovative CCHP-desalination system combined with a geothermal cycle and LNG regasification unit." Desalination, 574, 117237, ISSN: 00119164. https://doi.org/10.1016/j.desal.2023.117237
  • Alshammari, T.O., Ahmad, S.F., Abou Houran, M.K., Agrawal, M.K., Albani, A., Youshanlouei, H.M. (2023), "Thermal energy simulation of the building with heating tube embedded in the wall in the presence of different PCM materials." Journal of Energy Storage, 73, 109134 (SCI, Q1, IF: 9.0), ISSN: 2352152X. https://doi.org/10.1016/j.est.2023.109134
  • Zhang, L., Asadollahzadeh, M., Seikh, A.H., Agrawal, M. K., Minzha, W. (2023), "Proposal and comprehensive study of an integrated polygeneration process relying on landfill gas, renewable hydrogen, and binary geothermal cycle." Separation and Purification Technology, 327, 124897 (SCI, Q1, IF: 8.6), ISSN: 13835866. https://doi.org/10.1016/j.seppur.2023.124897
  • Song, Y., Ahmad, S.F., Abou Houran, M.K., Agrawal, Albani, A., Su, Q. (2023), "Multi-variable study of a novel multigeneration system using biogas separation unit and LNG cold energy utilization, producing electricity, cooling, heat, fresh water, liquid CO2, biomethane, and methanol." Journal of Process Safety and Environmental Protection, 180, pp. 616–638 (SCI, Q1), ISSN: 09575820. https://doi.org/10.1016/j.psep.2023.10.023
  • Abou Houran, M., Ahmad, S.F., Nutakki, T.U.K., M. K. Agrawal, Albani, A., Xie, S. (2023), "Numerical simulation and 4E analysis of a steam methane reforming-based multi heat recovery process, producing electricity, methanol, fresh water, heating, and coolant." Journal of Process Safety and Environmental Protection, 180, pp. 511–534 (SCI, Q1), ISSN: 09575820. https://doi.org/10.1016/j.psep.2023.10.011
  • Pulla, B.P., Nutakki, T.U.K., Albani, A., M. K. Agrawal, Begum, M.Y., Han, W. (2023), "Comprehensive technical study of a novel polygeneration arrangement using natural gas power plant and geothermal energy for producing electricity, heat, fresh water, and methanol." Journal of Process Safety and Environmental Protection, 180, pp. 98–121 (SCI, Q1), ISSN: 09575820. https://doi.org/10.1016/j.psep.2023.10.001
  • Gao, J., He, N., Rathan, A., Agrawal, M.K., Mohanty, H. (2023), "Annealing-induced changes in wear resistance and nano-mechanical properties of Cu-Zr metallic glass thin films." Materials Research Express, 10(10), 105202, ISSN: 20531591. https://doi.org/10.1088/2053-1591/acfd04
  • Fu, D., Hu, G., Agrawal, M. K., (...), Abuhussain, M., Alsenani, T.R. (2023), "Multi-criteria optimization of a renewable combined heat and power system using response surface methodology." Journal of Process Safety and Environmental Protection, 176, pp. 898–917, ISSN: 09575820. https://doi.org/10.1016/j.psep.2023.06.028
  • Miao, X., Riaz, F., Alotaibi, B., Agrawal M.K., (...), Balderlou, M.A., Lin, Q. (2023), "Performance enhancement of latent heat thermal energy storage system by using spiral fins in phase change material solidification process." Journal of Process Safety and Environmental Protection, 176, pp. 568–579, ISSN: 09575820. https://doi.org/10.1016/j.psep.2023.05.102
  • Guedri, K., Riaz, F., Fadhl, B.M., Agrawal M. K., (...), Makhdoum, B.M., Mehdizadeh Youshanlouei, H. (2023), "Use of Nano-Encapsulated phase change material mixed with water for natural convection cooling in combination with nickel foam." Journal of Thermal Science and Engineering Progress, 42, 101934, ISSN: 24519049. https://doi.org/10.1016/j.tsep.2023.101934
  • Abdulkareem, S.K., Ajeel, S.A., Shaghnab, M.L., (...), Saxsena, K.K., Agrawal, M.K. (2023), "Plasma Sputtering of Nano-CaTiO3 Thin Film Applied for Surface Modification of Co-Cr Alloy." International Journal of Nanoscience, 22(3), 2350020, ISSN: 0219581X. https://doi.org/10.1142/S0219581X23500205
