Faculty

Admission Query

Prof. (Dr.) Kamal Sharma

  • Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Contact Details:

    Email : kamal.sharma@gla.ac.in

    Contact Number :05662250909

  • Experience

    16 Years

  • Qualifications

    • Ph.D. Polymer Nano-composites 2014
      Motilal Nehru National Institute of Technology, Allahabad (UP)
      Dissertation: “Mechanical Properties of Carbon Fiber / Functionalized Multi-Walled Carbon Nanotubes/ Epoxy Multiphase Composites: Modeling, Simulation and Characterization” Advisor: Prof. Mukul Shukla
    • M.Tech. Computer aided design and drafting 2007
      Dr. A.P.J. Abdul Kalam Technical University, Uttar Pradesh, Lucknow Thesis: “Effective database implementation on to a CAD system”
      Advisor: Late Prof. S.B.L. Garg (Ex-Principal, MNREC, Allahabad)
    • B.E. Mechanical Engineering 1999
      B.N.College of Engineering, Pusad, (MS), Amravati University
      Thesis: “Multi-purpose attachment for shaper tool head” Advisor: Prof. P.N. Jhumle
  • Ph. D.

    Thesis Supervised

  • Awarded/ Completed-

    Working02

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed01

    Working03

Journal

  • 1 Kumar A., Sharma K. and Dixit A., a Review of the Mechanical and Thermal properities of Graphene and its hybrid polymer Nanocomposites for Structural applications. Journal of material Science, accepted (2018) (SCI) https://doi.org/10.1007/s10853-018-03244-3.
  • 2 Shukla M., and Sharma K., Review of Mechanical Properties and Characterization of Epoxy based Composites. Polymer Science, accepted (2018) (SCI).
  • 3 Singh P. and Sharma K., Molecular Dynamics Simulation of Glass Transition Behavior of Polymer based Nanocomposites, Journal of Scientific and industrial research, 77 (2018), 592-595 (SCI) http://nopr.niscair.res.in/handle/123456789/45110.
  • 4 Singh P. and Sharma K., Mechanical and Visco-elastic Properties of In-situ Amine Functionalized Multiple Layer Graphene/Epoxy Nanocomposites, Current Nanoscience, 14 (2018), 252-262 (SCI), doi: 10.2174/1573413714666171220144549.
  • 5 Singh P. and Sharma K., Experimental Investigation and Simulation of Mechanical Properties of Amine Functionalized Multiple Graphene Layer Reinforced Composites, International Journal of Materials and Production Technology (IJMPT) (2017), (SCI) Under Review.
  • 6 Yadav. A., Kumar A., Singh P.K, Sharma K., Glass transition temperature of functionalized graphene epoxy composites using molecular dynamics simulation, Integrated Ferroelectrics, 186 (2017), 106-114 (SCI) doi: org/10.1080/10584587.2017.1370331.
  • 7 Singh P.K, Sharma K., Kumar A., Shukla M. Effects of functionalization on the mechanical properties of multi-walled carbon nanotubes: A Molecular approach, Journal of composite materials, 51(5) (2016) 671-680 (SCI) doi: 10.1177/0021998316649781.
  • 8 Tyagi S., Dwivedi V.K., Sharma K. Evaluation of mechanical properties of single walled carbon nanotube/HDPE-P5300 composites using molecular dynamics, Advanced Materials Manufacturing and Characterization, 6(1) (2016) 58-64.
  • 9 Sharma K., Kaushalayan K.S, Shukla M. Pull-out simulations of interfacial Properties of amine functionalized multi-walled epoxy composites. Computational materials science, 99(2015) 232-241. (SCI) doi.org/10.1016/j.commatsci.2014.12.023.
  • 10 Sharma K., Shukla M. Processing, characterization and modeling of amine Functionalized carbon nanotubes incorporated carbon fiber/epoxy Composites. Journal of nanomaterials (2014) 1-10. (SCI) doi.org/10.1155/2014/837492.
  • 11 Sharma K., Shukla M. Molecular modeling of mechanical behavior of amine Functionalized multiwalled carbon fiber epoxy composites. New Carbon Materials 29 (2), (2014) 132-142. (SCI) doi: 10.1016/S1872-5805(14)60131-1.
  • 12 Sharma P., Sonia P., Sharma K.,Mausam K. Dynamic Mechanical Properties Composite Reinforced with Alumina Nanorods. Advance Science Letters 21 (9) (2015) 2833-2835. (SCOPUS) https://doi.org/10.1166/asl.2015.6369.
  • 13 Sharma K., Kaushalyan K.S. Effect of Amino Functionalized Carbon Nanotubes on Thermal Mechanical Properties of Multi-Walled Carbon Nanotube/Epoxy Composite. Advance Science Letters 21(9) (2015) 2790-2793. (SCOPUS) doi.org/10.1166/asl.2015.6373.
  • 14 Sharma P., Tiwari M., Sharma K. Design and analysis of a process plant piping system. International Journal of Current Engineering and Technology (2014) 31-39. Available at http://inpressco.com/category/ijcet.
  • 15 Mausam K., Tiwari M., Sharma K., Singh RP. Process parameter optimization for maximum material removal rate in high speed elctro-discharge machining. International Journal of Current Engineering and Technology, 3(3) (2014) 239-214. Available at http://inpressco.com/category/ijcet.
  • 16 Tiwari M., Mausam K., Sharma K., Singh RP. Experimental Analysis of Electro-Discharge Machining Parameters for Minimum Tool Wear Rate on Machinability of Carbon Fiber/Epoxy Composites Using Taguchi Method, International Journal of Engineering Research & Technology (IJERT) 2(10) (2013) 3182-3188. (SCOPUS) www.ijert.org/view-pdf/5972.
  • 17 Tiwari M., Mausam K., Sharma K., Singh RP. Molecular dynamics simulation study of novel properties of defect full single walled carbon nanotubes, International Journal of Application or Innovation in Engineering & Management 2(2) (2013) 77-81. https://www.scribd.com/document/131437831.
  • 18 Saxena K.K, Srivastava V., Sharma K. Calculation of fundamental Mechanical Properties of Single-walled Carbon Nanotube Using Non-local elastic. Advanced Materials Research 383(390) (2012) 3840-3844. (SCOPUS) doi10.4028/www.scientific.net/AMR.383-390.3840.
  • 19 Sharma K., Shukla M. Experimental study of Mechanical properties of Multi-scale Carbon fiber-epoxy-CNT-composites. Advanced Materials Research 383(390) (2012) 2723-2727. (SCOPUS) doi:10.4028/www.scientific.net/AMR.383-390.2723.

