Faculty

Admission Query

Mr. Sanjeev Kumar Gupta

  • Assistant Professor
    Institute of Engineering & Technology
  • Department

    Department of Mechanical Engineering
  • Contact Details:

    Email : sanjeev.gupta@gla.ac.in

    Contact Number :9451946252

  • Experience

    8.5 Years

  • Qualifications

    • 2010 M.Tech (Fluids Engineering) MNNIT, Allahabad, U.P., India.
    • 2008 B.Tech (Mechanical Engineering) BSACET, Mathura U.P., India
  • Ph.D

    Thesis Supervised

  • Awarded/ CompletedNILL

    WorkingNILL

  • Postgraduate

    Thesis Supervised

  • Awarded/ CompletedNILL

    WorkingNILL

Chapter in Books

  • 1 DeeptiSoni, Bhupendra Singh, Sanjeev Kumar Gupta, 2012, “Reorienting Existing Indian Education for Sustainable Development of Society and Nation”, Education in Emerging Indian Society, Chapter – 15, Page No. 135 – 143, ISBN: 978 – 81 – 313 – 1326 – 8.
  • 2 Stuti Sharma, RukhsarGauri, Sanjeev Kumar Gupta, 2012, “Present Scenario of Female Education in India and its Scope of Development”, Educational Development, Chapter -29, Page No. 300 – 307, ISBN: 978 – 81 – 313 – 1318 – 3.
  • 3 Pankaj Tiwari, Jitendra Kumar Dixit, Sanjeev Kumar Gupta, Pratibha Singh, Harshit Gupta, 2012, “Educated Unemployed: A New Challenge before India”, Education System, Chapter – 05, Page No. 36 – 43, ISBN: 978 – 81 – 313 – 1324 – 4.

International Journal

  • 1 Sunil Kumar, Manish Kumar Rawat, Sanjeev Kumar Gupta, Aug. 2019, “An Evaluation of Current Status of Renewable Energy Source in India”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(10), pp: 1234– 1239, ISSN: 2278-3075. (Scopus)
  • 2 Alok Soni, Sanjeev Kumar Gupta, July 2019, “Finite Element Analysis of Aluminum Alloy at Many Die Channel Angles Using DEFORM-3D”, International Journal of Recent Technology and Engineering (IJRTE), 8(2), pp: 58 – 61, ISSN: 2277-3878. (Scopus)
  • 3 Manish Kumar Rawat, Sanjeev Kumar Gupta, February 2019, “Effect of Plane Shear Velocity Profile over a Streamline Cylinder”, International Journal of Engineering and Advanced Technology (IJEAT), 8(3), pp: 396 – 399, ISSN: 2249-8958. (Scopus)
  • 4 Sanjeev Kumar Gupta, R. C. Mehta, Piyush Singhal, February 2019, “Experimental Evaluation and Empirical Formulation of Hydraulic Jump Characteristics in Sloping Prismatic Channel”, International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8(4), pp: 288 – 292, ISSN: 2278-3075. (Scopus)
  • 5 Sanjeev Kumar Gupta, et al., July 2016, “Investigation of Coefficient of Skin Friction and Axial Velocity of Fully Developed Turbulent Flow through Pipe”, International Journal of Science & Technology, 2(7), pp: 312 – 318, ISSN: 2394 – 3750.
  • 6 Sanjeev Kumar Gupta, et al. May 2016, “Dissipation Index and Efficiency of Free Hydraulic Jump in Horizontal Prismatic Channel: An Experimental Approach”, Discovery Engineering, an International Journal, 4(21), pp: 245 – 251, ISSN: 2320 – 6675.
  • 7 V. K. Dwivedi, Sanjeev Kumar Gupta, November 2015, “Minimizing Heat Loss during Boiler Operation: A Case Study”, BLB International Journal of Science & Technology, pp: 318 – 324, ISSN: 0976-3074.
  • 8 Sanjeev Kumar Gupta, et al., 25 April 2013, “Modeling of Relative Length and Relative Energy Loss of Free Hydraulic Jump in Horizontal Prismatic Channel”, Procedia Engineering, Elsevier, Vol/Issue: 51C, pp: 529–537, ISSN: 1877- 7058. (Scopus)
  • 9 Sanjeev Kumar Gupta, et al., January – June 2011, “Modeling of Sequent Depth Ratio and Relative Height of the Hydraulic Jump in Horizontal Prismatic Channels”, International Journal of Advances in Thermal Science and Engineering, International Science Press, Serial Publication, New Delhi, Vol. 2, No.2, Page No. 73 – 78, ISSN: 0976 – 6820.
  • 10 Sanjeev Kumar Gupta, et al., July – Dec 2010, “Modeling of Hydraulic Jump Characteristics in Sloping Prismatic Channels for Design and Manufacturing of Stilling Basin”, International Journal of Manufacturing Technology and Research, Vol. 6, No.2, Page No. 37 – 41, ISSN: 0973 – 0281.

