Faculty

Admission Query

Dr. Vijay Kumar Dwivedi

  • Associate Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Contact Details:

    Email : vijay.dwivedi@gla.ac.in

    Contact Number :9412180331

  • Experience

    14 years

  • Qualifications

    PhD (2015): Motilal NehruNational Institute of Technology, Allahabad, U.P., India

    M.Tech. (Dec2001):Indian Institute of Technology Dhanbad (Indian school of Mines) Dhanbad, Jharkhand

    B.Tech. (2000): Institute of Engineering &Technology Kanpur (CSJM Kanpur University)

  • Ph. D.

    Thesis Supervised

  • Awarded/ Completed-

    Working01

  • Postgraduate

    Thesis Supervised

  • Awarded/ Completed03

    Working02

  • 01”Effect of lubricant supply arrangement on the static and dynamic performance parameters of hybrid journal bearings, (Under review) International Journal of Computational Method, World Scientific Publication.
  • 02”Effect of geometry of lobes on the static and dynamic performance of 2-lobe hybrid bearing, (Under review) SADHANA- Academy proceedings in Engineering Science, Springer Publication.
  • 03”Effects of Turbulence on Dynamic Performance of Accelerated/ Decelerated Hydrodynamic Journal Bearing System, International Journal of Design Engineering, 5(3) (2014) 256-288.
  • 04”Analysis of Hybrid (Hydrodynamic/Hydrostatic) Journal Bearing, International Journal Advanced Material Research, 650 (2013) 385-390.
  • 05”Effect of Different Flow Regime on the Static and Dynamic Performance Parameter of Hydrodynamic Journal Bearing, Proceedia Engineering, Elsevier, 51 (2013), 520-528.
  • 06”Effect of Number and Size of Recess on the Performance of Hybrid (Hydrostatic/Hydrodynamic) Journal Bearing, Proceedia Engineering, Elsevier, 51 (2013), 810-817.
  • 07”Selection of Fluid Film Journal Bearing: A Fuzzy Approach, Advances in Computer Science, Eng. &Appli, Springer. 166 (2012) 311-320.
  • 08”Effect of Geometry of Lobes and L/D Ratio on the Static Performance of 2-Lobe Hybrid Journal Bearing, International Journal of Pure & Applied Research in Engineering & Technology, 1 No.8 (2013) 64-71.
  • 09”Effects of Reynolds Number on Linear and Non- Linear Journal Trajectory at Constant Speed of Non Recessed Hybrid Journal Bearing, International Journal of Pure & Applied Research in Engineering & Technology, 1 No.8 (2013) 1-8.
  • 10”Design and CFD analysis of contraction wall profile of open circuit suction type wind tunnel, Technology Letters, 1(4) (2014) 9-13.
  • 11”Computational Investigation of Shell Liquid of Shell and Tube Heat Exchanger Permitting the Consequence of Rod Baffles Temperament on Liquefied Drift, Technology Letters, 1(11) (2014) 22-26.
  • 12”A Comparative Study of Static and Dynamic Characteristics of Wave Bearings and Cylindrical Journal Bearings, Technology Letters, 1(11) (2014) 17-21.
  • 13”Fuzzy based pricing model for old age insurance, International Journal for Fuzzy Logic Systems, 3 (1) (2013) 47-54.
  • 14 ”Modeling of Hydraulic Jump Characteristics in Sloping Prismatic Channels for Design and Manufacturing of Stilling Basin”, International Journal of Manufacturing Technology and Research, Vol. 6(2), 2010 37 – 41, ISSN: 0973 – 0281.
  • 15”Modeling of Sequent Depth Ratio and Relative Height of the Hydraulic Jump in Horizontal Prismatic Channels”, International Journal of Advances in Thermal Science and Engineering, Vol. 2, No.1, Page No. 73 – 78.
  • 16”Modeling of Relative height of the Hydraulic Jump in Horizontal Prismatic Channels Using C Programming”, Journal of the Instrument Society of India, Vol. 41(4), PP- 248-250, Dec-2011(Published from Department of Instrumentation, IISc Banglore) ISSN 0970-9983

National Conference – 06

  • 01National conference on “Achieving excellence for industrial competitiveness”, 19-20 January 2013 (Co-convener).
  • 02National conference on “Competitive manufacturing: strategies & decision support systems”, 05-06 November 2011 (Joint organizing Secretary).
  • 03National Meet cum Round Table Conference on “Energy, Environment and Sustainable Development”, 26-27 February 2011. Research Promotion Cell, GLA University, Mathura.
  • 04National Conference on “Eco-friendly manufacturing for Sustainable Development”, 19-21 November 2010, Institute of Engineering and Technology, GLA University, Mathura.
  • 0536th National conference on “Information Technology and Energy Management”, 20-21 February, 2010, GLAITM, Mathura.
  • 06National Conference on “Advancement of Technologies – Global Scenario”, 25-26 Feb., 2007, G.L.A.I.T.M., Mathura. India.

National Workshop – 07

  • 01Analysis of fluid flow and heat transfer problems with ANSYS-CFX, March 14 –15, 2015, Dept of Mechanical Engineering, GLA University, Mathura.
  • 02Faculty Development program on “Innovative Teaching Methods” 22 to 24 July 2014, GLA University, Mathura.
  • 04Software Enabled Analysis of Fluid Flow Problems, March 2 – 3, 2013, Dept of Mechanical Engineering, GLA University, Mathura.
  • 05Roboopus 2011, Feb. 26-27, 2011, in association with Robosapiens INDIA, GLA University, Mathura.
  • 06Elements and Application of MATLAB in Engineering, 29-31 October 2010(part-1), Dept of Mechanical Engineering, GLA University, Mathura.
  • 07Elements and Application of MATLAB in Engineering, Nov. 27-28, 2010, (part-I1), Dept of Mechanical Engineering, GLA University, Mathura.
  • 08Engineering Drawing using CAD and Elements of MATLAB, 10-11 October 2009, Dept. of Mechanical Engineering, GLAITM, Mathura.

International Conference – 31, National Conference – 23

  • 01A STTP on Structural Integrity, June 16-20, 2014. MNNIT, Allahabad.
  • 02National Workshop on Research Methodology in Fluid Mechanics (RMFM – 2013), 27 – 28, 2013, MNNIT, Allahabad.
  • 03High Impact Teaching Skills, 29 – 30 March, 2010, Mission 10X, Wipro & GLA Institute of Technology & Management, Mathura.
  • 04Mission 10x Workshop, 29 – 02 April, 2010, Mission 10x, Wipro & GLA Institute of Technology & Management, Mathura.
  • 05DELNET Orientation Programme, 29 July 2010, GLA Institute of Technology & Management, Mathura.
  • 06Challenges in Adoption of Industrial Automation – An India Perspective, 9 August, 2011, & GBTU Lucknow & Rockwell Automation, India.
  • 07Awareness-cum-Training Programme on IEEE Resources, 26 Feb. 2011, GLA University, Mathura in collaboration with IEEE.
  • 01Life member of NSFMFP IIT, Mumbai.
  • 02Life member of ISTE, New Delhi.
  • 03Life member of TSI Chennai.
  • 04Life member of Institution of Engineers (AMIE) Kolkata.