International Conferences

  • 1 Mausam K., Sharma K., and Singh RP, “Selection of suitable process parameters for die sinking EDM using GRA for CNT 10 layered Carbon fiber nanocomposites” International conference on emerging trends in Engineering Innovations Technology and Management (ICET-EITM-2017), NIT Hamirpur, 16-18 Dec-2017, pp-192-195. ISBN:9789386724311.
  • 2 Mausam K., and Sharma K., “Comparative experimental investigation of properties of KEVLAR composites and E-Glass reinforced Kevlar fiber hybrid composite for making component of wing box in Aerospace industry” 41st National conference, Dayalbagh Educational Institute, Agra, Dec. 1-2, 2017, ISBN:978-14673-00.
  • 3 Soina P., Sharma K., “Tensile behaviour of hybrid polymer nano-composite reinforced by Al2O3 rod and spherical shape nano particles” 4th International Conference on Industrial Engineering (ICIE-2017), pp- 594-597, SVNIT, Surat, Dec. 21-23, 2017, ISBN: 978-93- 86238-39-9, Publisher: Excellent Publishing House.
  • 4 Kumar A., Sharma K., Singh P. K., Dwivedi. V. K. Mechanical characterization of vacancy defective single-walled carbon nanotube epoxy/composites. Materials Today Proceedings, 4(2) 4013-4021, 2017. (SCOPUS) https://doi.org/10.1016/j.matpr.2017.02.303
  • 5 Shukla M.K., Kumar A., Yadav A., Sharma K., Improved Mechanical Properties of raphene Oxide Reinforced Cross-linked Epoxy Nanocomposites: A Molecular Dynamics Approach, 2nd International Conference on Emerging Materials: Characterization and Applications, NIT, Durgapur, Materials Today Proceedings. pp: 113, 2017. (SCOPUS)
  • 6 Yadav A, Kumar A., Shukla M.K, Sharma K. Investigating the Effects of Amine Functionalized, Graphene on the Mechanical Properties of Epoxy Nanocomposites, 2nd International conference on Emerging Materials: Characterization and Applications, NIT, Durgapur, Materials Today Proceedings. pp: 114, 2017. (SCOPUS)
  • 7 Mausam K, Singh R.P., Sharma K., Investigation of Optimum Process Parameter for Minimum Tool Wear in EDM Process, International Conference on Frontiers in Engineering, Applied Sciences & Technology, NIT, Trichy, pp: 115-119, 2017. BEST PAPER AWARD
  • 8 Kukreja N., Alam M., Nirankari D., Sharma K., Numerically Comparing Simple and Shchelkin Spirals Type of Tubes of a Pulse Detonation Engine, National Conference on Recent Advances in Mechanical Engineering NIT, Kurukshetra, pp- 85-89, 2017.
  • 9 Sonia P., Singh P.K., Sharma K., Tensile Behavior of Hybrid Polymer Nanocomposite Reinforced by Al2O3 Rod and Spherical Shape Nano Particles, NIT, Durgapur, Materials Today Proceedings, paper No: 44, 2017. (SCOPUS)
  • 10 Mausam K., Singh R.P., Sharma K., Annirudh, Development of Genetic Algorithm (GA) Model for optimization of Tool Wear Rate (TWR) for 6 Layered Carbon Fiber based Epoxy composites, IVth International Conference on Production and Industrial Engineering, CPIE- 2016, Dr. B. R. Ambedkar NIT Jalandhar, Paper no. 138, 2016.
  • 11 Mausam K., Singh P.K., Sharma K., Gupta R.C., Investigation of process parameter of EDM using genetic algorithm (GA) approach for carbon fiber based two phase epoxy composites, International Conference on Recent Advances in Nano Science and Technology -, Material Today Proceeding. 2016 (Scoupus). https://doi.org/10.1016/j.matpr.2016.11.081
  • 12 Kumar A., Sharma K., Singh P.K., Ashraf J., Effect of different vacancy patterns on mechanical properties of single – walled carbon nanotubes using molecular dynamics, International conference on Computational Condensed Matter Physics and Material Science, 2015.
  • 13 Mausam K., Sharma K., Gupta R.C., Taliwal M., Investigation of optimum parameter of electro-discharge machining for two phase carbon fiber composites using taguchi method, Tronida India, ISSN(PRINT):2394-6202,(ONLINE):2394-6210,Vol (1), pp-15-18, 2015.
  • 14 Tiwari M., Mausam K., Sharma K., Singh R.P., Investigate the Optimal Combination of Process Parameters by Using a Grey Relational Analysis. Procedia Engineering vol5, pp1736-1744, 2014. (Scoupus) https://doi.org/10.1016/j.mspro.2014.07.363
  • 15 Tiwari M., Mausam K., Sharma K., Process Parameter Optimization of a High Speed Electro- Discharge Machining using a Taguchi Fuzzy-Based Approach, International Conference on Mechanical Engineering: Emerging Trends for Sustainability, 29-31 January, organized by MANIT, Bhopal. 2014.