  • Yang, X., Lin, Q., Singh, P., Agrawal M. K., (...), Xia, G.L., Abdelmohimen, M.A.H. (2023), "Evaluating the proficiency of a novel solar evacuated tube collector." Applied Thermal Engineering, 226, 120311, ISSN: 13594311. https://doi.org/10.1016/j.applthermaleng.2023.120311
  • Dikshit, M.K., Singh, S., Pathak, V.K., Agrawal M. K., (...), Salem, K.H., Khan, M.I. (2023), "Surface characteristics optimization of biocompatible Ti6Al4V with RCCD and NSGA II using die sinking EDM." Journal of Materials Research and Technology, 24, pp. 223–235, ISSN: 22387854. https://doi.org/10.1016/j.jmrt.2023.03.005
  • Phani Prasanthi, P., Ram, N.R., Madhav, V.V.V., Agrawal M. K., (...), Salem, K.H., Abdullaeva, B.S. (2023), "Tensile Behaviour of Natural Polymer Composite Materials at Ambient and Elevated Temperatures." Indian Journal of Engineering and Materials Sciences, 30(2), pp. 331–337, ISSN: 09714588. https://doi.org/10.56042/ijems.v30i2.609
  • Kaur, J., Saxena, A., Reddy, V.P., (...), Agrawal, M., Saxena, K.K. (2023), "Lepidium Didymium Plant Extract as Eco-Friendly Corrosion Inhibitor for Steel in Acidic Medium." Indian Journal of Engineering and Materials Sciences, 30(2), pp. 256–264, ISSN: 09714588. https://doi.org/10.56042/ijems.v30i2.1627
  • Hashmi, A.W., Mali, H.S., Meena, A., Agrawal M. K., (...), Valerga Puerta, A.P., Khan, M.I. (2023), "A comprehensive review on surface post-treatments for freeform surfaces of bio-implants." Journal of Materials Research and Technology, 23, pp. 4866–4908, ISSN: 22387854. https://doi.org/10.1016/j.jmrt.2023.02.007
  • Dikshit, M.K., Srinivas, R., Panchal, S., Agrawal M. K., (...), Verma, A., Pathak, V.K. (2023), "Experimental investigation on the mechanical properties of resistance seam welding of thin sheet." Journal of Adhesion Science and Technology, ISSN: 01694243. https://doi.org/10.1080/01694243.2023.2290374
  • Dikshit, M.K., Pathak, V.K., Bhavani, B., Agrawal M. K., (...), Malik, V., Saxena, A. (2023), "Optimization of cutting forces in high-speed ball-end milling using fuzzy-based desirability function approach." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01633-w
  • Kumar, V., Sehgal, S., Rathan, A., Agrawal, M. K., Abdullaev, S.S. (2023), "Parametric investigation into the mechanical characteristics of dissimilar steel joints produced using SMHH-based joining technology." Journal of Adhesion Science and Technology, ISSN: 01694243. https://doi.org/10.1080/01694243.2023.2267273
  • Srivastava, A.K., Pathak, V.K., Singh, R., (...), Agrawal, M., Saxena, A. (2023), "A hierarchical multiscale modelling approach to characterize the elastic response of layered graphene-reinforced 4D-carbon carbon composite." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01553-9
  • Makhesana, M.A., Bagga, P.J., Agrawal, M.K., (...), Patel, K.M., Dwivedi, Y.D. (2023), "Investigation on the effect of process parameters and optimization using GRA under biodegradable oil based MQL in machining." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01459-6
  • Reddy, K.S.K., Kannan, M., Karthikeyan, R., Agrawal, M.K., Kumar, S. (2023), "Evaluation of mechanical and thermal properties of Al 7475–CSA–graphite hybrid metal matrix composites." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01401-w
  • Patel, A.K., Rajput, S.P.S., Kumar, R., (...), Agrawal, M.K., Kadhim, I.K. (2023), "Experimental and numerical investigation of metal oxide base nano particles for VCRS test rig." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01408-3