National Journal

  • 1 Sanjeev Kumar Gupta, et al., December 2011, “Modeling of Relative Height of Hydraulic Jump in Horizontal Prismatic Channel using C Programming”, Journal of the Instrument Society of India, Vol: 41, No: 4, pp: 248 – 250, ISSN: 0970 - 9983.
  • 1 Life member of National Society of Fluid Mechanics and Fluid Power (LMNSFMFP) governed by Indian Institute of Technology Bombay since January 2010, Membership Number – LM 516.
  • 2 Life member of Indian Society of Theoretical and Applied Mechanics (LMISTAM) governed by Department of Mathematics, Indian Institute of Technology Kharagpur since October 2012, Membership Number – L750.

International Conferences

  • 1 Sanjeev Kumar Gupta, R.C. Mehta, 16 -18 Dec 2017, “Experimental Study of Rapidly Varied Flow in Horizontal Prismatic Channel: Relative Pre Jump Depth”, International Conference on Emerging Trends in Engineering Innovation & Technology Management (ICET-EITM 2017), National Institute of Technology, Hamirpur, Page No. 253 – 255, ISBN: 9789386724311.
  • 2 Sanjeev Kumar Gupta, Shashank Singh, Shubham Goyal, Shubham Sachdeva, 31 March -01 April 2017, “CFD Analysis of Heat Transfer in a Square Duct”, International Conference on Frontiers in Engineering, Applied Sciences and Technology, NIT Trichy, Page No. 221 – 225, ISBN: 978 – 81 – 908388 – 8– 7.
  • 3 Shubham Goyal, Sanjeev Kumar Gupta, Shashank Singh, Nishant Yadav, 27 -29 March 2017, “Computational Investigation of Heat Transfer through Flow Over Cylinder and Effect of Magnus Force on it”, International Conference on Design, Materials & Manufacturing Concerns in Production of Quality Engineering Goods, HBTU Kanpur, Page No. 479 – 484, ISBN: 978 – 93 – 86256 – 70– 6.
  • 4 Sanjeev Kumar Gupta, et al., 04 – 06 February 2016, “Investigation of Coefficient of Skin Friction and Axial Velocity of Fully Developed Turbulent Flow through Pipe”, International Conference on Trends in Industrial and Mechanical Engineering (IC TIME 2016), MANIT Bhopal, MP, and TEQIP II, Vol. II, Page No. 282 – 287, ISBN: 978 – 93 – 84935 – 66 – 5.
  • 5 Sanjeev Kumar Gupta, et al., 04 – 06 February 2016, “Dissipation Index and Efficiency of Free Hydraulic Jump in Horizontal Prismatic Channel: An Experimental Approach”, International Conference on Trends in Industrial and Mechanical Engineering (IC TIME 2016), MANIT Bhopal, MP, and TEQIP II, Vol. II, Page No. 254 – 260, ISBN: 978 – 93 – 84935 – 66 – 5.
  • 6 Sanjeev Kumar Gupta, et al., 09 – 12 December 2012, “Design and Simulation of Open Circuit Blow Down Type Wind Tunnel”, Fourth International Congress on Computational Mechanics and Simulation (ICCMS 2012), IIT Hyderabad, A.P., Paper ID: 115.
  • 7 Sanjeev Kumar Gupta, et al., 06 -08 December 2012, “Modeling of Relative Length and Relative Energy Loss of Free Hydraulic Jump in Horizontal Prismatic Channel”,Nirma University International Conference on Engineering (NUiCONE 2012), Nirma University Ahemdabad, Gujarat, Paper id: 188.
  • 8 V. K. Dwivedi, Sanjeev Kumar Gupta, DeeptiSoni, Pratibha Singh, Bhupendra Singh, 24 – 25 August 2012, “Effect of Eccentricity Ratio on Pressure Profile of Short Journal Bearing”, 1st International Conference on Innovative Technologies in Mechanical Engineering (ITME 2012), KIET Ghaziabad, U.P., Paper ID: ITME 201202, Page No. 225 – 229.
  • 9 Anish Kumar Singh, Jitendra Kumar Chauhan, Sanjeev Kumar Gupta, 24 – 25 August 2012, “Design and CFD Analysis of Contraction Wall Profile of Open Circuit Blow Down Type Wind Tunnel”, 1st International Conference on Innovative Technologies in Mechanical Engineering (ITME 2012), KIET Ghaziabad, U.P., Paper ID: ITME 201204, Page No. 26 – 32.
  • 10 Kuldeep Singh, Sanjeev Kumar Gupta, Ajay Pratap Singh, 15 – 18 December 2011, “Active Flow Control using Vortex Generator Jet”, 26th Indian Engineering Congress, Institution of Engineers, Karnataka State Centre, Benguluru.
  • 11 Jitendra Dixit, Pankaj Tiwari, Sanjeev Kumar Gupta, Pratibha Singh, Harshit Gupta, 10 -12 November 2011, “Educated Unemployed: A New Challenge before Sustainable Education”, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 150 – 156, ISBN: 978 – 93 – 81583 – 10 – 4.
  • 12 Sanjeev Kumar Gupta, DeeptiSoni, Bhupendra Singh, 10 -12 November 2011, “Major Thrust to begin the Work of Indian Education for Sustainable Development of Society and Nation”, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number : 143 – 149, ISBN: 978 – 93 – 81583 – 10 – 4.
  • 13 Sanjeev Kumar Gupta, et al. 10 -12 November 2011, “Modeling of Relative Specific Energy before and after the Hydraulic Jump in Horizontal Prismatic Channel”, International Conference on Sustainable Manufacturing: Issue, Trend and Practices (ICSM 2011), BITS Pilani, Rajasthan, Page number: 343 – 350, ISBN: 978 – 93 – 81583 – 10 – 4.
  • 14 Ajay Pratap Singh, AkshoyRanjan Paul, Sanjeev Kumar Gupta, Anuj Jain, 6 – 8 June 2011, “Experimental Analysis of Flow Separation Control over a Hump”, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, Paper No: TF 10, Page Numbers: 318 – 322.
  • 15 V. K. Dwivedi, Sanjeev Kumar Gupta, 6 – 8 June 2011, “Finite Difference Method Analysis of Hybrid Bearing”, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, Paper No: DD 84, Page Numbers: 240 – 244.
  • 16 Sanjeev Kumar Gupta, et al., 6 – 8 June 2011, “Modeling of Sequent Depth Ratio and Relative Height of the Hydraulic Jump in Horizontal Prismatic Channel”, 5th International Conference on Advances in Mechanical Engineering (ICAME – 2011), S. V. NIT Surat, Gujarat, Paper No – TF 60, Page Numbers: 452 – 456.
  • 17 Sanjeev Kumar Gupta, et al., 26 – 27 February 2011, “Present Scenario of Renewable Energy Resources and its Utilization in India”, International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, Paper No. 118, Page Numbers 754 - 761, ISBN: 93 – 80697 – 69 – 4.
  • 18 Sanjeev Kumar Gupta, et al., 26 – 27 February 2011, “Paradigm Change in Indian Education for Sustainable Development of Society and Nation”, International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, Paper No. 147, Page Numbers 980 - 989 , ISBN. 93 – 80697 – 69 – 4.
  • 19 Sanjeev Kumar Gupta, et al., 26 – 27 February 2011, “Modeling of Dissipation Index and Efficiency of Hydraulic Jump in Sloping Prismatic Channels”, International Conference on Recent Trends in Engineering, Technology & Management, BIET, Jhansi, Paper No. 14, Page Numbers 80 - 85, ISBN. 93 – 80697 – 69 – 4.
  • 20 Sanjeev Kumar Gupta, R.C. Mehta, 27 – 29 December 2010, “Experimental Study of Hydraulic Jump Characteristics in Sloping Prismatic Channels”, 5th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM 2010), Department of Aerospace Engineering, IIT Kharagpur, Paper No- 0045, ISBN. 978-93-80813-03-05.
  • 21 Sanjeev Kumar Gupta, et al. 5 – 7 December 2010, “Modeling of Relative Length and Relative Energy Loss of Hydraulic Jump in Sloping Prismatic Channels for Environmental Hazards Control”, 2nd International Conference on Climate Change and Sustainable Management of Natural Resources, IASCA, ITM Universe Gwalior, Paper No – CP 77