  • 16 Kaushalyayan K.S., Tiwari M., Kumar D., Sharma K., Dwivedi V.K., Pathak D.K., Investigation of Process Parameters for EDM of Carbon Fiber Epoxy Composites using TOPSIS, (Presented at 2014 NIT-MTMI International Conference on Emerging Paradigms and Practices in Global Technology, Management & Business Issues, NIT, Hamirpur, and published in Review of Business & Technology Research, Vol. 11 (1) Page no. 163-169, ISSN 1941-9414, 2014.
  • 17 Mausam K., Sharma K., Study of Mechanical Properties of Carbon Nanotubes with Synthesis and Production Methods - A Review, National Conference on Achieving, Excellence for Industrial Competitiveness (AEIC), GLA University Mathura, , paper id. 153, 2013.
  • 18 Sharma K., Shukla M., Molecular dynamics simulation of the effect of amine functionalization on the elastic properties of single, double & triple walled carbon nanotubes, Eighth South African Conference on Computational and Applied Mechanics (SACAM-2012), Johannesburg, South Africa, 2012.
  • 19 Sharma K., Saxena K., Shukla M., Effect of number of Stone-Wales and vacancy defects on the mechanical behavior of carbon nanotube using molecular dynamics, Procedia Engineering,38, 3373-3380, 2012. (Scopus). https://doi.org/10.1016/j.proeng.2012.06.390
  • 20 Sharma K., Shukla M., Micro-mechanics modeling and experimental study of Mechanical properties of Multi-scale Carbon-fiber-epoxy-CNT-composites. International conference on Applied Mechanics and Materials Conference: Chicago, Illinois, 2011 (ASME-2011).
  • 21 Sharma K., Shukla M., Molecular dynamics evaluation of mechanical properties of carbon nanotubes with number of Stone-Wales defects. International conference on Nano Science, Engineering and Technology (ICONSET 2011), IEEE Explore (Scopus). pp 305-310, 2011. DOI:10.1109/ICONSET.2011.6167932.
  • 22 Sharma K., Shukla M., Saxena K., Molecular Dynamics study of Mechanical Properties of Carbon-Nanotube reinforced LY556 composites. International conference on Nano-science and Technology, Singapore (Conference proceedings will be published by ASME, and paper will be included in ASME digital library (Scopus), and Indexed by EI compendex, Thomson ISI proceedings). pp470-474, 2011. DOI:10.1115/1.859841.paper77.
  • 23 Sharma K., Shukla M., Saxena K., Calculation of Elastic properties of PMMA/CNT using molecular Dynamics Study, International conference on Nano-science and Technology, Singapore (Conference proceedings will be published by ASME and paper will be included in ASME digital library (Scopus), and indexed by EI compendex, Thomson ISI proceedings). pp 475-480, 2011. DOI: 10.1115/1.859841.paper76.
  • 24 Sharma K., Mausam K., Vimal J., Srivastva S., CNT:-Strength behind composites: A Review. National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4-5 April 2011 (Published by NAROSA).
  • 25 Mausam K., Sharma K., Arif M., Agrawal A., Future backbone of Development: GREEN Engineering and Technology. National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4-5 April, 2011 (Published by NAROSA)
  • 26 Reddy D.M., Sharma K., Shukla M., Effect of Amine functionalized Multi-walled Carbon Nanotubes on the mechanical properties of Carbon Fiber/Epoxy composites. International Conference on Synthesis, Characterization, Consolidation and modeling of nano materials: PSG Coimbatore, INDIA, March 05-06, , pp-222-227, 2010.
  • 27 Sharma K., Shukla M., Reddy D.M., Fabrication, Characterization and modeling of Amine Functionalized carbon nanotubes Carbon/fiber epoxy composites. International Conference on NANO-Technology- Materials and composites for Frontier Applications. Bhartiya Vidyapeeth University, Pune-India, October 14-15, pp53-54, 2010.
  • 28 Saxena K., Sharma K., Evaluation of Poisson’s Ratio of Carbon Nanotubes (CNT) in different directions, National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20 and 21, Paper No. 37, 2010
  • 29 Sharma K., Bhardwaj B., Analysis of Disc Brakes in transient thermo-elastic conditions using ANSYS. National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20and 21, Paper no.58, 2010.