  • Phani Prasanthi, P., Mandava, J.M., Venu Madhav, V.V., (...), Kadhim, I.K., Agrawal, M.K. (2023), "Computational analysis for flexural response of composite laminates using finite element method." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01356-y
  • Gugulothu, B., Bharadwaja, K., Vijayakumar, S., (...), Anusha, P., Agrawal, M.K. (2023), "Modeling and parametric optimization of electrical discharge machining on casted composite using central composite design." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01323-7
  • Kumar Yadav, A., Agrawal, M.K., Saxena, K.K., Yelamasetti, B. (2023), "Prediction of thermal fields and stresses developed in GTAW dissimilar weldments of AA 5083 and AA 6082." Materials Today: Proceedings, ISSN: 22147853. https://doi.org/10.1016/j.matpr.2023.03.174
  • Abdulameer, Z.T., Hasan, N.H.J.A., Jarad, A.N., (...), Prakash, C., Agrawal, M.K. (2023), "Preparation and characterisation of pure and Ni doped ZnO nanorods." Advances in Materials and Processing Technologies, ISSN: 2374068X. https://doi.org/10.1080/2374068X.2023.2190673
  • Naik, A.K., Roshan, R., Hasan, N.H.J.A., Agrawal M. K., (...), Mohammed, K.A., Prakash, C. (2023), "Effect of EN ratio on bead profile and mechanical properties of MC 600 steel in submerged arc welding." Advances in Materials and Processing Technologies, ISSN: 2374068X. https://doi.org/10.1080/2374068X.2023.2192325
  • Bhojak, V., Jain, J.K., Singhal, T.S., (...), Agrawal, M.K., Malik, V. (2023), "Friction stir processing and cladding: An innovative surface engineering technique to tailor magnesium-based alloys for biomedical implants." Surface Review and Letters, 2340007, ISSN: 0218625X. https://doi.org/10.1142/S0218625X23400073
  • Yadav, I.J., Chauhan, B.S., Singh, P., Agrawal, M.K. (2023), "Granular material drying and energy analysis of a scaled-up rotating fluidized bed dryer of fixed geometry." Materials Today: Proceedings, ISSN: 22147853. https://doi.org/10.1016/j.matpr.2023.02.122
  • Jha, P., Shaikshavali, G., Shankar, M.G., (...), Buddhi, D., Agrawal, M.K. (2023), "A Hybrid Ensemble Learning Model For Evaluating The Surface Roughness Of AZ91 Alloy During The End Milling Operation." Surface Review and Letters, 2340001, ISSN: 0218625X. https://doi.org/10.1142/S0218625X23400012
  • Yadav, A.K., Agrawal, M.K., Saxena, K.K., Yelamasetti, B. (2023), "Effect of GTAW process parameters on weld characteristics and microstructural studies of dissimilar welded joints of AA5083 and AA6082: optimization technique." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01230-x
  • Yadav, A.K., Agrawal, M.K., Saxena, K.K., Yelamasetti, B. (2023), "Numerical simulation and experimental residual stress analyses of dissimilar GTA weldments of AA 5083 and AA 6082." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01216-9
  • Agrawal, M.K., Singh, P., Yadav, A.K. (2023), "Experimental study of a rapid rate biofuel production in a cyclone type reactor." Materials Today: Proceedings, ISSN: 22147853. https://doi.org/10.1016/j.matpr.2023.01.313
  • Agrawal, M. K., Singh, P., Mishra, P., (...), Kumar, S., Kumar, G. (2023), "A brief review on the perspective of a newer incremental sheet forming technique and its usefulness." Advances in Materials and Processing Technologies, ISSN: 2374068X. https://doi.org/10.1080/2374068X.2023.2168288
  • Singh, N., Agrawal, M.K., Saxena, K.K., Kumar, S., Prakash, C. (2023), "Advancement and influence of designing of ECAP on deformation and microstructure properties of the AA5083 under thermal effects." International Journal on Interactive Design and Manufacturing, ISSN: 19552513. https://doi.org/10.1007/s12008-023-01213-y