National Conferences

  • 1 Sanjeev Kumar Gupta, R. C. Mehta, 02 -03 June 2017, “Empirical Formulation of Jump Characteristics in Horizontal Channel”, National Conference on Recent Advances in Mechanical Engineering (NCRAME 2017), pp: 25 -27, ISBN: 978-93-86256-88-1
  • 2 Vishal Yadav, Suprabh Dixit, Sanjeev Kumar Gupta, 4 – 6 July 2013, “Computational Analysis of Flow behind a Wake of a Circular Cylinder, Indian Conference on Applied Mechanics (INCAM 2013), IIT Chennai, Madras, Paper ID: FM12, pp:224-225, ISBN:978-93-5137-273-8.
  • 3 UjjwalTandon, Shivam Jindal, Tarun Sharma, Sanjeev Kumar Gupta, 4 – 6 July 2013, “Computational Analysis of Flow Separation over Backward Facing Step, Indian Conference on Applied Mechanics (INCAM 2013), IIT Chennai, Madras, Paper ID: FM11, pp: 222-223ISBN:978-93-5137-273-8.
  • 4 Sanjeev Kumar Gupta et.al., 27 – 28 November 2010, “Geothermal Energy Resources in India: A Review”, National Conference on Advance in Mechanical Engineering, Mechanical Engineering Section University Polytechnic, Aligarh Muslim University, Page Number 263-2666, ISBN: 978-93-80697-33-8.
  • 5 Sanjeev Kumar Gupta, R. C. Mehta, 9-10 July 2010, “Modeling of Hydraulic Jump Characteristics in Horizontal Prismatic Channels”, Golden Jubilee National Conference on Modeling and Simulation in Heat Transfer and Fluid Flow (MSHTFF), NIT Jamshedpur, Paper No- MSHTFF 03.