Workshop Conducted

  • 01Engineering Drawing using CAD and Elements of MATLAB, 10-11 October 2009, Dept. of Mechanical Engineering, GLAITM, Mathura.
  • 02Elements and Application of MATLAB in Engineering, 29-31 October 2010 (part-1), Dept of Mechanical Engineering, GLA University.
  • 03Elements and Application of MATLAB in Engineering, Nov. 27-28, 2010, (part-I1), Dept of Mechanical Engineering, GLA University.
  • 04Two Day Workshop on "Analysis of Fluid Flow and Heat Transfer Problem with Ansys- CFX", March 14-15, 2015, Dept of Mechanical Engineering, GLA University.

Conference Organized

  • 01IIPE 37th Anniversary meet cum National Conference on “Global Competitiveness through Quick Response Manufacturing: Challenges and Opportunities for Indian Manufacturers”, 18-20 April 2014 (Convener).
  • 02National conference on “Achieving excellence for industrial competitiveness”, 19-20 January 2013 (Convener).
  • 03National conference on “Competitive manufacturing: strategies & decision support systems”, 05-06 November 2011 (Joint organizing Secretary).
  • 04National Meet cum Round Table Conference on “Energy, Environment and Sustainable Development”, 26-27 February 2011. Research Promotion Cell, GLA University, Mathura.
  • 05National Conference on “Eco-friendly manufacturing for Sustainable Development”, 19-21 November 2010, Institute of Engineering and Technology, GLA University, Mathura.
  • 066th National conference on “Information Technology and Energy Management”, 20-21 February, 2010, GLAITM, Mathura.
  • 06National Conference on “Advancement of Technologies – Global Scenario”, 25-26 Feb., 2007, G.L.A.I.T.M., Mathura. India