  • Vemanaboina, H., Babu, M.M., Prerana, I.C., (...), Eldin, S.M., Agrawal, M.K. (2023), "Evaluation of residual stresses in CO2 laser beam welding of SS316L weldments using FEA." Materials Research Express, 10(1), 016509, ISSN: 20531591, Open Access, January 2023. https://doi.org/10.1088/2053-1591/acb0b5
  • Namdev, A., Telang, A., Purohit, R., Agrawal, M.K. (2022), "An experimental assessment of abrasive wear behavior of GNP/Carbon fiber/epoxy hybrid composites." Indian Journal of Engineering and Materials Sciences, 29(6), pp. 777–785.
  • Pawar, K.S., Bagha, A.K., Bahl, S., Agrawal, M.K. (2022), "Experimental investigation for the dynamic characteristics of short natural fiber reinforced composite materials." Indian Journal of Engineering and Materials Sciences, 29(3), pp. 366–377.
  • Nagendra Singh, Manoj Kumar Agrawal, Sanjeev Kumar Verma (2022), "Design of Die and Parameters for Grain Refinement of AA5XXX Series Through Equal Channel Angular Pressing: An Overview." International Advanced Research Journal in Science, Engineering and Technology, Vol. 9, Issue 1, January 2022, ISSN (O): 2393-8021, ISSN (P): 2394-1588. https://doi.org/10.17148/IARJSET.2022.9141
  • Nagendra Singh, Manoj Kumar Agrawal, Sanjeev Kumar Verma, Ashish Kumar Tiwari (2022), "A Review on Effect of Stress and Strain Distribution on the AA5083 with Respect to Different Channel Angle of ECAP." International Research Journal on Advanced Science Hub, Vol. 04, Issue 03, March 2022, ISSN: 2582-4376. http://dx.doi.org/10.47392/irjash.2022.013
  • Agrawal Manoj Kumar & Srivastava Shashank (2021), "Enhancing the Quality of Diagnosis in Health Care Industries by Imputation of “Missing Data” Using “Data Mining”." Lecture Notes in Mechanical Engineering, Pages 357–366, 2021 Congress on Advances in Materials Science and Engineering, CAMSE 2020, Virtual, Online, 25 December 2020 through 27 December 2020, ISSN: 21954356, ISBN: 978-981-16-0941-1. https://doi.org/10.1007/978-981-16-0942-8_35
  • Singh Ravindra Pratap & Agrawal Manoj (2021), "Detection and identification of natural disasters in RC framed considerate structured building with and without infill." Materials Today: Proceedings, Volume 45, Pages 3207–3212, 2021. https://doi.org/10.1016/j.matpr.2020.12.374
  • Sharma Vikash Kumar & Agrawal Manoj Kumar (2021), "A historical perspective of liposomes-a bio nanomaterial." Materials Today: Proceedings, Volume 45, Pages 2963–2966, 2021. https://doi.org/10.1016/j.matpr.2020.11.952
  • Agrawal Manoj Kumar & Singh Rudra Pratap (2021), "Effect of external magnetic field on impact strength and hardness of weld of shielded metal arc welding process." Materials Today: Proceedings, Volume 45, Pages 3638–3641, 2021. https://doi.org/10.1016/j.matpr.2020.12.1219
  • Sharma Vikas & Agrawal Manoj (2021), "A novel approach for natural frequency hallow shift calculation using non-contact impulse method." Materials Today: Proceedings, Volume 45, Pages 3526–3533, 2021. https://doi.org/10.1016/j.matpr.2020.12.968
  • Singh Rudra Pratap & Agrawal Manoj Kumar (2021), "Effect of welding current on the dimensions of bead in tungsten inert gas welding process." Materials Today: Proceedings, Volume 45, Pages 3235–3239, 2021. https://doi.org/10.1016/j.matpr.2020.12.382
  • Agrawal Manoj Kumar & Singh Rudra Pratap (2021), "Risk and uncertainty analysis of complex supply networks using heuristics simulation techniques." Materials Today: Proceedings, Volume 45, Pages 2967–2971, 2021. https://doi.org/10.1016/j.matpr.2020.11.953
