Faculty

Admission Query

Submit

Mr. Bharat Singh

  • Assistant Professor
    Institute of Engineering & Technology

  • Department

    Department of Mechanical Engineering

  • Contact Details:

    Email : bharat.singh@gla.ac.in

    Contact Number :8273113063

  • Experience

    8.5 Years

  • Qualifications

    • PhD (2016) (Pursuing)
    • M.Tech in Mechanical Engg (Spl. In Welding and Fabrication) (2013): Sant Longowal Institute of Engg and Technology Sangrur Punjab (National Institute Established by MHRD Govt. of India) Sangrur Punjab India with 9.85 CGPA (First Rank)
    • B. Tech.in Mechanical Engineering (2009): Uttar Pradesh Technical University Lucknow U.P., India

  • Ph.D

    Thesis Supervised

  • Awarded/ CompletedNIL

    WorkingNIL

  • Postgraduate

    Thesis Supervised

  • Awarded/ CompletedNIL

    WorkingNIL

Research Publication

  • 01Bharat Singh, Piyush Singhal, Kuldeep Saxena (2020) Influences of Latent Heat on Temperature Field, Weld Bead Dimensions and Melting Efficiency During Welding Simulation, Journal of Metals and Materials International (SCI Indexed Journal Springer) (Accepted, In Press) DOI: 10.1007/s12540-020-00638-4
  • 02Bharat Singh, Piyush Singhal, Kuldeep Saxena (2020) Effect of Transverse Speed on Mechanical and Microstructural Properties of Friction Stir welded Aluminium AA2024-T351, Journal of Advances in Materials and Processing Technologies (Scopus Indexed, Taylor & Francis)DOI: 10.1080/2374068X.2020.1728642

Paper Published in Refereed International Conference Proceedings/Journal

  • 01Bharat Singh, Siddharth Chandel, Piyush Singhal “Investigation of Mechanical properties of Synthesized AA2024-T351/SiO2 Metal Matrix Nano-Composite’’ (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier)
  • 02Veneet Kumar, Bharat Singh*, Himanshu, Siddharth Chandel, Piyush Singhal “Evaluation of EDM Characteristics of Synthesised AA2024-2 & 3wt% SiO2 Metal Matrix Nanocomposite (MMNC)” (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier)
  • 03Raghav Srivastava, Bharat Singh, Kuldeep Kumar Saxena (2020) Influence of S and Mn on Mechanical Properties and microstructure of Grey Cast Iron: An Overview (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier)
  • 04Soni Kumari, Pankaj Sonia, Bharat Singh, Kumar Abhishek, Kuldeep K. Saxena Optimization of Surface Roughness in EDM of Pure Magnesium (Mg) Using TLBO (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier)
  • 05Bharat Singh, Piyush Singhal, Kuldeep K Saxena (2019) “Investigation of Thermal Efficiency and Depth of Penetration during GTAW Process” (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier) vol.18 (2019) pp.2962–2969
  • 06Ashutosh Pratap Singh, Bharat Singh, Kuldeep K Saxena (2019) “Precipitation Behaviour of Microalloyed Steel During Hot Deformation” (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier) Vol. 18 (2019) pp. 4821–4825
  • 07Aditya N Chaudhari, Kartikey Dixit, Gursimer S Bhatia, Bharat Singh, Piyush Singhal Kuldeep K Saxena “Welding Behaviour of Duplex Stainless Steel AISI 2205: A Review” (Accepted) published in Materials Today: Proceedings (Scopus Indexed Journal Elsevier) vol.18 (2019) pp.2731–2737.)
  • 08Bharat Singh, Piyush Singhal, Avdhesh Sharma (2018) “Multiobjective Optimization of Submerged Arc Welding Parameters on AISI 5130 Alloy Steel using Taguchi Method” International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-7, Issue-COMET, April 2018 (Scopus Indexed Journal)
  • 09Avdhesh Kumar Sharma, Gaurav Bhardwaj, Bharat Singh (2018) “Experimental Investigation for Optimization of Process Parameters of EDM for Titanium Grade 5 Alloy [TI6AL4V] using Taguchi Method and Promethee Method” International Journal of Engineering and Advanced Technology (IJEAT) India ISSN: 2249 – 8958, Volume-7, Issue-COMET, April 2018 (Scopus Indexed Journal)
  • 10Bharat Singh, Piyush Singhal (2016), Ergonomic Design Analysis of Welding Workshop of Educational Institutions, International Conference on Management of Ergonomic Design, Industrial Safety and Healthcare Systems (MESH 2016), Indian Institute of Technology IIT, Kharagpur, West Bengal India Dec. 20-23, 2016, Paper no. MESH-16/ED/009.
  • 11Bharat Singh, Piyush Singhal (2016) “Work related musculoskeletal disorders (WMSDs) risk assessment for different welding positions and processes” 14th annual International Ergonomics Conference “Humanizing Work and Work Environment (HWWE 2016)” December, 2016, Dr. BR Ambedkar National Institute of Technology (NIT), Jalandhar, Punjab.
  • 12Ravindra K Saxena, Bharat Singh (2014) “EEffect of incorporating Latent heat in Arc welding simulation” International Mechanical Engineering Congress 2014 (IMEC 2014), NIT Trichy Tamil Nadu India.