International Conference

  • 01Kuwar Mausam, Mohit Tiwari, Kamal Sharma, Ravindra Pratap Singh. “Process Parameter Optimization for Maximum Material Removal Rate in High Speed Electro-Discharge Machining”, International Symposium on Engineering and Technology, 9-10 January, 2014 organized by KJEI’s Trinity College of Engineering and Research, Pune. The paper is selected for publication in Applied Mechanics and Materials (AMM) journal as a special volume titled “Advanced Research in Design, Manufacturing and Materials”.
  • 02Mohit Tiwari, Kuwar Mausam, Kamal Sharma. “Process Parameter Optimization of a High Speed Electro-Discharge Machining using a Taguchi Fuzzy-Based Approach”, International Conference on Mechanical Engineering: Emerging Trends for Sustainability, 29-31 January, 2014 organized by Maulana Azad National Institute of Technology, Bhopal.
  • 03Payal S., Tiwari M., Sharma K. “ Design and analysis of a process plant piping system” International Symposium on Engineering and Technology, 9-10 January, 2914, 2014 organized by KJEI’s Trinity College of Engineering and Research, Pune.
  • 04Mohit Tiwari, Kuwar Mausam, Kamal Sharma. “Development of Fuzzy Model for Process Parameter Optimization of a High Speed Electro-Discharge Machining”, Nirma University International Conference on Engineering, 28-30 November, 2013 organized by Nirma University, Ahmedabad in association with IEEE and Science-Direct. Paper is selected for publication in Elsevier-Procedia Engineering.
  • 05K. Sharma, and M. Shukla. Molecular dynamics study of the effect of amine functionalization on the elastic properties of single and multiwall carbon nanotubes (accepted for publication) in the Eighth South African Conference on Computational and Applied Mechanics (SACAM-2012), Johannesburg, South Africa.
  • 06K. Sharma, and M. Shukla. Effect of multiple Stone-Wales Vacancy Defects on the Mechanical behavior of Carbon Nanotube using molecular dynamics. All the accepted papers of ICMOC 2012 will proudly publish by Elsevier and is available on Science Direct. It will also be indexed by SCOPOUS &EI.
  • 07K. Sharma, and M. Shukla . Molecular dynamics evaluation of mechanical properties of carbon nanotubes with number of Stone-Wales defects. International conference on Nano Science, Engineering and Technology (ICONSET 2011), 28-30 November 2011 IEEE Explore. pp 305-310.
  • 08K. Sharma, M. Shukla and K.Saxena. Molecular Dynamics study of Mechanical Properties of Carbon-Nanotube reinforced LY556 composites. International conference on Nano-science and Technology, 14-16 October 2011, Singapore (Conference proceedings will be published by ASME, and paper will be included in ASME digital library, and Indexed by EI compendex, Thomson ISI proceedings). pp 470-474. http://asmedl.org/ebooks/asme/asme_press/859841/859841_paper77.
  • 09K. Sharma, M. Shukla and K.Saxena Calculation of Elastic properties of PMMA/CNT using molecular Dynamics Study. International conference on Nano-science and Technology, 14-16 October 2011, Singapore (Conference proceedings will be published by ASME and paper will be included in ASME digital library, and indexed by EI compendex, Thomson ISI proceedings). pp 475-480. http://asmedl.org/ebooks/asme/asme_press/859841/859841_paper76
  • 10K. Sharma, M. Shukla and K.Saxena. Calculation of fundamental Mechanical Properties of Single-walled Carbon Nanotube Using Non-local elastic. International Conference on Manufacturing science and Technology, 16-18 Sep, Singapore ((Indexed by Elsevier: SCOPUS www.scopus.com and EI Compendex (CPX) www.ei.org/. Cambridge Scientific Abstracts (CSA) www.csa.com, Chemical Abstracts (CA) www.cas.org)
  • 11K. Sharma, M. Shukla and K.Saxena. Experimental Study of Mechanical Properties of Multi-scale Carbon fiber-Epoxy-CNT composites. International Conference on Manufacturing science and Technology, 16-18 Sep, Singapore (Which is indexed by Elsevier: SCOPUS www.scopus.com and EI Compendex (CPX) www.ei.org/. Cambridge Scientific Abstracts (CSA) www.csa.com, Chemical Abstracts (CA) www.cas.org.
  • 12K. Sharma and M. Shukla. Micro-mechanics modeling and experimental study of Mechanical properties of Multiscale Carbon-fiber-epoxy-CNT-composites. International conference on Applied Mechanics and Materials Conference: Chicago, Illinois, May30-June01 2011 (ASME-2011), paper number-4346. http://www.asmeconferences.org/McMat2011/SearchPaperSchedule.cfm
  • 13 K. Sharma, M. Shukla and K.Saxena. Fabrication, Characterization and modeling of Amine Functionalized carbon nanotubes Carbon/fiber epoxy composites. International Conference on “NANO-Technology- Materials and composites for Frontier Applications. Bhartiya Vidyapeeth University, Pune-India, October 14-15, 2010, pp53-54.
  • 14D.M.Reddy, K. Sharma and M. Shukla. Effect of Amine functionalized Multi-walled Carbon Nanotubes on the mechanical properties of Carbon Fiber/Epoxy composites. International Conference on Synthesis, Characterization, Consolidation and modeling of nano materials: PSG Coimbatore, INDIA, March 05-06, 2010, pp-222-227.