  • Singh Rudra Pratap & Agrawal Manoj Kumar (2021), "Influence of process parameters on depth of penetration of tungsten inert gas welded joints for low carbon steel AISI 1010 plates." Materials Today: Proceedings, Volume 45, Pages 3656–3661, 2021. https://doi.org/10.1016/j.matpr.2021.01.032
  • Manoj Kumar Agrawal & Pankaj Sonia (2021), "A Mini Review: Hybridized Electric Discharge Machining." IOP Conference Series: Materials Science and Engineering, Volume 1116, International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020), 18th–19th December 2020, Mathura, India, Citation: Manoj Kumar Agrawal and Pankaj Sonia 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1116 012079.
  • Manoj Kumar Agrawal (2021), "Applications of Just in Time in Manufacturing Industry." IOP Conference Series: Materials Science and Engineering, Volume 1116, International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020), 18th–19th December 2020, Mathura, India, Citation: Manoj Kumar Agrawal 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1116 012085.
  • Trivendra Sengar, Manoj Kumar Agrawal and Tarun Grover (2021), "Performance Enhancement and Analysis of Shell and Tube Type Heat Exchanger." IOP Conference Series: Materials Science and Engineering, Volume 1116, International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020), 18th–19th December 2020, Mathura, India, Citation: Trivendra Sengar et al. 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1116 012104.
  • Rajkumar Sharma, Piyush Singhal and Manoj Kumar Agrawal (2021), "Application of Monte-Carlo Simulations in Estimation of Pi." IOP Conference Series: Materials Science and Engineering, Volume 1116, International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020), 18th–19th December 2020, Mathura, India, Citation: Rajkumar Sharma et al. 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1116 012130.
  • Rajkumar Sharma, Manoj Kumar Agrawal, Piyush Singhal and Deepak Agrawal (2021), "Analysis of modified time series prediction techniques: A case study with bakery industry." IOP Conference Series: Materials Science and Engineering, Volume 1116, International Conference on Futuristic and Sustainable Aspects in Engineering and Technology (FSAET 2020), 18th–19th December 2020, Mathura, India, Citation: Rajkumar Sharma et al. 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1116 012205.
  • Manoj Kumar Agrawal (2020), "Utilization of Domestic Waste: A Lean Production Approach." International Journal of Advance Science and Technology (IJAST), Vol. 29, No. 10S, 2020, pp. 3172–3177.
  • Manoj Kumar Agrawal (2020), "Conceptualization of Green Technology: An approach to Enrichment of Environment & Industrialization." International Journal of Advance Science and Technology (IJAST), Vol. 29, No. 10S, 2020, pp. 3178–3185.
  • Manoj Kumar Agrawal (2020), "Revisiting of Frugal Manufacturing System." International Journal of Advance Science and Technology (IJAST), Vol. 29, No. 10S, 2020, pp. 6173–6181.
  • Manoj Kumar Agrawal (2020), "Jit Manufacturing System: Some Requirements For Implementation And Pay Off." International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), ISSN (P): 2249–6890; ISSN(E): 2249–8001, Vol. 10, Special Issue, June 2020, pp. 205–211.
  • Manoj Kumar Agrawal & Ashutosh Pratap Singh (2020), "Comparative study of the application of Forge micro-alloy and As-Cast micro-alloy steel in automotive application." International Journal of Advance Science and Technology (IJAST), Vol. 29, No. 10S, 2020, pp. 3520–3526.
  • Manoj Kumar Agrawal & Pankaj Sonia (2020), "Hybridization Electric Discharge Machining: A review." International Journal of Advance Science and Technology (IJAST), Vol. 29, No. 10S, 2020, pp. 6166–6172.