National/International Workshop Attended

  • 01Attended Five Days Global Initiative Academics Networks (GIAN) Workshop on “Welding Metallurgy and Weldability of Steels and Stainless steels” during December 11-15 2017, organized by Indian Institute of Technology (IIT) Madras Tamil Nadu India.
  • 02Attended Three Days Workshop on “Engineering Problem Solving Approaches 2018 (ESPA 2018), during 02-04 February 2018 technically supported Process and Product Development Centre (PPDC) Agra unit of Ministry of Micro Small Medium Enterprises MSME (Govt of India), organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura.
  • 03Attended Three Days Workshop on “Lean Six Sigma Yellow Belt 2017” during April 28- 30, 2017 technically supported Process and Product Development Centre (PPDC) Agra unit of Ministry of Micro Small Medium Enterprises MSME (Govt of India), organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura.
  • 04Attended Three Days Workshop on “Entrepreneurship Awareness Camp, under DST NIMAT Project Govt of India” during August 17-19, 2017 technically supported Process and Product Development Centre (PPDC) Agra unit of Ministry of Micro Small Medium Enterprises MSME (Govt of India), organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura.
  • 05Attended Two Days Workshop on “Analysis of Fluid Flow with ANSYS” (AFFA 2016) on Saturday - Sunday, April 09- 10, 2016 technically supported by American Society of Mechanical Engineers (ASME), organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura.

National/International Workshop Organised/Conducted

  • 01Successfully organized Two Days Short Term Training Program(STTP) on "Machine Learning & Artificial Neural Network in Mechanical Applications " during Saturday & Sunday i.e. 23 - 24, Nov.,2019 technically supported Process and Product Development Centre (PPDC) Agra unit of Ministry of Micro Small Medium Enterprises MSME (Govt of India), at GLA University Mathura.(as an Event Co-Ordinator)
  • 02Successfully organized one Day Technical Program on “Parameters Optimization of Electro Discharge Machining Using MINITAB on January 23, 2019 technically supported Hammer Club, organized by Department of Mechanical Engineering, Institute of Engineering & Technology, GLA University Mathura. (As a Resource Person)
  • 03Successfully organized Three Days Short Term Training Program (STTP) on “Soft Automation Using PLC during 17-19 January 2019 technically supported Process and Product Development Centre (PPDC) Agra unit of Ministry of Micro Small Medium Enterprises MSME (Govt of India), at GLA University Mathura.(as an Event Co-Ordinator)
  • 04Successfully organized Three Days Workshop on “Engineering Problem Solving Approaches 2018 (ESPA 2018), during 02-04 February 2018 technically supported Process and Product Development Centre (PPDC) Agra unit of Ministry of Micro Small Medium Enterprises MSME (Govt of India), at GLA University Mathura. (as an Event Co-Ordinator)
  • 05Successfully organized a three days short term course on “Entrepreneurship Awareness Camp” by MSME-TDC (PPDC), Agra from August 17 to August 19 2017 at GLA University Mathura. .(as an Event Co-Ordinator)
  • 06Successfully organized a three days workshop on “Lean Six Sigma Yellow Belt: Quality Improvement and Problem Solving Techniques” by MSME-TDC (PPDC), Agra from April 28 to April 30 2017 at GLA University Mathura. .(as an Event Co-Ordinator)
  • 01Member of The Indian Institute of Metals
  • 02Qualified the Geometrical Dimensioning and Tolerances (GD & T) course Certified from TÜV SÜD South Asia.

Work Achievement

  • 01Qualified GATE in 2011, 2012,2013,
  • 02Received Gold Medal for securing first position in M. Tech (9.85 CGPA).
  • 03Selected in Shipping Corporation Of India Ltd (Govt. of India Enterprises) as a Trainee Marine Engineer (TME).
  • 04Worked as a Research Assistant in SLIET Sangrur Punjab under TEQIP-II (Govern by MHRD) Scheme

Academic Supervision: Bachelor of Technology (B.Tech.)

  • 03A Modeling of arc welding by Using Finite Element Method (2016 Batch Students)
  • 03Improvement in Weldability of Stainless steel (2017 Batch Students)

Department Level Responsibilities

  • 01Class Advisor
  • 02Club In charge
  • 03Member of Cultural Activities

Proficiency in Technical Tools

  • 01 MATLAB
  • 02MINITAB
  • 03CATIA

Area of Research Interest

  • 01 Advance Welding and fabrication, Welding Metallurgy, Weld Heat Transfer, Modeling of Manufacturing Process