National Conferences

  • 01K. Sharma, K.Mausam, J.Vimal Srivastva. CNT:-Strength behind composites: A Review. National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4-5 April2011 (Published by NAROSA).
  • 02K. Mausam, K. Sharma, M. Arif, and A.Agrawal. Future backbone of Development: GREEN Engineering and Technology. National conference on emerging Vistas of Mechanical Engineering in 21st century, Anand Engineering College, 4-5 April2011 (Published by NAROSA).
  • 03Sharma K., Bhardwaj B. Analysis of Disc Brakes in transient thermo-elastic conditions using ANSYS. National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20and 21 2010, Paper no.58.
  • 04Saxena K., Sharma K. Evaluation of Poisson’s Ratio of Carbon Nanotubes (CNT) in different directions. National Conference on Eco-Friendly Manufacturing for Sustainable Development, GLA University Mathura (U.P.) India, Nov 19,20and 21 2010, Paper No. 37.
  • 05Sharma K. Effect of Nano-reinforcements on energy absorption Capabilities of Polymer Nano composites: A review. National Conference on Information Technology & Energy Management, GLAITM, Mathura (U.P.) INDIA, Feb 21-22, 2010, pp-45-49.
  • 06Sharma K. Effective Database Implementation on CAD Software. National Conference on Emerging Trends of Mechanical Engineering, GLAITM, Mathura (U.P.) INDIA, Feb 23-25, 2009, pp61-64.
  • 07Sharma K., Yadav G. Need of Flexible Manufacturing System in Today’s Scenario.. National Conference on Advance Manufacturing Process – GLAITM, Mathura (U.P.) INDIA, Feb 21-23, 2007.
  • 08Bajaj R., Sharma K. and Mangla P. Surface Finish Optimization in honing proces, National Conference on Manufacturing Technology – HCST, Agra (U.P.) INDIA, Feb 04-05, 2006, pp76-78.
  • 01Life time member of ISTE.
  • 02Faculty Associate Member of ASME student Chapter GLA University.
  • 03Associate member of IIPE.

Teaching Experience

Teaching Experience

(Sep.1999 – Till Date)

Professor, Dept. of Mechanical Engineering
G.L.A. University, Mathura

Mar.2015 – Till Date

Reader, Dept. of Mechanical Engineering
G.L.A. Institute of Technology & Management, Mathura

Sep.2007 – Aug.2011

Senior Lecturer, Dept. of Mechanical Engineering
G.L.A. Institute of Technology & Management, Mathura

Sep.2005 – Sep.2007

Lecturer, Dept. of Mechanical Engineering
G.L.A. Institute of Technology & Management, Mathura

Sep.1999 – Sep.2005

Patents filed and published

  • Sharma, K., Prateek, Ritesh, Sengar, S.S., Shukla, R.K., Verma, G, Randhawa, K.S., Mishra, H., and Singh, T. (2018). India Patent No. 201811026312. Delhi, India: Intellectual Property India.
  • Singh, A., Sharma, A., and Sharma, K. (2018). India Patent No. 201811033283. Delhi, India.: Intellectual Property India.