Conferences / Seminar / Workshop

+

International Conferences

2025
  • Agrawal, Manoj Kumar, Ramacharyulu, Doddipatle Atchuta, Sobti, Rajeev, Kalra, Ravi, Dhamija, Koushal (2025), "Investigating the effects of grain size and microstructure on high strain rate deformation of materials" Published in AIP Conference Proceedings, Conference Paper, 2025. https://doi.org/10.1063/5.0262201
  • Agrawal, Manoj Kumar, Ramya, Nanna Sri, Gautam, Praveen, Parashar, Ashish Kumar, Sobti, Rajeev (2025), "High strain rate deformation of additively manufactured materials: Characterization and modeling" Published in AIP Conference Proceedings, Conference Paper, 2025. https://doi.org/10.1063/5.0262200
2024
  • Singh, N., Agrawal, M.K. (2024), "Mechanical characteristics and crystallographic texture of AA5083 during Equal Channel Angular Pressing Technique" E3S Web of Conferences, 505, 01002, Open Access, Volume 505, 25 March 2024, Article number 01002, 3rd International Conference on Applied Research and Engineering, ICARAE 2023, Cape Town, 17 November 2023 through 19 November 2023, Code 198581, ISSN: 25550403. https://doi.org/10.1051/e3sconf/202450501002
2023
  • Agrawal, M., Prasad, V.V.S.H., Nijhawan, G., (...), Rajalakshmi, B., Dwivedi, S.P. (2024), "A Comprehensive Review of Electron Microscopy in Materials Science: Technological Advances and Applications" E3S Web of Conferences, 505, 01029, Open Access, Volume 505, 25 March 2024, Article number 01029, 3rd International Conference on Applied Research and Engineering, ICARAE 2023, Cape Town, 17 November 2023 through 19 November 2023, Code 198581, ISSN: 25550403. https://doi.org/10.1051/e3sconf/202450501029
  • Agrawal, M., Antham, C.P., Jalal, S.S., (...), Rajalakshmi, B., Dwivedi, S.P. (2024), "Innovative Advances and Prospects in In Situ Materials Testing: A Comprehensive Review" E3S Web of Conferences, 505, 01031, Open Access, Volume 505, 25 March 2024, Article number 01031, 3rd International Conference on Applied Research and Engineering, ICARAE 2023, Cape Town, 17 November 2023 through 19 November 2023, Code 198581, ISSN: 25550403. https://doi.org/10.1051/e3sconf/202450501031
  • Singh, N., Agrawal, M. K., Verma, S.K., Tiwari, A.K. (2023), "Impact design of die parameters on Severe plastic deformation during Equal channel angular pressing: An overview" E3S Web of Conferences, 430, 01255, ISSN: 25550403, Open Access, Volume 430, 6 October 2023, Article number 01255, 15th International Conference on Materials Processing and Characterization, ICMPC 2023, Newcastle, 5 September 2023 through 8 September 2023, Code 193310. https://doi.org/10.1051/e3sconf/202343001255
  • Agrawal, M. K., Sree, V.B., Maan, P., (...), Zabibah, R.S., Sharma, V. (2023), "FEA-Based Investigation of Fatigue Life and Durability of Materials and Structures in Automotive Applications" E3S Web of Conferences, 430, 01115, ISSN: 25550403, Open Access, Volume 430, 6 October 2023, Article number 01115, 15th International Conference on Materials Processing and Characterization, ICMPC 2023, Newcastle, 5 September 2023 through 8 September 2023, Code 193310. https://doi.org/10.1051/e3sconf/202343001115
  • Agrawal, M.K., Kumari, T.S., Maan, P., (...), Mashkour, M.S., Sharma, V. (2023), "Coupled Multi physics Simulation using FEA for Complex Fluid-Structure Interaction Problems" E3S Web of Conferences, 430, 01116, ISSN: 25550403, Open Access, Volume 430, 6 October 2023, Article number 01116, 15th International Conference on Materials Processing and Characterization, ICMPC 2023, Newcastle, 5 September 2023 through 8 September 2023, Code 193310. https://doi.org/10.1051/e3sconf/202343001116
  • Agrawal, M.K. (2023), "An Assessment of Mechanical Characterization of Materials at Micro-and Nano-Scale" AIP Conference Proceedings, 2721(1), 070001, ISSN: 0094243X, Volume 2721, Issue 1, 27 July 2023, Article number 070001, 2nd International Conference on Futuristic and Sustainable Aspects in Engineering and Technology, FSAET 2021, Mathura, 24 December 2021 through 26 December 2021, Code 191264. https://doi.org/10.1063/5.015471