Professional Affiliations

  • Member, Indian Society for Technical Education [ISTE]
  • Faculty Associate Member, ASME Student Chapter GLA
  • University Associate Member, Indian Institution of Production Engineers [IIPE]

Research Center Establishment, Training Programs & Achievements

  • Micro-Nano Development Research Centre (MNDRC) was developed in the year 2015 with the help of internally funded project.
  • Advance Software Lab (ASL) was developed in the year 2011, equipped with latest software and hardware combinations.
  • Attended GIAN course on “Synthesis, Characterization, Processing and Applications of Nanomaterials” to be held at National Institute of Technology Warangal (NIT Warangal) during 7-11th March 2016.
  • Attended DPAT-2015 Short Term Training Program on “Rapid Prototyping and Autodesk tools” organized by MNNIT, Allahabad from 27 Feb to 4th March 2015.
  • Attended ISTE-SRM Short Term Training Program on “Advances in Refrigeration, Air conditioning and Cryogenics” organized by Anand Engineering College, Keetham, Agra on 31st March to 6th April 2014.
  • Participated in a one week Self-financed Short Term Course on CAE (11th July – 15th July 2013) sponsored by All India Council of Technical Education and organized by Mechanical Engineering Department, MNNIT, Allahabad.
  • Attended the workshop cum international conference on “Composites for 21st century current and future trends”, 4-7 January 2011, at IISC Bangalore. The course was sponsored by North Carolina A& T state University and Indian Society for advancements of materials and process engineering.
  • Participated in three days workshop on “Elements and Application of MATLAB in Engineering” (29-31 October 2010) organized by dept. of Mechanical Engineering of GLA University, Mathura India.
  • Participated in a two weeks STAFF DEVELOPMENT PROGRAM on CAD/FEM (21st July – 2nd Aug 2008) sponsored by All India Council of Technical Education and organized by Mechanical Engineering Department, MNNIT, Allahabad.
  • I had designed the model of the nature friendly car (ELF ELECTRA) by using Pro/Engineer Wild Fire 2.0 (The news was published in Economic Times March 26, 2006).

Research Guidance

PhD (in progress)-04, Awarded-01, MTech Completed-07, #Awarded, *In progress

S.No.

Type

Student Name

Research Focus

Time Frame

01

PhD

Mr. Pradeep Kr. Singh

Modeling, simulation and mechanical characterization of Amine functionalized epoxy composites

July 2014 GLA
University#

02

PhD

Mr. Mohan Gupta

Heat transfer and pressure drop characteristics of Nano-fluid in a circular tube with different nano-
material inserts with working fluid water

July 2015 GLA
University*

03

PhD

Mr. Manoj Kr. Shukla

Synergetic effects of amine functionalized graphene and multi-walled carbon nanotubes on the mechanical and thermal properties of epoxy
composites

July 2016 GLA
University*

04

PhD

Mr. Pankaj Singh

Experimental investigation and simulation of interfacial properties of epoxy composites
modified with functionalized graphene

July 2017 GLA
University*

05

PhD

Mr. Sumit Nagar

Development and testing of graphene based micro- mechanical models

July 2018 GLA
University*

06

MTech

Mr. Mohit Tiwari

Investigation of optimal combination of process parameters for EDM on carbon fibre epoxy
composites

2014 GLA
University#

07

MTech

Mr. Kuwar Mausam

Optimization of process parameters of electric
discharge machining on two and three phase carbon fiber epoxy nanocomposites

2015 AKTU
(Formerly UPTU)#

08

MTech

Mr. Kanishka Sen Kaushlayan

Experimental analysis and modeling of thermo-mechanical behaviour of Carbon fiber epoxy nano composite

2015 GLA
University#

09

M.Tech.

Ms. Payal Sharma

Modeling and experimental analysis of visco
elastic behavior of Al2O3 reinforced epoxy nano composite

2015 GLA
University#

10

M.Tech.

Mr. Amit Kumar

Molecular dynamics simulation of mechanical and visco-elastic performance of defect free and defective
carbon nanotubes and their composites

2016 GLA
University#

11

M.Tech.

Mrs. Shakshi Tyagi

Evaluation of mechanical properties of single- walled carbon nanotube/HDPE-P5300 composites using
molecular dynamics

2016 GLA
University#

12

M.Tech.

Mr. Anurag Yadav

Investigation of Visco-elastic Characteristics of Amine Functionalized Graphene Modified Epoxy Composites
using Molecular Dynamics

2017 GLA
University#

13

M.Tech.