  • Agrawal, M.K. (2023), "Employing Functional Optimization Algorithms to Optimize Production Development in Supply Chains" AIP Conference Proceedings, 2721(1), 070027, ISSN: 0094243X, Volume 2721, Issue 1, 27 July 2023, Article number 070027, 2nd International Conference on Futuristic and Sustainable Aspects in Engineering and Technology, FSAET 2021, Mathura, 24 December 2021 through 26 December 2021, Code 191264. https://doi.org/10.1063/5.0154717
  • Agrawal, M.K. (2023), "Comparative Study of the Applications of Forged Micro-Alloy and As-Cast Micro-Alloy Steel in Automotive Industries" AIP Conference Proceedings, 2721(1), 070029, ISSN: 0094243X, Volume 2721, Issue 1, 27 July 2023, Article number 070029, 2nd International Conference on Futuristic and Sustainable Aspects in Engineering and Technology, FSAET 2021, Mathura, 24 December 2021 through 26 December 2021, Code 191264. https://doi.org/10.1063/5.0154719
2022
  • Dewangan, S., Singh, P., Agrawal, M.K., Kumar, S.D. (2022), "Analysis of Parametric Study on Weld Properties in TIG Welding" Lecture Notes in Mechanical Engineering, pp. 717-726, ISSN: 21954356, ISBN: 978-981169056-3, 2023 2nd International Conference on Recent Advances in Mechanical Engineering Research and Development, ICRAMERD 2021, Virtual, Online, 21 February 2021 through 21 February 2021, Code 278889. https://doi.org/10.1007/978-981-16-9057-0_77
  • Vishwakarma Sameer, Dwivedi V. K. & Agrawal Manoj Kumar (2022), "Optimization Techniques Used to Optimize Process Parameters of Submerged Arc Welding: A Review" Lecture Notes in Mechanical Engineering, Pages 67-81, 2022, 1st International Conference on Energy, Material Sciences and Mechanical Engineering, EMSME 2020, New Delhi, 30 October 2020 through 1 November 2020, Code 270569, ISSN 21954356, ISBN 978-981162793-4. https://doi.org/10.1007/978-981-16-2794-1_6
2020
  • Singhal Piyush & Agrawal Manoj (2020), "Rising the liberated Compressive Strength in Cement for Black Cotton Soil using Shredder Rubber" IOP Conference Series: Materials Science and Engineering, Open Access, Volume 988, Issue 1, 15 December 2020, Article number 012075, 2020 International Conference on Recent Developments in Material Science and Applications, ICRDMSA 2020, Chennai, 25 September 2020 through 26 September 2020, Code 165826, ISSN 17578981. https://doi.org/10.1088/1757-899X/988/1/012075
  • Agrawal Manoj Kumar & Sharma Vikash Kumar (2020), "Studies on Development and Characterization of Biomaterials for Drug Delivery" IOP Conference Series: Materials Science and Engineering, Open Access, Volume 988, Issue 1, 15 December 2020, Article number 012068, 2020 International Conference on Recent Developments in Material Science and Applications, ICRDMSA 2020, Chennai, 25 September 2020 through 26 September 2020, Code 165826, ISSN 17578981. https://doi.org/10.1088/1757-899X/988/1/012068
  • Sharma Vikash Kumar & Agrawal Manoj Kumar (2020), "Hepatotoxicity study of Nanotitania on Mice and Zebra fish: A comparison" IOP Conference Series: Materials Science and Engineering, Open Access, Volume 988, Issue 1, 15 December 2020, Article number 012067, 2020 International Conference on Recent Developments in Material Science and Applications, ICRDMSA 2020, Chennai, 25 September 2020 through 26 September 2020, Code 165826, ISSN 17578981. https://doi.org/10.1088/1757-899X/988/1/012067
  • Vikas Sharma, Manoj Kumar Agrawal & Surender Kumar, "Plastic deformation of a metallic pre form" 10th International Conference on Materials Processing and Characterization (ICMPC-2020), organized by Department of Mechanical Engineering, GLA University, Mathura, in association with Gokararu Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad and The Indian Institute of Metals (IIM)-Mathura Chapter, during 21-23 February 2020.
2019
  • Manoj Kumar Agrawal & Surender Kumar (2019), "Performance Index of Frugal Manufacturing System" 2nd International Conference: Computational & Experimental Methods in Mechanical Engineering (ICCEMME-2019), held on 3-5 May 2019 and organized by Department of Mechanical Engineering, GLBITM, Greater Noida (U.P.), India.
  • Manoj Kumar Agrawal & Surender Kumar, "Lean Manufacturing Philosophy: “An approach to improve production efficiency and customer responsiveness”" 1st International Conference on Innovative Technologies in Mechanical Engineering (ITME-2012), 24th & 25th August 2012, organized by Department of Mechanical Engineering, Krishna Institute of Engineering & Technology, Ghaziabad (U.P.), India.

National Conferences

  • IIPE 37th Anniversary Meet Cum National Conference on “Global Competitiveness through Quick Response Manufacturing (Challenges & Opportunities for Indian Manufacturers)”, April 18-20, 2014, University Polytechnic, GLA University, Mathura.
  • National Symposium on “Cleaner Production: Technologies & Strategies”, October 25 & 26, 2013, University Polytechnic, GLA University, Mathura.
  • National Conference on “Achieving Excellence for Industrial Competitiveness”, 19-20 Jan., 2013, Institute of Engineering & Technology, GLA University, Mathura.
  • National Conference on “Eco-Friendly Manufacturing for Sustainable Development”, 19-21 Nov., 2010, Institute of Engineering & Technology, GLA University, Mathura.
  • Attended the International Conference on “Challenges and Strategies for Sustainable Energy, Efficiency & Environment” held on June 10-11, 2006, organized by U.P.T.U, Lucknow and Quality Up-gradation program attended / participated.

Subjects Taught

+
  • Mechanical Engineering & Automation
  • Industrial Management
  • Computer Aided Manufacturing
  • CNC & Robotics
  • Robotics & FMS
  • Industrial Automation & Robotics
  • Material Science
  • Manufacturing Science-I & II
  • Welding Technology
  • Workshop Technology etc.

Research Interest

+
  • Materials Characteristics
  • Lean Manufacturing
  • Frugal Manufacturing

Others

+

Patents Granted

  • Optimized Inbuilt Pneumatic Jack: Indian Patent Office (IPO), Granted on Feb. 24, 2023.
  • Indian Cut Off System: Indian Patent Office (IPO), Granted on Jan. 15, 2024.
GLA Virtual Tour Admission Query

By submitting this form, I agree to receive notifications from the University in the form of SMS/E-mail/Call.

Graduate
  • B.Tech Programs
  • UG Programs
  • Lateral Entry
Post Graduate
  • M.Tech Programs
  • PG Programs
Doctoral
  • Doctoral Programs
Diploma
  • Diploma Programs
Admissions Helpline
Apply Online GLA
View All Contact Details GLA
Pay Online GLA
Programs
Admissions
Contact Us
Menu