Mr. Pawan Soni

Design, fabrication and modification in water solar
collector

2018 GLA
University*

14

M.Tech.

Mr. Krishna

Design, fabrication and testing of flat plate solar
thermal collector

2018 GLA
University*

Sponsored/Consultancy Project Details

S.
No.

Title

Name & Address of Client

Nature of Work

Name of Institution through which the project earned

1

Modeling, design and high Pressure die casting
for gear box for heavy gensets

ANH Engineering services
Pvt. Ltd., Faridabad (Harayana)

3D modeling and analysis

Gla University, Mathura

2

Modeling, Design and High Pressure Die Casting for Top Link
Bracket for Gensets

DKT Technology Service
Private Limited, Agra (U.P)

CAD Modeling 2D to 3D conversion, core cavity, Mould
preparation

GLA University, Mathura

3

Design, Development and Characterization of Graphene Enhanced Carbon Fiber Epoxy Composite for
Automotive Applications

Gla University Mathura

Mechanical characterization

GLA University, Mathura

4

Design and Development of Finger Print
Locks

NEWGEN Innovation and Entrepreneurship Development Centre (NEWGEN IEDC),
New Delhi

Design and Fabrication

GLA University, Mathura

Computational Skills

  • Good practices in modeling and simulation in Material Studio 5.0 and 6.0 software, LAMMPS, DLPOLY.
  • Pro/Engineer Wild Fire 2.0 and Autocad-2008 as design, drafting, and manufacturing software’s.
  • Knowledge of ANSYS 9.0 and HYPERMESH (Optistruct) as finite element analysis software’s.
  • Knowledge of MATLAB, MINITAB.

Experimental Skills

  • Probe Sonicator, Ultra bath sonicator, Particle size analyzer (PSA), DSC, DMA, TG-DTA for thermo-mechanical and viscoelastic characterization of materials. Composite samples fabrication by wet layup (with and without hot press), vacuum bagging and autoclave molding. MTS for Material testing.
  • Good practices in modeling and simulation in Material Studio 5.0 software.

Professional Service

Referee Service

  • Computational Materials Science
  • Composite Science and Technology
  • Energy Conversion and Management
  • Journal of Applied Fluid Mechanics
  • Revista Ingeniería e Investigación
  • AIP Advances
  • Advances in Mechanical Engineering
  • Acta Mechanica

Conferences Organized

  • IIPE 37th Anniversary meet cum National Conference on “Global Competitiveness through Quick Response Manufacturing: Challenges and Opportunities for Indian Manufacturers”, 18- 20 April 2014 (Convener).
  • National conference on “Achieving excellence for industrial competitiveness”, 19-20 January 2013 (Convener).
  • National conference on “Competitive manufacturing: strategies & decision support systems”, 05-06 November 2011 (Joint organizing Secretary).
  • National Meet cum Round Table Conference on “Energy, Environment and Sustainable Development”, 26-27 February 2011. Research Promotion Cell, GLA University, Mathura.
  • National Conference on “Eco-friendly manufacturing for Sustainable Development”, 19-21 November 2010, Institute of Engineering and Technology, GLA University, Mathura.
  • 6th National conference on “Information Technology and Energy Management”, 20-21 February, 2010, GLAITM, Mathura.
  • National Conference on “Advancement of Technologies – Global Scenario”, 25-26 Feb., 2007, G.L.A.I.T.M., Mathura. India.

References

Prof. Durg Singh Chauhan
Vice President, All India Universities (AIU), Founder Vice Chancellor of UPTU and UTU Mathura-281406
Mobile: +919557888181,
Email:pdschauhan@gmail.com

Prof. (Dr.) Surender Kumar
President, Indo US Research Institute for Sustainable Development, California, USA Mobile: +15105163380
Email: skumar@iurisd.org

Dr. Mukul Shukla
Lecturer, School of Mechanical and Aerospace  Engineering Queen’s University, Belfast, BT9 5AH,  Northern Ireland, UK, Ph (O)- 0044-7827858184.
Associate Professor, Mechanical Engineering Department, MNNIT, Allahabad-21100 (UP), India, and Associate Professor (Visiting)
Department of Mechanical Engineering Technology University of Johannesburg, Johannesburg, South Africa
Email: m.shukla@qub.ac.uk; mukulshukla@mnnit.ac.in; mshukla@uj.ac.za